Efficient resources assignment schemes for clustered multithreaded processors

New feature sizes provide larger number of transistors per chip that architects could use in order to further exploit instruction level parallelism. However, these technologies bring also new challenges that complicate conventional monolithic processor designs. On the one hand, exploiting instruction level parallelism is leading us to diminishing returns and therefore exploiting other sources of parallelism like thread level parallelism is needed in order to keep raising performance with a reasonable hardware complexity. On the other hand, clustering architectures have been widely studied in order to reduce the inherent complexity of current monolithic processors. This paper studies the synergies and trade-offs between two concepts, clustering and simultaneous multithreading (SMT), in order to understand the reasons why conventional SMT resource assignment schemes are not so effective in clustered processors. These trade-offs are used to propose a novel resource assignment scheme that gets and average speed up of 17.6% versus Icount improving fairness in 24%.Peer ReviewedPostprint (published version

A complexity-effective simultaneous multithreading architecture

Different applications may exhibit radically different behaviors and thus have very different requirements in terms of hardware support. In simultaneous multithreading (SMT) architectures, the hardware is shared among multiple running applications in order to better profit from it. However, current architectures are designed for the common case, and try to satisfy a number of different application classes with a single design. That is, current designs are usually overdesigned for most cases, obtaining high performance, but wasting a lot of resources to do so. In this paper we present an alternative SMT architecture, the heterogeneously distributed SMT (hdSMT). Our architecture is based in a novel combination of SMT and clustering techniques in a heterogeneity-aware fashion. The hardware is designed to match the heterogeneous application behavior with the statically and heterogeneously partitioned resources. Such a design is aimed for minimizing the amount of resources wasted to achieve a given performance rate. On top of our statically partitioned architecture, we propose a heuristic policy to map threads to clusters so that each cluster matches the characteristics of the running threads and overall hardware usage is optimized. We compare our hdSMT architecture with a monolithic SMT processor, where all threads compete for the same resources, and with a homogeneous clustered SMT, where resources are statically and equally partitioned across clusters. Our results show that hdSMT architectures obtain an average improvement of 13% and 14% in optimizing performance per area over monolithic SMT and homogeneously clustered SMT respectively.Peer ReviewedPostprint (published version

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Heterogeneity-awareness in multithreaded multicore processors

During the last decades, Computer Architecture has experienced a great series of revolutionary changes. The increasing transistor count on a single chip has led to some of the main milestones in the field, from the release of the first Superscalar (1965) to the state-of-the-art Multithreaded Multicore Architectures, like the Intel Core i7 (2009).Moore's Law has continued for almost half of a century and is not expected to stop for at least another decade, and perhaps much longer. Moore observed a trend in the process technology advances. So, the number of transistors that can be placed inexpensively on an integrated circuit has increased exponentially, doubling approximately every two years. Nevertheless, having more available transistors can not be always directly translated into having more performance.The complexity of state-of-the-art software has reached heights unthinkable in prior ages, both in terms of the amount of computation and the complexity involved. If we deeply analyze this complexity in software we would realize that software is comprised of smaller execution processes that, although maintaining certain spatial/temporal locality, imply an inherently heterogeneous behavior. That is, during execution time the hardware executes very different portions of software, with huge differences in terms of behavior and hardware requirements. This heterogeneity in the behaviour of the software is not specific of the latest videogame, but it is inherent to software programming itself, since the very beginning of Algorithmics.In this PhD dissertation we deeply analyze the inherent heterogeneity present in software behavior. We identify the main issues and sources of this heterogeneity, that hamper most of the state-of-the-art processor designs from obtaining their maximum potential. Hence, the heterogeneity in software turns most of the current processors, commonly called general-purpose processors, into overdesigned. That is, they have much more hardware resources than really needed to execute the software running on them. This fact would not represent a main problem if we were not concerned on the additional power consumption involved in software computation.The final goal of this PhD dissertation consists in assigning each portion of software exactly the amount of hardware resources really needed to fully exploit its maximal potential; without consuming more energy than the strictly needed. That is, obtaining complexity-effective executions using the inherent heterogeneity in software behavior as steering indicator. Thus, we start deeply analyzing the heterogenous behaviour of the software run on top of general-purpose processors and then matching it on top of a heterogeneously distributed hardware, which explicitly exploit heterogeneous hardware requirements. Only by being heterogeneity-aware in software, and appropriately matching this software heterogeneity on top of hardware heterogeneity, may we effectively obtain better processor designs.The PhD dissertation is comprised of four main contributions that cover both multithreaded single-core (hdSMT) and multicore (TCA Algorithm, hTCA Framework and MFLUSH) scenarios, deeply explained in their corresponding chapters in the PhD dissertation memory. Overall, these contributions cover a significant range of the Heterogeneity-Aware Processors' design space. Within this design space, we have focused on the state-of-the-art trend in processor design: Multithreaded Multicore (CMP+SMT) Processors.We make special emphasis on the MPsim simulation tool, specifically designed and developed for this PhD dissertation. This tool has already gone beyond this PhD dissertation, becoming a reference tool by an important group of researchers spread over the Computer Architecture Department (DAC) at the Polytechnic University of Catalonia (UPC), the Barcelona Supercomputing Center (BSC) and the University of Las Palmas de Gran Canaria (ULPGC)