Soft computing techniques for video de-interlacing

This paper presents the application of soft computing techniques to video processing. Specially, the research work has been focused on de-interlacing task. It is necessary whenever the transmission standard uses an interlaced format but the receiver requires a progressive scanning, as happens in consumer displays such as LCDs and plasma. A simple hierarchical solution that combines three simple fuzzy logicbased constituents (interpolators) is presented in this paper. Each interpolator specialized in one of three key image features for de-interlacing: motion, edges, and possible repetition of picture areas. The resulting algorithm offers better results than others with less or similar computational cost. A very interesting result is that our algorithm is competitive with motion-compensated algorithm

Design of a digital compression technique for shuttle television

The determination of the performance and hardware complexity of data compression algorithms applicable to color television signals, were studied to assess the feasibility of digital compression techniques for shuttle communications applications. For return link communications, it is shown that a nonadaptive two dimensional DPCM technique compresses the bandwidth of field-sequential color TV to about 13 MBPS and requires less than 60 watts of secondary power. For forward link communications, a facsimile coding technique is recommended which provides high resolution slow scan television on a 144 KBPS channel. The onboard decoder requires about 19 watts of secondary power

Hybridní tkané struktury

Tato disertační práce poskytuje podrobnější informace o vlastnostech čedičových vláken vedle běžně používaných vláken, a to pro návrh a vývoj hybridních tkaných textilií určených pro výrobu kompozitních materiálů, zejména betonu vyztuženého textilií (TRC). Zkoumány jsou různé kombinace čedičové hybridní tkaniny s ohledem na mechanické, tepelné, akustické, elektrické a jiné vlastnosti, přičemž vliv hybridizace a struktury tkaných textilií je studován detailněji. Mechanické vlastnosti jsou predikovány s použitím a strukturální modely korelovány s výsledky získanými z provedených experimentů. Čedičová vlákna jsou velmi perspektivním materiálem díky jejich ohnivzdornosti spojené s lávovým původem, vynikajícím mechanickým vlastnostem a relativně nízké ceně. Na druhou stranu, tato vlákna doposud nebyla podrobena rozsáhlejšímu průzkumu, protože je možno je považovat za relativně nový typ vlákna. V technických článcích je možno nalézt jen omezené množství údajů o jejich chování po zpracování, jež je spojeno se stárnutím materiálu. Disertační práce prozkoumává možnosti využití čedičových vláken v kombinaci s jinými typy přízí a následně také vliv hybridní tkané struktury na nosnost kompozitu a dobu jeho životnosti. V této studii je vyšetřeno nosné chování TRC kompozitu (kompozitní systém tvořený jemnozrnnou betonovou matricí a výztuží složenou z vysoce funkčních vláken zpracovaných do plošné textilie) při jednoosém namáhání tahem. Průzkum je zaměřen na výztužnou schopnost hybridní tkané struktury. Při začleňování textilní struktury do betonu je zřejmé, že veškeré příze nejsou impregnovány cementovou matricí kompletně, což vede k heterogenitě systému beton - příze přispívajícímu ke komplexní nosnosti a defektnímu chování TRC kompozitu. Hlavním cílem této práce je tedy průzkum hybridizačních efektů na nosné chování TRC kompozitu.This thesis conveys a better insight into characteristics of Basalt fibers specifically, alongside commonly used fibers to design and develop hybrid woven fabrics for TRC composite materials. Various combinations of basalt hybrid fabrics are investigated with respect to mechanical, thermal, acoustic, electrical and other functional properties. The influence of hybridization and structure of woven fabric is studied in detail. The tensile properties are predicted by using structural model and correlated to the results obtained through experiments. Basalt fibers are very promising materials due to their fire resistance related to magmatic origin, superior mechanical properties and relatively low cost. On the other hand, being a relatively new kind of fiber, they are still not studied extensively. There are very few indications in technical papers about their behavior after aging treatments. The current study investigates the possibility of using basalt with other types of yarns and consequently the effect of hybrid woven structure on load bearing capacity and durability. In the present work, the load-bearing behavior of Textile Reinforced Concrete (TRC), which is a composite of a fine-grained concrete matrix and a reinforcement of high-performance fibers processed to textiles, when exposed to uniaxial tensile loading was investigated. The investigations are focused on reinforcement of hybrid woven fabrics. When textile yarns are embedded in concrete, they are not entirely impregnated with cementitious matrix, which leads to associated heterogeneity of the concrete and the yarns to a complex load-bearing and failure behavior of the composite system. The main objective of the work is the investigation of hybridization effects in the load-bearing behavior of TRC

Advanced manufacturing technology for 3D profiled woven preforms

3D textile performs offer a high potential to increase mechanical properties of composites and they can reduce the production steps and costs as well. The variety of woven structures is enormous. The algorithms based on the conventional weaving notation can only represent the possible woven structures in a limited way. Within the scope of this dissertation, a new weaving notation was developed in order to analyze the multilayer woven structures analytically. Technological solutions were developed in order to guarantee a reproducible preform production with commingled hybrid yarns. Terry weaving technique can be utilized to create vertical connections on carrier fabrics, which makes it suitable for the development of complex profiles. A double rapier weaving machine was modified with electronically controlled terry weaving and pneumatic warp yarn pull-back systems. Various spacer fabrics and 3D profiles were developed. A linear take-up system is developed to assure reproducible preform production with a minimum material damage. Integrated cutting and laying mechanisms on the take-up system provides a high level of automation