Exploiting partial reconfiguration through PCIe for a microphone array network emulator

The current Microelectromechanical Systems (MEMS) technology enables the deployment of relatively low-cost wireless sensor networks composed of MEMS microphone arrays for accurate sound source localization. However, the evaluation and the selection of the most accurate and power-efficient network’s topology are not trivial when considering dynamic MEMS microphone arrays. Although software simulators are usually considered, they consist of high-computational intensive tasks, which require hours to days to be completed. In this paper, we present an FPGA-based platform to emulate a network of microphone arrays. Our platform provides a controlled simulated acoustic environment, able to evaluate the impact of different network configurations such as the number of microphones per array, the network’s topology, or the used detection method. Data fusion techniques, combining the data collected by each node, are used in this platform. The platform is designed to exploit the FPGA’s partial reconfiguration feature to increase the flexibility of the network emulator as well as to increase performance thanks to the use of the PCI-express high-bandwidth interface. On the one hand, the network emulator presents a higher flexibility by partially reconfiguring the nodes’ architecture in runtime. On the other hand, a set of strategies and heuristics to properly use partial reconfiguration allows the acceleration of the emulation by exploiting the execution parallelism. Several experiments are presented to demonstrate some of the capabilities of our platform and the benefits of using partial reconfiguration

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Increasing Flexibility of FPGA-based CNN Accelerators with Dynamic Partial Reconfiguration

Convolutional Neural Networks (CNN) are widely used for image classification and have achieved significantly accurate performance in the last decade. However, they require computationally intensive operations for embedded applications. In recent years, FPGA-based CNN accelerators have been proposed to improve energy efficiency and throughput. While dynamic partial reconfiguration (DPR) is increasingly used in CNN accelerators, the performance of dynamically reconfigurable accelerators is usually lower than the performance of pure static FPGA designs. This work presents a dynamically reconfigurable CNN accelerator architecture that does not sacrifice throughput performance or classification accuracy. The proposed accelerator is composed of reconfigurable macroblocks and dynamically utilizes the device resources according to model parameters. Moreover, we devise a novel approach, to the best of our knowledge, to hide the computations of the pooling layers inside the convolutional layers, thereby further improving throughput. Using the proposed architecture and DPR, different CNN architectures can be realized on the same FPGA with optimized throughput and accuracy. The proposed architecture is evaluated by implementing two different LeNet CNN models trained by different datasets and classifying different classes. Experimental results show that the implemented design achieves higher throughput than current LeNet FPGA accelerators

Accelerating Training of Deep Neural Networks via Sparse Edge Processing

We propose a reconfigurable hardware architecture for deep neural networks (DNNs) capable of online training and inference, which uses algorithmically pre-determined, structured sparsity to significantly lower memory and computational requirements. This novel architecture introduces the notion of edge-processing to provide flexibility and combines junction pipelining and operational parallelization to speed up training. The overall effect is to reduce network complexity by factors up to 30x and training time by up to 35x relative to GPUs, while maintaining high fidelity of inference results. This has the potential to enable extensive parameter searches and development of the largely unexplored theoretical foundation of DNNs. The architecture automatically adapts itself to different network sizes given available hardware resources. As proof of concept, we show results obtained for different bit widths.Comment: Presented at the 26th International Conference on Artificial Neural Networks (ICANN) 2017 in Alghero, Ital

Modular Self-Reconfigurable Robot Systems

The field of modular self-reconfigurable robotic systems addresses the design, fabrication, motion planning, and control of autonomous kinematic machines with variable morphology. Modular self-reconfigurable systems have the promise of making significant technological advances to the field of robotics in general. Their promise of high versatility, high value, and high robustness may lead to a radical change in automation. Currently, a number of researchers have been addressing many of the challenges. While some progress has been made, it is clear that many challenges still exist. By illustrating several of the outstanding issues as grand challenges that have been collaboratively written by a large number of researchers in this field, this article has shown several of the key directions for the future of this growing fiel

A dynamic reconfigurable architecture for hybrid spiking and convolutional FPGA-based neural network designs

This work presents a dynamically reconfigurable architecture for Neural Network (NN) accelerators implemented in Field-Programmable Gate Array (FPGA) that can be applied in a variety of application scenarios. Although the concept of Dynamic Partial Reconfiguration (DPR) is increasingly used in NN accelerators, the throughput is usually lower than pure static designs. This work presents a dynamically reconfigurable energy-efficient accelerator architecture that does not sacrifice throughput performance. The proposed accelerator comprises reconfigurable processing engines and dynamically utilizes the device resources according to model parameters. Using the proposed architecture with DPR, different NN types and architectures can be realized on the same FPGA. Moreover, the proposed architecture maximizes throughput performance with design optimizations while considering the available resources on the hardware platform. We evaluate our design with different NN architectures for two different tasks. The first task is the image classification of two distinct datasets, and this requires switching between Convolutional Neural Network (CNN) architectures having different layer structures. The second task requires switching between NN architectures, namely a CNN architecture with high accuracy and throughput and a hybrid architecture that combines convolutional layers and an optimized Spiking Neural Network (SNN) architecture. We demonstrate throughput results from quickly reprogramming only a tiny part of the FPGA hardware using DPR. Experimental results show that the implemented designs achieve a 7× faster frame rate than current FPGA accelerators while being extremely flexible and using comparable resources