Downlink Achievable Rate Analysis for FDD Massive MIMO Systems

Multiple-Input Multiple-Output (MIMO) systems with large-scale transmit antenna arrays, often called massive MIMO, are a very promising direction for 5G due to their ability to increase capacity and enhance both spectrum and energy efficiency. To get the benefit of massive MIMO systems, accurate downlink channel state information at the transmitter (CSIT) is essential for downlink beamforming and resource allocation. Conventional approaches to obtain CSIT for FDD massive MIMO systems require downlink training and CSI feedback. However, such training will cause a large overhead for massive MIMO systems because of the large dimensionality of the channel matrix. In this dissertation, we improve the performance of FDD massive MIMO networks in terms of downlink training overhead reduction, by designing an efficient downlink beamforming method and developing a new algorithm to estimate the channel state information based on compressive sensing techniques. First, we design an efficient downlink beamforming method based on partial CSI. By exploiting the relationship between uplink direction of arrivals (DoAs) and downlink direction of departures (DoDs), we derive an expression for estimated downlink DoDs, which will be used for downlink beamforming. Second, By exploiting the sparsity structure of downlink channel matrix, we develop an algorithm that selects the best features from the measurement matrix to obtain efficient CSIT acquisition that can reduce the downlink training overhead compared with conventional LS/MMSE estimators. In both cases, we compare the performance of our proposed beamforming method with traditional methods in terms of downlink achievable rate and simulation results show that our proposed method outperform the traditional beamforming methods

Interleaving Channel Estimation and Limited Feedback for Point-to-Point Systems with a Large Number of Transmit Antennas

We introduce and investigate the opportunities of multi-antenna communication schemes whose training and feedback stages are interleaved and mutually interacting. Specifically, unlike the traditional schemes where the transmitter first trains all of its antennas at once and then receives a single feedback message, we consider a scenario where the transmitter instead trains its antennas one by one and receives feedback information immediately after training each one of its antennas. The feedback message may ask the transmitter to train another antenna; or, it may terminate the feedback/training phase and provide the quantized codeword (e.g., a beamforming vector) to be utilized for data transmission. As a specific application, we consider a multiple-input single-output system with $t$ transmit antennas, a short-term power constraint $P$, and target data rate $\rho$. We show that for any $t$, the same outage probability as a system with perfect transmitter and receiver channel state information can be achieved with a feedback rate of $R_1$ bits per channel state and via training $R_2$ transmit antennas on average, where $R_1$ and $R_2$ are independent of $t$, and depend only on $\rho$ and $P$. In addition, we design variable-rate quantizers for channel coefficients to further minimize the feedback rate of our scheme.Comment: To appear in IEEE Transactions on Wireless Communication

Massive MIMO 시스템을 위한 채널 추정 및 피드백 기법

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2017. 2. 이정우.To meet the demand of high throughput in next generation wireless systems, various directions for physical layer evolution are being explored. Massive multiple-input multiple-output (MIMO) systems, characterized by a large number of antennas at the transmitter, are expected to become a key enabler for spectral efficiency improvement. In massive MIMO systems, thanks to the orthogonality between different users' channels, high spectral and energy efficiency can be achieved through simple signal processing techniques. However, to get such advantages, accurate channel state information (CSI) needs to be available, and acquiring CSI in massive MIMO systems is challenging due to the increased channel dimension. In frequency division duplexing (FDD) systems, where CSI at the transmitter is achieved through downlink training and uplink feedback, the overhead for the training and feedback increases proportionally to the number of antennas, and the resource for data transmission becomes scarce in massive MIMO systems. In time division duplexing (TDD) systems, where the channel reciprocity holds and the downlink CSI can be obtained through uplink training, pilot contamination due to correlated pilots becomes a performance bottleneck when the number of antennas increases. In this dissertation, I propose efficient CSI acquisition techniques for various massive MIMO systems. First, I develop a downlink training technique for FDD massive MIMO systems, which estimates the downlink channel with small overhead. To this end, compressed sensing tools are utilized, and the training overhead can be highly reduced by exploiting the previous channel information. Next, a limited feedback scheme is developed for FDD massive MIMO systems. The proposed scheme reduces the feedback overhead using a dimension reduction technique that exploits spatial and temporal correlation of the channel. Lastly, I analyze the effect of pilot contamination, which has been regarded as a performance bottleneck in multi-cell massive MIMO systems, and propose two uplink training strategies. An iterative pilot design scheme is developed for small networks, and a scalable training framework is also proposed for networks with many cells.1 Introduction 1 1.1 Massive MIMO 1 1.2 CSI Acquisition in Massive MIMO Systems 3 1.3 Contributions and Organization 6 1.4 Notations 7 2 Compressed Sensing-Aided Downlink Training 9 2.1 Introduction 10 2.2 System Model 13 2.2.1 Channel Model 13 2.2.2 Downlink Channel Estimation 16 2.3 CS-Aided Channel Training 19 2.3.1 Training Sequence Design 20 2.3.2 Channel Estimation 21 2.3.3 Estimation Error 23 2.4 Discussions 26 2.4.1 Design of Measurement Matrix 26 2.4.2 Extension to MIMO Systems 27 2.4.3 Comparison to CS with Partial Support Information 28 2.5 Simulation Results 29 2.6 Conclusion 37 3 Projection-Based Differential Feedback 39 3.1 Introduction 40 3.2 System Model 44 3.2.1 Multi-User Beamforming with Limited Feedback 45 3.2.2 Massive MIMO Channel 47 3.3 Projection-Based Differential Feedback 48 3.3.1 Projection-Based Differential Feedback Framework 48 3.3.2 Projection for PBDF Framework 51 3.3.3 Efficient Algorithm 57 3.4 Discussions 58 3.4.1 Projection with Imperfect CSIR 58 3.4.2 Acquisition of Channel Statistics 61 3.5 Simulation Results 62 3.6 Conclusion 69 4 Mitigating Pilot Contamination via Pilot Design 71 4.1 Introduction 72 4.2 System Model 73 4.2.1 Multi-cell Massive MIMO Systems 74 4.2.2 Uplink Channel Training 75 4.2.3 Data Transmission 77 4.3 Iterative Pilot Design Algorithm 78 4.3.1 Algorithm 79 4.3.2 Proof of Convergence 81 4.4 Generalized Pilot Reuse 81 4.4.1 Concept of Pilot Reuse Schemes 81 4.4.2 Pilot Design based on Grassmannian Subspace Packing 82 4.5 Simulation Results 85 4.5.1 Iterative Pilot Design 85 4.5.2 Generalized Pilot Reuse 87 4.6 Conclusion 89 5 Conclusion 91 5.1 Summary 91 5.2 Future Directions 93 Bibliography 96 Abstract (In Korean) 109Docto

Sparse Representation for Wireless Communications:A Compressive Sensing Approach

Sparse representation can efficiently model signals in different applications to facilitate processing. In this article, we will discuss various applications of sparse representation in wireless communications, with a focus on the most recent compressive sensing (CS)-enabled approaches. With the help of the sparsity property, CS is able to enhance the spectrum efficiency (SE) and energy efficiency (EE) of fifth-generation (5G) and Internet of Things (IoT) networks