Radiation safety based on the sky shine effect in reactor

In the reactor operation, neutrons and gamma rays are the most dominant radiation. As protection, lead and concrete shields are built around the reactor. However, the radiation can penetrate the water shielding inside the reactor pool. This incident leads to the occurrence of sky shine where a physical phenomenon of nuclear radiation sources was transmitted panoramic that extends to the environment. The effect of this phenomenon is caused by the fallout radiation into the surrounding area which causes the radiation dose to increase. High doses of exposure cause a person to have stochastic effects or deterministic effects. Therefore, this study was conducted to measure the radiation dose from sky shine effect that scattered around the reactor at different distances and different height above the reactor platform. In this paper, the analysis of the radiation dose of sky shine effect was measured using the experimental metho

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

pTNoC: Probabilistically time-analyzable tree-based NoC for mixed-criticality systems

The use of networks-on-chip (NoC) in real-time safety-critical multicore systems challenges deriving tight worst-case execution time (WCET) estimates. This is due to the complexities in tightly upper-bounding the contention in the access to the NoC among running tasks. Probabilistic Timing Analysis (PTA) is a powerful approach to derive WCET estimates on relatively complex processors. However, so far it has only been tested on small multicores comprising an on-chip bus as communication means, which intrinsically does not scale to high core counts. In this paper we propose pTNoC, a new tree-based NoC design compatible with PTA requirements and delivering scalability towards medium/large core counts. pTNoC provides tight WCET estimates by means of asymmetric bandwidth guarantees for mixed-criticality systems with negligible impact on average performance. Finally, our implementation results show the reduced area and power costs of the pTNoC.The research leading to these results has received funding from the European Community’s Seventh Framework Programme [FP7/2007-2013] under the PROXIMA Project (www.proxima-project.eu), grant agreement no 611085. This work has also been partially supported by the Spanish Ministry of Science and Innovation under grant TIN2015-65316-P and the HiPEAC Network of Excellence. Mladen Slijepcevic is funded by the Obra Social Fundación la Caixa under grant Doctorado “la Caixa” - Severo Ochoa. Carles Hern´andez is jointly funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER funds through grant TIN2014-60404-JIN. Jaume Abella has been partially supported by the MINECO under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717.Peer ReviewedPostprint (author's final draft

A case study for NoC based homogeneous MPSoC architectures

The many-core design paradigm requires flexible and modular hardware and software components to provide the required scalability to next-generation on-chip multiprocessor architectures. A multidisciplinary approach is necessary to consider all the interactions between the different components of the design. In this paper, a complete design methodology that tackles at once the aspects of system level modeling, hardware architecture, and programming model has been successfully used for the implementation of a multiprocessor network-on-chip (NoC)-based system, the NoCRay graphic accelerator. The design, based on 16 processors, after prototyping with field-programmable gate array (FPGA), has been laid out in 90-nm technology. Post-layout results show very low power, area, as well as 500 MHz of clock frequency. Results show that an array of small and simple processors outperform a single high-end general purpose processo

A scalable multi-core architecture with heterogeneous memory structures for Dynamic Neuromorphic Asynchronous Processors (DYNAPs)

Neuromorphic computing systems comprise networks of neurons that use asynchronous events for both computation and communication. This type of representation offers several advantages in terms of bandwidth and power consumption in neuromorphic electronic systems. However, managing the traffic of asynchronous events in large scale systems is a daunting task, both in terms of circuit complexity and memory requirements. Here we present a novel routing methodology that employs both hierarchical and mesh routing strategies and combines heterogeneous memory structures for minimizing both memory requirements and latency, while maximizing programming flexibility to support a wide range of event-based neural network architectures, through parameter configuration. We validated the proposed scheme in a prototype multi-core neuromorphic processor chip that employs hybrid analog/digital circuits for emulating synapse and neuron dynamics together with asynchronous digital circuits for managing the address-event traffic. We present a theoretical analysis of the proposed connectivity scheme, describe the methods and circuits used to implement such scheme, and characterize the prototype chip. Finally, we demonstrate the use of the neuromorphic processor with a convolutional neural network for the real-time classification of visual symbols being flashed to a dynamic vision sensor (DVS) at high speed.Comment: 17 pages, 14 figure

HARDWARE DESIGN OF MESSAGE PASSING ARCHITECTURE ON HETEROGENEOUS SYSTEM

Heterogeneous multi/many-core chips are commonly used in today’s top tier supercomputers. Similar heterogeneous processing elements — or, computation ac- celerators — are commonly found in FPGA systems. Within both multi/many-core chips and FPGA systems, the on-chip network plays a critical role by connecting these processing elements together. However, The common use of the on-chip network is for point-to-point communication between on-chip components and the memory in- terface. As the system scales up with more nodes, traditional programming methods, such as MPI, cannot effectively use the on-chip network and the off-chip network, therefore could make communication the performance bottleneck. This research proposes a MPI-like Message Passing Engine (MPE) as part of the on-chip network, providing point-to-point and collective communication primitives in hardware. On one hand, the MPE improves the communication performance by offloading the communication workload from the general processing elements. On the other hand, the MPE provides direct interface to the heterogeneous processing ele- ments which can eliminate the data path going around the OS and libraries. Detailed experimental results have shown that the MPE can significantly reduce the com- munication time and improve the overall performance, especially for heterogeneous computing systems because of the tight coupling with the network. Additionally, a hybrid “MPI+X” computing system is tested and it shows MPE can effectively of- fload the communications and let the processing elements play their strengths on the computation

Configurable data center switch architectures

In this thesis, we explore alternative architectures for implementing con_gurable Data Center Switches along with the advantages that can be provided by such switches. Our first contribution centers around determining switch architectures that can be implemented on Field Programmable Gate Array (FPGA) to provide configurable switching protocols. In the process, we identify a gap in the availability of frameworks to realistically evaluate the performance of switch architectures in data centers and contribute a simulation framework that relies on realistic data center traffic patterns. Our framework is then used to evaluate the performance of currently existing as well as newly proposed FPGA-amenable switch designs. Through collaborative work with Meng and Papaphilippou, we establish that only small-medium range switches can be implemented on today's FPGAs. Our second contribution is a novel switch architecture that integrates a custom in-network hardware accelerator with a generic switch to accelerate Deep Neural Network training applications in data centers. Our proposed accelerator architecture is prototyped on an FPGA, and a scalability study is conducted to demonstrate the trade-offs of an FPGA implementation when compared to an ASIC implementation. In addition to the hardware prototype, we contribute a light weight load-balancing and congestion control protocol that leverages the unique communication patterns of ML data-parallel jobs to enable fair sharing of network resources across different jobs. Our large-scale simulations demonstrate the ability of our novel switch architecture and light weight congestion control protocol to both accelerate the training time of machine learning jobs by up to 1.34x and benefit other latency-sensitive applications by reducing their 99%-tile completion time by up to 4.5x. As for our final contribution, we identify the main requirements of in-network applications and propose a Network-on-Chip (NoC)-based architecture for supporting a heterogeneous set of applications. Observing the lack of tools to support such research, we provide a tool that can be used to evaluate NoC-based switch architectures.Open Acces