Summary

Power MOSFETs require a gate drive circuit to translate the on/off signals from an analog or digital controller into the power signals necessary to control the MOSFET. This paper provides details of MOSFET switching action in applications with clamped inductive load, when used as a secondary synchronous rectifier, and driving pulse/gate drive transformers. Potential driver solutions, including discrete and integrated driver designs, are discussed. MOSFET driver datasheet current ratings are examined and circuits are presented to assist with evaluating the performance of drivers on the lab bench

A clamping circuit based voltage measurement system for high frequency flying capacitor multilevel inverters

In an era where high-frequency flying capacitor (FC) multilevel inverters (MLI) are increasingly gaining attention in energy conversion systems that push the boundaries of power density, the need for a compact, fast, and accurate FC voltage monitoring is also increasing. In this paper we designed and developed a new FC measurement system, based on precise sampling of the inverter switching node voltage, through a bidirectional clamping circuit. The deviation of FC voltages from their nominal values are extracted by solving a set of linear equations. With a single sensor per phase and no isolation requirements, as opposed to dozens of sensors in traditional FC monitoring, our approach results in significantly lower cost, complexity, and circuit-size. Detailed device-level simulations in LTspice and system-scale simulations in Matlab, validate the accuracy and speed of the proposed measurement system and the balancing strategy in steady state, abrupt load change and imbalance conditions. Experiments carried out in a 3-phase Gallium-Nitride 5-level inverter prototype, reveal a gain in precision and bandwidth that is more than 30 times that of conventional methods, at a fraction of their cost and footprint. The recorded performance renders the developed sensor an ideal solution for fast MLIs based on wide-bandgap technolog

Optogenetic feedback control of neural activity

Optogenetic techniques enable precise excitation and inhibition of firing in specified neuronal populations and artifact-free recording of firing activity. Several studies have suggested that optical stimulation provides the precision and dynamic range requisite for closed-loop neuronal control, but no approach yet permits feedback control of neuronal firing. Here we present the ‘optoclamp’, a feedback control technology that provides continuous, real-time adjustments of bidirectional optical stimulation in order to lock spiking activity at specified targets over timescales ranging from seconds to days. We demonstrate how this system can be used to decouple neuronal firing levels from ongoing changes in network excitability due to multi-hour periods of glutamatergic or GABAergic neurotransmission blockade in vitro as well as impinging vibrissal sensory drive in vivo. This technology enables continuous, precise optical control of firing in neuronal populations in order to disentangle causally related variables of circuit activation in a physiologically and ethologically relevant manner.National Science Foundation (U.S.). Graduate Research FellowshipNational Science Foundation (U.S.). Integrative Graduate Education and Research Traineeshi

A comprehensive review on modular multilevel converters, submodule topologies, and modulation techniques

The concept of the modular multilevel converter (MLC) has been raising interest in research in order to improve their performance and applicability. The potential of an MLC is enormous, with a great focus on medium- and high-voltage applications, such as solar photovoltaic and wind farms, electrified railway systems, or power distribution systems. This concept makes it possible to overcome the limitation of the semiconductors blocking voltages, presenting advantageous characteristics. However, the complexity of implementation and control presents added challenges. Thus, this paper aims to contribute with a critical and comparative analysis of the state-of-the-art aspects of this concept in order to maximize its potential. In this paper, different power electronics converter topologies that can be integrated into the MLC concept are presented, highlighting the advantages and disadvantages of each topology. Nevertheless, different modulation techniques used in an MLC are also presented and analyzed. Computational simulations of all the modulation techniques under analysis were developed, based on four cascaded full-bridge topologies. Considering the simulation results, a comparative analysis was possible to make regarding the symmetry of the synthesized waveforms, the harmonic content, and the power distribution in each submodule constituting the MLC.This work has been supported by FCT—Fundação para a Ciência e Tecnologia, within the R&D Units Project Scope UIDB/00319/2020. Mr. Luis A. M. Barros is supported by the doctoral scholarship PD/BD/143006/2018, granted by the Portuguese FCT foundation

The application of resonant-mode techniques to off-line converters for the commercial market

This thesis presents the work performed by the author on the application of resonantmode techniques to commercially-orientated off-line converters. An extensive review of resonant-mode topologies leads to the development of a method of categorisation of these topologies which allows a greater comprehension of their properties. The categories of converter thus obtained are the conventional resonant converter, the quasi-resonant converter, and the gap-resonant converter. The gap-resonant converter is selected for further investigation. An analysis reveals the limited load and input voltage capabilities of this converter, and hence leads to the introduction of a pre-regulating converter to improve reliability and commercial viability. High-frequency techniques are explored and reported, and new techniques are developed in several areas in order to extend the concept of the gap-resonant converter to a realworld practical design. Subjects explored include the high speed driving of power MOSFETs, MOSFET and diode switching losses, high frequency magnetic materials and core losses, and skin and proximity effects. The techniques developed are used in the design of a 30OW, off-line converter with an input voltage range of 165V to 380V after rectification, and a ten-to-one output load range

Advances in Optical Amplifiers

Optical amplifiers play a central role in all categories of fibre communications systems and networks. By compensating for the losses exerted by the transmission medium and the components through which the signals pass, they reduce the need for expensive and slow optical-electrical-optical conversion. The photonic gain media, which are normally based on glass- or semiconductor-based waveguides, can amplify many high speed wavelength division multiplexed channels simultaneously. Recent research has also concentrated on wavelength conversion, switching, demultiplexing in the time domain and other enhanced functions. Advances in Optical Amplifiers presents up to date results on amplifier performance, along with explanations of their relevance, from leading researchers in the field. Its chapters cover amplifiers based on rare earth doped fibres and waveguides, stimulated Raman scattering, nonlinear parametric processes and semiconductor media. Wavelength conversion and other enhanced signal processing functions are also considered in depth. This book is targeted at research, development and design engineers from teams in manufacturing industry, academia and telecommunications service operators

Multi-objective optimization of power electronic converters

L'abstract è presente nell'allegato / the abstract is in the attachmen