Physiology-Aware Rural Ambulance Routing

In emergency patient transport from rural medical facility to center tertiary hospital, real-time monitoring of the patient in the ambulance by a physician expert at the tertiary center is crucial. While telemetry healthcare services using mobile networks may enable remote real-time monitoring of transported patients, physiologic measures and tracking are at least as important and requires the existence of high-fidelity communication coverage. However, the wireless networks along the roads especially in rural areas can range from 4G to low-speed 2G, some parts with communication breakage. From a patient care perspective, transport during critical illness can make route selection patient state dependent. Prompt decisions with the relative advantage of a longer more secure bandwidth route versus a shorter, more rapid transport route but with less secure bandwidth must be made. The trade-off between route selection and the quality of wireless communication is an important optimization problem which unfortunately has remained unaddressed by prior work. In this paper, we propose a novel physiology-aware route scheduling approach for emergency ambulance transport of rural patients with acute, high risk diseases in need of continuous remote monitoring. We mathematically model the problem into an NP-hard graph theory problem, and approximate a solution based on a trade-off between communication coverage and shortest path. We profile communication along two major routes in a large rural hospital settings in Illinois, and use the traces to manifest the concept. Further, we design our algorithms and run preliminary experiments for scalability analysis. We believe that our scheduling techniques can become a compelling aid that enables an always-connected remote monitoring system in emergency patient transfer scenarios aimed to prevent morbidity and mortality with early diagnosis treatment.Comment: 6 pages, The Fifth IEEE International Conference on Healthcare Informatics (ICHI 2017), Park City, Utah, 201

On Compact Routing for the Internet

While there exist compact routing schemes designed for grids, trees, and Internet-like topologies that offer routing tables of sizes that scale logarithmically with the network size, we demonstrate in this paper that in view of recent results in compact routing research, such logarithmic scaling on Internet-like topologies is fundamentally impossible in the presence of topology dynamics or topology-independent (flat) addressing. We use analytic arguments to show that the number of routing control messages per topology change cannot scale better than linearly on Internet-like topologies. We also employ simulations to confirm that logarithmic routing table size scaling gets broken by topology-independent addressing, a cornerstone of popular locator-identifier split proposals aiming at improving routing scaling in the presence of network topology dynamics or host mobility. These pessimistic findings lead us to the conclusion that a fundamental re-examination of assumptions behind routing models and abstractions is needed in order to find a routing architecture that would be able to scale ``indefinitely.''Comment: This is a significantly revised, journal version of cs/050802

Multimedia delivery in the future internet

The term “Networked Media” implies that all kinds of media including text, image, 3D graphics, audio and video are produced, distributed, shared, managed and consumed on-line through various networks, like the Internet, Fiber, WiFi, WiMAX, GPRS, 3G and so on, in a convergent manner [1]. This white paper is the contribution of the Media Delivery Platform (MDP) cluster and aims to cover the Networked challenges of the Networked Media in the transition to the Future of the Internet. Internet has evolved and changed the way we work and live. End users of the Internet have been confronted with a bewildering range of media, services and applications and of technological innovations concerning media formats, wireless networks, terminal types and capabilities. And there is little evidence that the pace of this innovation is slowing. Today, over one billion of users access the Internet on regular basis, more than 100 million users have downloaded at least one (multi)media file and over 47 millions of them do so regularly, searching in more than 160 Exabytes1 of content. In the near future these numbers are expected to exponentially rise. It is expected that the Internet content will be increased by at least a factor of 6, rising to more than 990 Exabytes before 2012, fuelled mainly by the users themselves. Moreover, it is envisaged that in a near- to mid-term future, the Internet will provide the means to share and distribute (new) multimedia content and services with superior quality and striking flexibility, in a trusted and personalized way, improving citizens’ quality of life, working conditions, edutainment and safety. In this evolving environment, new transport protocols, new multimedia encoding schemes, cross-layer inthe network adaptation, machine-to-machine communication (including RFIDs), rich 3D content as well as community networks and the use of peer-to-peer (P2P) overlays are expected to generate new models of interaction and cooperation, and be able to support enhanced perceived quality-of-experience (PQoE) and innovative applications “on the move”, like virtual collaboration environments, personalised services/ media, virtual sport groups, on-line gaming, edutainment. In this context, the interaction with content combined with interactive/multimedia search capabilities across distributed repositories, opportunistic P2P networks and the dynamic adaptation to the characteristics of diverse mobile terminals are expected to contribute towards such a vision. Based on work that has taken place in a number of EC co-funded projects, in Framework Program 6 (FP6) and Framework Program 7 (FP7), a group of experts and technology visionaries have voluntarily contributed in this white paper aiming to describe the status, the state-of-the art, the challenges and the way ahead in the area of Content Aware media delivery platforms

A Survey on the Contributions of Software-Defined Networking to Traffic Engineering

Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567 Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-

Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

ROSA: Realistic Open Security Architecture for active networks

Proceedings of IFIP-TC6 4th International Working Conference, IWAN 2002 Zurich, Switzerland, December 4–6, 2002.Active network technology enables fast deployment of new network services tailored to the specific needs of end users, among other features. Nevertheless, security is still a main concern when considering the industrial adoption of this technology. In this article we describe an open security architecture for active network platforms that follow the discrete approach. The proposed solution provides all the required security features, and it also grants proper scalability of the overall system, by using a distributed key-generation algorithm. The performance of the proposal is validated with experimental data obtained from a prototype implementation of the solution.Publicad

Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks