Mapping debris-covered glaciers in the Cordillera Blanca, Peru : an object-based image analysis approach.

Accurate remote-sensing based inventories of glacial ice are often hindered by the presence of supraglacial debris cover. Attempts at automated mapping of debris-covered glacier areas from remotely-sensed multispectral data have met with limited success due to the spectral similarity of supraglacial debris to nearby bedrock, moraines, and fluvial deposition features. Data-fusion approaches leveraging terrain and/or thermal data with multispectral data have yielded improved results in certain geographic regions, but remain unproven in others. This research builds on the data-fusion approaches from the literature and explores the efficacy of object-based image analysis (OBIA) and tree-based machine learning classifiers using Landsat OLI imagery and SRTM elevation data, in effort to map debris-covered glaciers in the Cordillera Blanca range of Peru. Results suggest that the OBIA and machine learning methods render advantages over traditional methods given the unique morphological settings associated with debris-covered glaciers. Accurate inventories of glacial mass and debris-covered glaciers in the Cordillera Blanca are important for understanding the unique water resource, natural hazards, and climate change implications associated with these tropical mountain glaciers

PyrSat - Prevention and response to wild fires with an intelligent Earth observation CubeSat

Forest fires are a pervasive and serious problem. Besides loss of life and extensive environmental damage, fires also result in substantial economic losses, not to mention property damage, injuries, displacements and hardships experienced by the affected citizens. This project proposes a low-cost intelligent hyperspectral 3U CubeSat for the production of fire risk and burnt area maps. It applies Machine Learning algorithms to autonomously process images and obtain final data products on-board the satellite for direct transmission to users on the ground. Used in combination with other services such as EFFIS or AFIS, the system could considerably reduce the extent and consequences of forest fires

Machine intelligence for nerve conduit design and production

Nerve guidance conduits (NGCs) have emerged from recent advances within tissue engineering as a promising alternative to autografts for peripheral nerve repair. NGCs are tubular structures with engineered biomaterials, which guide axonal regeneration from the injured proximal nerve to the distal stump. NGC design can synergistically combine multiple properties to enhance proliferation of stem and neuronal cells, improve nerve migration, attenuate inflammation and reduce scar tissue formation. The aim of most laboratories fabricating NGCs is the development of an automated process that incorporates patient-specific features and complex tissue blueprints (e.g. neurovascular conduit) that serve as the basis for more complicated muscular and skin grafts. One of the major limitations for tissue engineering is lack of guidance for generating tissue blueprints and the absence of streamlined manufacturing processes. With the rapid expansion of machine intelligence, high dimensional image analysis, and computational scaffold design, optimized tissue templates for 3D bioprinting (3DBP) are feasible. In this review, we examine the translational challenges to peripheral nerve regeneration and where machine intelligence can innovate bottlenecks in neural tissue engineering

Consuming Digital Debris in the Plasticene

Claims of customization and control by socio-technical industries are altering the role of consumer and producer. These narratives are often misleading attempts to engage consumers with new forms of technology. By addressing capitalist intent, material, and the reproduction limits of 3-D printed objects’, I observe the aspirational promise of becoming a producer of my own belongings through new networks of production. I am interested in gaining a better understanding of the data consumed that perpetuates hyper-consumptive tendencies for new technological apparatuses. My role as a designer focuses on the resolution of not only the surface of the object through 3-D printing, but the social implications to acknowledge consequential conditions of new forms of consumer technology

Exploring Prognostic and Diagnostic Techniques for Jet Engine Health Monitoring: A Review of Degradation Mechanisms and Advanced Prediction Strategies

Maintenance is crucial for aircraft engines because of the demanding conditions to which they are exposed during operation. A proper maintenance plan is essential for ensuring safe flights and prolonging the life of the engines. It also plays a major role in managing costs for aeronautical companies. Various forms of degradation can affect different engine components. To optimize cost management, modern maintenance plans utilize diagnostic and prognostic techniques, such as Engine Health Monitoring (EHM), which assesses the health of the engine based on monitored parameters. In recent years, various EHM systems have been developed utilizing computational techniques. These algorithms are often enhanced by utilizing data reduction and noise filtering tools, which help to minimize computational time and efforts, and to improve performance by reducing noise from sensor data. This paper discusses the various mechanisms that lead to the degradation of aircraft engine components and the impact on engine performance. Additionally, it provides an overview of the most commonly used data reduction and diagnostic and prognostic techniques

Spatial prediction of landslide susceptibility/intensity through advanced statistical approaches implementation: applications to the Cinque Terre (Eastern Liguria, Italy)

Landslides are frequently responsible for considerable huge economic losses and casualties in mountainous regions especially nowadays as development expands into unstable hillslope areas under the pressures of increasing population size and urbanization (Di Martire et al. 2012). People are not the only vulnerable targets of landslides. Indeed, mass movements can easily lay waste to everything in their path, threatening human properties, infrastructures and natural environments. Italy is severely affected by landslide phenomena and it is one of the most European countries affected by this kind of phenomena. In this framework, Italy is particularly concerned with forecasting landslide effects (Calcaterra et al. 2003b), in compliance with the National Law n. 267/98, enforced after the devastating landslide event of Sarno (Campania, Southern Italy). According to the latest Superior Institute for the Environmental Protection and Research (ISPRA, 2018) report on "hydrogeological instability" of 2018, it emerges that the population exposed to landslides risk is more than 5 million and in particular almost half-million falls into very high hazard zones. The slope stability can be compromised by both natural and human-caused changes in the environment. The main reasons can be summarised into heavy rainfalls, earthquakes, rapid snow-melts, slope cut due to erosions, and variation in groundwater levels for the natural cases whilst slopes steepening through construction, quarrying, building of houses, and farming along the foot of mountainous zone correspond to the human component. This Ph.D. thesis was carried out in the Liguria region, inside the Cinque Terre National Park. This area was chosen due to its abundance of different types of landslides and its geological, geomorphological and urban characteristics. The Cinque Terre area can be considered as one of the most representative examples of human-modified landscape. Starting from the early centuries of the Middle Ages, local farmers have almost completely modified the original slope topography through the construction of dry-stone walls, creating an outstanding terraced coastal landscape (Terranova 1984, 1989; Terranova et al. 2006; Brandolini 2017). This territory is extremely dynamic since it is characterized by a complex geological and geomorphological setting, where many surficial geomorphic processes coexist, along with peculiar weather conditions (Cevasco et al. 2015). For this reason, part of this research focused on analyzing the disaster that hit the Cinque Terre on October, 25th, 2011. Multiple landslides took place in this occasion, triggering almost simultaneously hundreds of shallow landslides in the time-lapse of 5-6 hours, causing 13 victims, and severe structural and economic damage (Cevasco et al. 2012; D\u2019Amato Avanzi et al. 2013). Moreover, this artificial landscape experienced important land-use changes over the last century (Cevasco et al. 2014; Brandolini 2017), mostly related to the abandonment of agricultural activity. It is known that terraced landscapes, when no longer properly maintained, become more prone to erosion processes and mass movements (Lesschen et al. 2008; Brandolini et al. 2018a; Moreno-de-las-Heras et al. 2019; Seeger et al. 2019). Within the context of slope instability, the international community has been focusing for the last decade on recognising the landslide susceptibility/hazard of a given area of interest. Landslide susceptibility predicts "where" landslides are likely to occur, whereas, landslide hazard evaluates future spatial and temporal mass movement occurrence (Guzzetti et al., 1999). Although both definitions are incorrectly used as interchangeable. Such a recognition phase becomes crucial for land use planning activities aimed at the protection of people and infrastructures. In fact, only with proper risk assessment governments, regional institutions, and municipalities can prepare the appropriate countermeasures at different scales. Thus, landslide susceptibility is the keystone of a long chain of procedures that are actively implemented to manage landslide risk at all levels, especially in vulnerable areas such as Liguria. The methods implemented in this dissertation have the overall objective of evaluating advanced algorithms for modeling landslide susceptibility. The thesis has been structured in six chapters. The first chapter introduces and motivates the work conducted in the three years of the project by including information about the research objectives. The second chapter gives the basic concepts related to landslides, definition, classification and causes, landslide inventory, along with the derived products: susceptibility, hazard and risk zoning, with particular attention to the evaluation of landslide susceptibility. The objective of the third chapter is to define the different methodologies, algorithms and procedures applied during the research activity. The fourth chapter deals with the geographical, geological and geomorphological features of the study area. The fifth chapter provides information about the results of the applied methodologies to the study area: Machine Learning algorithms, runout method and Bayesian approach. Furthermore, critical discussions on the outcomes obtained are also described. The sixth chapter deals with the discussions and the conclusions of this research, critically analysing the role of such work in the general panorama of the scientific community and illustrating the possible future perspectives

An Approach to Self-Supervised Object Localisation through Deep Learning Based Classification

Deep learning has become ubiquitous in science and industry for classifying images or identifying patterns in data. The most widely used approach to training convolutional neural networks is supervised learning, which requires a large set of annotated data. To elude the high cost of collecting and annotating datasets, selfsupervised learning methods represent a promising way to learn the common functions of images and videos from large-scale unlabeled data without using humanannotated labels. This thesis provides the results of using self-supervised learning and explainable AI to localise objects in images from electron microscopes. The work used a synthetic geometric dataset and a synthetic pollen dataset. The classification was used as a pretext task. Different methods of explainable AI were applied: Grad-CAM and backpropagation-based approaches showed the lack of prospects; at the same time, the Extremal Perturbation function has shown efficiency. As a result of the downstream localisation task, the objects of interest were detected with competitive accuracy for one-class images. The advantages and limitations of the approach have been analysed. Directions for further work are proposed