265 research outputs found
Optical Coherence Tomography and Its Non-medical Applications
Optical coherence tomography (OCT) is a promising non-invasive non-contact 3D imaging technique that can be used to evaluate and inspect material surfaces, multilayer polymer films, fiber coils, and coatings. OCT can be used for the examination of cultural heritage objects and 3D imaging of microstructures. With subsurface 3D fingerprint imaging capability, OCT could be a valuable tool for enhancing security in biometric applications. OCT can also be used for the evaluation of fastener flushness for improving aerodynamic performance of high-speed aircraft. More and more OCT non-medical applications are emerging. In this book, we present some recent advancements in OCT technology and non-medical applications
Optical coherence tomography methods using 2-D detector arrays
Optical coherence tomography (OCT) is a non-invasive, non-contact optical technique that allows cross-section imaging of biological tissues with high spatial resolution, high sensitivity and high dynamic range. Standard OCT uses a focused beam to illuminate a point on the target and detects the signal using a single photodetector. To acquire transverse information, transversal scanning of the illumination point is required. Alternatively, multiple OCT channels can be operated in parallel simultaneously; parallel OCT signals are recorded by a two-dimensional (2D) detector array. This approach is known as Parallel-detection OCT. In this thesis, methods, experiments and results using three parallel OCT techniques, including full -field (time-domain) OCT (FF-OCT), full-field swept-source OCT (FF-SS-OCT) and line-field Fourier-domain OCT (LF-FD-OCT), are presented. Several 2D digital cameras of different formats have been used and evaluated in the experiments of different methods. With the LF-FD-OCT method, photography equipment, such as flashtubes and commercial DSLR cameras have been equipped and tested for OCT imaging. The techniques used in FF-OCT and FF-SS-OCT are employed in a novel wavefront sensing technique, which combines OCT methods with a Shack-Hartmann wavefront sensor (SH-WFS). This combination technique is demonstrated capable of measuring depth-resolved wavefront aberrations, which has the potential to extend the applications of SH-WFS in wavefront-guided biomedical imaging techniques
Photonic Time-Stretch Enabled High Throughput Microwave and MM-Wave Interferometry Applied to Fibre Grating Sensors and Non-Contact Measurement
The research presented in this thesis is focused towards developing real-time, high-speed applications, employing ultrafast optical microwave generation and characterisation techniques. This thesis presents a series of experiments wherein mode-locked laser pulses are utilised. Photonics-based microwave and MM-Wave generation and detection are explored and employed for applications pertaining to fibre grating sensors and non-contact measurement. The application concepts leverage techniques from optical coherence tomography and non-destructive evaluation of turbid media. In particular, I use the principle of dispersion-induced photonic Time-Stretch to slow down high-speed waveforms to speeds usable by state-of-the-art photo-detectors and digital signal processors. The concept of photonic time-stretch is applied to map instantaneous microwave frequency to the time instant of the signal, which in turn is related to spatial location as established by the space-wavelength-time conversions. The experimental methods applied throughout this thesis is based upon Michelson interferometer architecture.
My original contribution to knowledge is the realisation of Photonics-based, single tone, and chirped microwave and MM-Wave pulse generation applied to deciphering physical strain profile along the length of a chirped fibre Bragg grating employed in a Michelson interferometer configuration. This interrogation scheme allows intra-grating high-resolution, high-speed, and temperature independent strain measurement. This concept is further extended to utilise photonic generation of microwave pulses to characterise surface profile information of thin film and thin plate infrared transparent slides of variable thickness setup in a Michelson interferometer architecture. The method basis for photonically generated high-frequency microwave signals utilises the principle of photonic Time-Stretch. The research was conducted in the Photonics Lab at the University of Kent. In addition, the photonically generated microwave/ MM-Wave pulses is utilised as a potential broadband frequency-swept source for non-contact measurement of turbid media. Investigation of the proof-of-concept based on an MM-Wave coherence tomography set-up is implemented at Vrije Universiteit Brussel (VUB), Department of Electronics and Informatics (ETRO)
Recommended from our members
Remote laser spectroscopy at standoff distances for heritage applications
In this project, remote standoff laser spectroscopy systems working at 3–15 m have been developed for cultural heritage research, employing Raman spectroscopy, laser induced breakdown spectroscopy (LIBS), and laser induced fluorescence spectroscopy (LIF). To address the problems encountered during in situ analysis due to environmental restrictions, the adoption of remote techniques offers advantages such as convenient deployment on the ground, allowing sensitive measurements over long integration time and there is no need to redeploy for different areas of interest. The research focuses on the design and development of remote standoff laser spectroscopy systems with special needs in heritage research considered, as well as their application for in situ analysis.
A remote standoff Raman system was developed and optimised. It is the first of its kind that is dedicated to cultural heritage research. It can identify most of common historic artist pigments. A daylight subtraction procedure enables the remote standoff Raman system to operate in the presence of indoor ambient light. Laser induced degradation effect was studied using various laser configurations on a range of common pigments. The remote standoff Raman system is proved to be safe for the analysis of most pigments tested when using typical integration time required for Raman measurements. In situ remote macro-Raman mapping is achieved in two field campaigns, revealing the pigments distribution on wall paintings and salt distribution in historical buildings in costal environments.
A remote standoff LIBS system was developed. Assisted with Raman and reflectance spectroscopy, a multimodal approach allowing in situ standoff depth-resolved material identification of wall paintings was demonstrated for the first time. The combined elemental, molecular and reflectance information contributes to a more complete data interpretation. Consequently, the stratigraphy of whitewashed wall paintings was successfully uncovered in a unique field campaign
- …