Packet CDMA communication without preamble

Code-Division Multiple-Access (CDMA) is one of the leading digital wireless communication methods currently employed throughout the world. Third generation (3G) and future wireless CDMA systems are required to provide services to a large number of users where each user sends data burst only occasionally. The preferred approach is packet based CDMA so that many users share the same physical channel simultaneously. In CDMA, each user is assigned a pseudo-random (PN) code sequence. PN codephase synchronization between received signals and a locally generated replica by the receiver is one of the fundamental requirements for successful implementation of any CDMA technique. The customary approach is to start each CDMA packet with a synchronization preamble which consists of PN code without data modulation. Packets with preambles impose overheads for communications in CDMA systems especially for short packets such as mouse-clicks or ATM packets of a few hundred bits. Thus, it becomes desirable to perform PN codephase synchronization using the information-bearing signal without a preamble. This work uses a segmented matched filter (SMF) which is capable of acquiring PN codephase in the presence of data modulation. Hence the preamble can be eliminated, reducing the system overhead. Filter segmentation is also shown to increase the tolerance to Doppler shift and local carrier frequency offset. Computer simulations in MATLAB® were carried out to determine various performance measures of the acquisition system. Substantial improvement in probability of correct codephase detection in the presence of multiple-access interference and data modulation is obtained by accumulating matched filter samples over several code cycles prior to making the codephase decision. Correct detection probabilities exceeding 99% are indicated from simulations with 25 co-users and 10 kHz carrier frequency offset or Doppler shift by accumulating five or more PN code cycles, using maximum selection detection criterion. Analysis and simulation also shows that cyclic accumulation can improve packet throughput by 50% and by as much as 100% under conditions of high offered traffic and Doppler shift for both fixed capacity and infinite capacity systems

Performance Study of Hybrid Spread Spectrum Techniques

This thesis focuses on the performance analysis of hybrid direct sequence/slow frequency hopping (DS/SFH) and hybrid direct sequence/fast frequency hopping (DS/FFH) systems under multi-user interference and Rayleigh fading. First, we analyze the performance of direct sequence spread spectrum (DSSS), slow frequency hopping (SFH) and fast frequency hopping (FFH) systems for varying processing gains under interference environment assuming equal bandwidth constraint with Binary Phase Shift Keying (BPSK) modulation and synchronous system. After thorough literature survey, we show that hybrid DS/FFH systems outperform both SFH and hybrid DS/SFH systems under Rayleigh fading and multi-user interference. Also, both hybrid DS/SFH and hybrid DS/FFH show performance improvement with increasing spreading factor and decreasing number of hopping frequencies

A low-cost time-hopping impulse radio system for high data rate transmission

We present an efficient, low-cost implementation of time-hopping impulse radio that fulfills the spectral mask mandated by the FCC and is suitable for high-data-rate, short-range communications. Key features are: (i) all-baseband implementation that obviates the need for passband components, (ii) symbol-rate (not chip rate) sampling, A/D conversion, and digital signal processing, (iii) fast acquisition due to novel search algorithms, (iv) spectral shaping that can be adapted to accommodate different spectrum regulations and interference environments. Computer simulations show that this system can provide 110Mbit/s at 7-10m distance, as well as higher data rates at shorter distances under FCC emissions limits. Due to the spreading concept of time-hopping impulse radio, the system can sustain multiple simultaneous users, and can suppress narrowband interference effectively.Comment: To appear in EURASIP Journal on Applied Signal Processing (Special Issue on UWB - State of the Art

Direct sequence spread spectrum techniques in local area networks

This thesis describes the application of a direct sequence spread spectrum modulation scheme to the physical layer of a local area networks subsequently named the SS-LAN. Most present day LANs employ erne form or another of time division multiplexing which performs well in many systems but which is limited by its very nature in real time, time critical and time demanding applications. The use of spread spectrum multiplexing removes these limitations by providing a simultaneous multiple user access capability to the channel which permits each and all nodes to utilise the channel independent of the activity being currently supported by that channel. The theory of spectral spreading is a consequence of the Shannon channel capacity in which the channel capacity may be maintained by the trading of signal to noise ratio for bandwidth. The increased bandwidth provides an increased signal dimensionality which can be utilised in providing noise immunity and/or a simultaneous multiple user environment: the effects of the simultaneous users can be considered as noise from the point of view of any particular constituent signal. The use of code sequences at the physical layer of a LAN permits a wide range of mapping alternatives which can be selected according to the particular application. Each of the mapping techniques possess the general spread spectrum properties but certain properties can be emphasised at the expense of others. The work has Involved the description of the properties of the SS-LAN coupled with the development of the mapping techniques for use In the distribution of the code sequences. This has been followed by an appraisal of a set of code sequences which has resulted in the definition of the ideal code properties and the selection of code families for particular types of applications. The top level design specification for the hardware required in the construction of the SS-LAN has also been presented and this has provided the basis for a simplified and idealised theoretical analysis of the performance parameters of the SS-LAN. A positive set of conclusions for the range of these parameters has been obtained and these have been further analysed by the use of a SS-LAN computer simulation program. This program can simulate any configuration of the SS-LAN and the results it has produced have been compared with those of the analysis and have been found to be in agreement. A tool for the further analysis of complex SS-LAN configurations has therefore been developed and this will form the basis for further work

Performance of Bit Error Rate and Power Spectral Density of Ultra Wideband with Time Hopping Sequences.

This thesis focuses on several modulation methods for an ultra wideband (UWB) signal. These methods are pulse position modulation (PPM), binary phase shift keying (BPSK), on/off key shifting (OOK), and pulse amplitude modulation (PAM). In addition, time hopping is considered for these modulation schemes, where the capacity per time frame of time hopping PPM is studied using different spreading ratios. This thesis proves that with the addition of time hopping to all types of modulated UWB signals, the performance of power spectral density improves in all aspects, despite the increase of data per time frame. Note that despite the increase of data per frame, the bit error rate remains the same as standard non-time hopping UWB modulated signals

Study Of Code Division Multiple Access (CDMA) Technique For Mobile Communication Systems

This report presents details study of CDMA technique for mobile communication systems. The objective of this project is to understand the spread spectrum techniques including DS-CDMA and also to explain IS-95A system. The test results for simulation on the IS-95A Reverse traffic channel are included to evaluate the performance of the channel under various traffic conditions. Various conditions are applied to the system to decide on the best performance. The performance of the channel was measured in terms of BER. Reasonable Doppler shift frequency is determined. It is found that performance of the system vary with the reduced of data rate. Amount of AWGN added to the signal represents the interference generated by other base station nearer. Therefore changes of SNR in the AWGN Channel provoke the system performance. The detection performance improves with an increase in the SNR

An Assessment of Indoor Geolocation Systems

Currently there is a need to design, develop, and deploy autonomous and portable indoor geolocation systems to fulfil the needs of military, civilian, governmental and commercial customers where GPS and GLONASS signals are not available due to the limitations of both GPS and GLONASS signal structure designs. The goal of this dissertation is (1) to introduce geolocation systems; (2) to classify the state of the art geolocation systems; (3) to identify the issues with the state of the art indoor geolocation systems; and (4) to propose and assess four WPI indoor geolocation systems. It is assessed that the current GPS and GLONASS signal structures are inadequate to overcome two main design concerns; namely, (1) the near-far effect and (2) the multipath effect. We propose four WPI indoor geolocation systems as an alternative solution to near-far and multipath effects. The WPI indoor geolocation systems are (1) a DSSS/CDMA indoor geolocation system, (2) a DSSS/CDMA/FDMA indoor geolocation system, (3) a DSSS/OFDM/CDMA/FDMA indoor geolocation system, and (4) an OFDM/FDMA indoor geolocation system. Each system is researched, discussed, and analyzed based on its principle of operation, its transmitter, the indoor channel, and its receiver design and issues associated with obtaining an observable to achieve indoor navigation. Our assessment of these systems concludes the following. First, a DSSS/CDMA indoor geolocation system is inadequate to neither overcome the near-far effect not mitigate cross-channel interference due to the multipath. Second, a DSSS/CDMA/FDMA indoor geolocation system is a potential candidate for indoor positioning, with data rate up to 3.2 KBPS, pseudorange error, less than to 2 m and phase error less than 5 mm. Third, a DSSS/OFDM/CDMA/FDMA indoor geolocation system is a potential candidate to achieve similar or better navigation accuracy than a DSSS/CDMA indoor geolocation system and data rate up to 5 MBPS. Fourth, an OFDM/FDMA indoor geolocation system is another potential candidate with a totally different signal structure than the pervious three WPI indoor geolocation systems, but with similar pseudorange error performance

Interference suppression and diversity for CDMA systems

In code-division multiple-access (CDMA) systems, due to non-orthogonality of the spreading codes and multipath channels, the desired signal suffers interference from other users. Signal fading due to multipath propagation is another source of impairment in wireless CDMA systems, often severely impacting performance. In this dissertation, reduced-rank minimum mean square error (MMSE) receiver and reduced-rank minimum variance receiver are investigated to suppress interference; transmit diversity is applied to multicarrier CDMA (MC-CDMA) systems to combat fading; packet combing is studied to provide both interference suppression and diversity for CDMA random access systems. The reduced-rank MMSE receiver that uses a reduced-rank estimated covariance matrix is studied to improve the performance of MMSE receiver in CDMA systems. It is shown that the reduced-rank MMSE receiver has much better performance than the full-rank MMSE receiver when the covariance matrix is estimated by using a finite number of data samples and the desired signal is in a low dimensional subspace. It is also demonstrated that the reduced-rank minimum variance receiver outperforms the full-rank minimum variance receiver. The probability density function of the output SNR of the full-rank and reduced-rank linear MMSE estimators is derived for a general linear signal model under the assumption that the signals and noise are Gaussian distributed. Space-time coding that is originally proposed for narrow band systems is applied to an MC-CDMA system in order to get transmit diversity for such a wideband system. Some techniques to jointly decode the space-time code and suppress interference are developed. The channel estimation using either pilot channels or pilot symbols is studied for MC-CDMA systems with space-time coding. Performance of CDMA random access systems with packet combining in fading channels is analyzed. By combining the current retransmitted packet with all its previous transmitted copies, the receiver obtains a diversity gain plus an increased interference and noise suppression gain. Therefore, the bit error rate dramatically decreases with the number of transmissions increasing, which in turn improves the system throughput and reduces the average delay