Performance evaluation of non-prefiltering vs. time reversal prefiltering in distributed and uncoordinated IR-UWB ad-hoc networks

Time Reversal (TR) is a prefiltering scheme mostly analyzed in the context of centralized and synchronous IR-UWB networks, in order to leverage the trade-off between communication performance and device complexity, in particular in presence of multiuser interference. Several strong assumptions have been typically adopted in the analysis of TR, such as the absence of Inter-Symbol / Inter-Frame Interference (ISI/IFI) and multipath dispersion due to complex signal propagation. This work has the main goal of comparing the performance of TR-based systems with traditional non-prefiltered schemes, in the novel context of a distributed and uncoordinated IR-UWB network, under more realistic assumptions including the presence of ISI/IFI and multipath dispersion. Results show that, lack of power control and imperfect channel knowledge affect the performance of both non-prefiltered and TR systems; in these conditions, TR prefiltering still guarantees a performance improvement in sparse/low-loaded and overloaded network scenarios, while the opposite is true for less extreme scenarios, calling for the developement of an adaptive scheme that enables/disables TR prefiltering depending on network conditions

Advanced ultrawideband imaging algorithms for breast cancer detection

Ultrawideband (UWB) technology has received considerable attention in recent years as it is regarded to be able to revolutionise a wide range of applications. UWB imaging for breast cancer detection is particularly promising due to its appealing capabilities and advantages over existing techniques, which can serve as an early-stage screening tool, thereby saving millions of lives. Although a lot of progress has been made, several challenges still need to be overcome before it can be applied in practice. These challenges include accurate signal propagation modelling and breast phantom construction, artefact resistant imaging algorithms in realistic breast models, and low-complexity implementations. Under this context, novel solutions are proposed in this thesis to address these key bottlenecks. The thesis first proposes a versatile electromagnetic computational engine (VECE) for simulating the interaction between UWB signals and breast tissues. VECE provides the first implementation of its kind combining auxiliary differential equations (ADE) and convolutional perfectly matched layer (CPML) for describing Debye dispersive medium, and truncating computational domain, respectively. High accuracy and improved computational and memory storage efficiency are offered by VECE, which are validated via extensive analysis and simulations. VECE integrates the state-of-the-art realistic breast phantoms, enabling the modelling of signal propagation and evaluation of imaging algorithms. To mitigate the severe interference of artefacts in UWB breast cancer imaging, a robust and artefact resistant (RAR) algorithm based on neighbourhood pairwise correlation is proposed. RAR is fully investigated and evaluated in a variety of scenarios, and compared with four well-known algorithms. It has been shown to achieve improved tumour detection and robust artefact resistance over its counterparts in most cases, while maintaining high computational efficiency. Simulated tumours in both homogeneous and heterogeneous breast phantoms with mild to moderate densities, combined with an entropy-based artefact removal algorithm, are successfully identified and localised. To further improve the performance of algorithms, diverse and dynamic correlation weighting factors are investigated. Two new algorithms, local coherence exploration (LCE) and dynamic neighbourhood pairwise correlation (DNPC), are presented, which offer improved clutter suppression and image resolution. Moreover, a multiple spatial diversity (MSD) algorithm, which explores and exploits the richness of signals among different transmitter and receiver pairs, is proposed. It is shown to achieve enhanced tumour detection even in severely dense breasts. Finally, two accelerated image reconstruction mechanisms referred to as redundancy elimination (RE) and annulus predication (AP) are proposed. RE removes a huge number of repetitive operations, whereas AP employs a novel annulus prediction to calculate millions of time delays in a highly efficient batch mode. Their efficacy is demonstrated by extensive analysis and simulations. Compared with the non-accelerated method, RE increases the computation speed by two-fold without any performance loss, whereas AP can be 45 times faster with negligible performance degradation

Antennas for UWB Applications

“Antennas for UWB Applications” chapter deals with an overview of ultrawideband (UWB) antennas used for different applications. Some fundamental and widely used radiators, such as fat monopole, microstrip-fed and coplanar waveguide (CPW)-fed slot antennas, and tapered end-fire antennas are presented. Selected antenna designs are presented in relation to the UWB applications and their dictating radiation and operation principles. The demonstrated UWB antennas include antennas for handheld devices used for personal area network (PAN) communications; antennas for localization and positioning; UWB antennas for radio-frequency identifications (RFIDs); radar antennas for through-wall imaging, for ground-penetrating radar (GPR), and for breast tumor detection; and more generally, UWB antennas used for sensing. For some of the aforementioned applications, UWB antennas with special characteristics are needed, and they are presented and associated with the relevant applications. These include reconfigurable UWB antennas, metamaterial-loaded UWB antennas, and conformal UWB antennas. The usefulness of these special characteristics in comparison with the claimed advantages is critically evaluated. For the UWB applications presented in the chapter, one type or UWB antenna is recommended

Experimental characterization of the radio channel for systems with large bandwidth and multiple antennas

[SPA] Cada día son necesarias comunicaciones mejores y más eficientes, con mayores anchos de banda y mayores tasas de transferencias de datos. Por un lado los sistemas de múltiples antenas, MIMO, surgieron como una técnica para optimizar el uso de la potencia y el espectro. Por otro lado, los sistemas Ultra-Wideband, UWB, han ganado recientemente el interés de la comunidad científica por su gran ancho de banda combinado con su baja potencia de transmisión. A la hora de diseñar y testear nuevos dispositivos de comunicaciones inalámbricas, es esencial poseer un conocimiento preciso del canal de propagación por el que se propagan dichas señales. Esta tesis, se basa en el modelado del canal de propagación para sistemas de gran ancho de banda y múltiples antenas desde un punto de vista experimental. Primeramente se presentan las mejoras y desarrollos realizados en el ámbito de los sistemas de medida del canal, dado que es necesario disponer de equipos adecuados y precisos para realizar adecuadas medidas del canal. Seguidamente, se analiza el canal MIMO-UWB en interiores. Se realiza un análisis en profundidad de varios parámetros, especialmente parámetros de una antena como las pérdidas de propagación, el factor de polarización cruzada o la dispersión del retardo. Finalmente, la tesis particulariza el análisis del canal en un entorno especial como es el caso de túneles. Se realiza un análisis experimental de parámetros de una antena como multi antena para luego evaluar las prestaciones que pueden brindar varias técnicas de diversidad como es en el dominio de la frecuencia, la polarización, el espacio o el tiempo.[ENG] Wireless communications have become essential in our society [Rappaport, 1996], [Parsons, 2000]. Nowadays, people need to be connected everywhere and at any time, and demand faster and enhanced communications every day. New applications requires higher data rates and, therefore, higher bandwidths. On the one hand, Multiple-Input Multiple-Output (MIMO) systems were proposed as one solution to achieve higher data rates and optimize the use of the spectrum. On the other hand, more recently, systems with an ultra large bandwidth, and particularly Ultra-Wideband (UWB) systems, have gained the interest of the scientific community. Such interest is owing to the extremely high data rates offered and its possible coexistence with existing systems due to the its low transmitted power. However, this improvement in mobile communications involves the development and testing of new wireless communications systems. Precise knowledge of the radio channel is an essential issue to design this new devices and, thus, reach such improvement in wireless communications. In general, the modeling of the radio channel can be undertaken in two main ways: Theoretically, where the channel is characterized by means of simulations and theoretical approaches. - Experimentally, where the radio channel is characterized by means of the analysis of measurements carried out in real scenarios. This thesis is mainly focused on the experimental characterization of the radio channel for systems with large bandwidth and multiple antennas (MIMO). However, characterizing experimentally the MIMO wideband channel implies the availability of adequate and accurate channel sounders.Universidad Politécnica de CartagenaUniversité des Sciences et Technologies de Lille (USTL)Programa de doctorado en Tecnologías de la Información y Comunicacione

A Robust and Artifact Resistant Algorithm of Ultrawideband Imaging System for Breast Cancer Detection.

Goal: Ultrawideband radar imaging is regarded as one of the most promising alternatives for breast cancer detection. A range of algorithms reported in literature show satisfactory tumor detection capabilities. However, most of algorithms suffer significant deterioration or even fail when the early-stage artifact, including incident signals and skin-fat interface reflections, cannot be perfectly removed from received signals. Furthermore, fibro-glandular tissue poses another challenge for tumor detection, due to the small dielectric contrast between glandular and cancerous tissues. Methods: This paper introduces a novel Robust and Artifact Resistant (RAR) algorithm, in which a neighborhood pairwise correlation-based weighting is designed to overcome the adverse effects from both artifact and glandular tissues. In RAR, backscattered signals are time-shifted, summed, and weighted by the maximum combination of the neighboring pairwise correlation coefficients between shifted signals, forming the intensity of each point within an imaging area. Results: The effectiveness was investigated using 3-D anatomically and dielectrically accurate finite-difference-time-domain numerical breast models. The use of neighborhood pairwise correlation provided robustness against artifact, and enabled the detection of multiple scatterers. RAR is compared with four well-known algorithms: delay-and-sum, delay-multiply-and-sum, modified-weighted-delay-and-sum, and filtered-delay-and-sum. Conclusion: It has shown that RAR exhibits improved identification capability, robust artifact resistance, and high detectability over its counterparts in most scenarios considered, while maintaining computational efficiency. Simulated tumors in both homogeneous and heterogonous, from mildly to moderately dense breast phantoms, combining an entropy-based artifact removal algorithm, were successfully identified and localized. Significance: These results show the strong potential of RAR for breast cancer screening

Towards UWB microwave hyperthermia for brain cancer treatment

Despite numerous clinical trials demonstrating that microwave hyperthermia is a powerful adjuvant modality in the treatment of cancers, there have been few instances where this method has been applied to brain tumors. The reason is a combination of anatomical and physiological factors in this site that require an extra degree of accuracy and control in the thermal dose delivery which current systems are not able to provide. All clinical applicators available today are in fact based on a single-frequency technology. In terms of treatment planning options, the use of a single frequency is limiting as the size of the focal spot cannot be modified to accommodate the specific tumor volume and location. The introduction of UWB systems opens up an opportunity to overcome these limitations, as they convey the possibility to adapt the focal spot and to use multiple operating frequencies to reduce the power deposition in healthy tissues.In this thesis, we explore whether the current treatment planning methods can be meaningfully translated to the UWB setting and propose new solutions for UWB microwave hyperthermia. We analyze the most commonly used cost-functions for treatment planning optimization and discuss their suitability for use with UWB systems. Then, we propose a novel cost-function specifically tailored for UWB optimization (HCQ). To solve for the HCQ, we further describe a novel, time-reversal based, iterative scheme for the rapid and efficient optimization of UWB treatment plans. We show that the combined use of these techniques results in treatment plans that better exploit the benefits of UWB systems, yielding increased tumor coverage and lower peak temperatures outside the target. Next, we investigate the design possibilities of UWB applicators and introduce a fast E-field approximation scheme. The method can be used for the global optimization of the array parameters with respect to the multiple objectives and requirements of hyperthermia treatments. Together, the proposed solutions represent a step forward in the implementation of patient-specific hyperthermia treatments, increasing their accuracy and precision. The results suggest that UWB microwave hyperthermia for brain cancer treatment is feasible, and motivate the efforts for further development of UWB applicators and systems