6,725 research outputs found
Space Time MUSIC: Consistent Signal Subspace Estimation for Wide-band Sensor Arrays
Wide-band Direction of Arrival (DOA) estimation with sensor arrays is an
essential task in sonar, radar, acoustics, biomedical and multimedia
applications. Many state of the art wide-band DOA estimators coherently process
frequency binned array outputs by approximate Maximum Likelihood, Weighted
Subspace Fitting or focusing techniques. This paper shows that bin signals
obtained by filter-bank approaches do not obey the finite rank narrow-band
array model, because spectral leakage and the change of the array response with
frequency within the bin create \emph{ghost sources} dependent on the
particular realization of the source process. Therefore, existing DOA
estimators based on binning cannot claim consistency even with the perfect
knowledge of the array response. In this work, a more realistic array model
with a finite length of the sensor impulse responses is assumed, which still
has finite rank under a space-time formulation. It is shown that signal
subspaces at arbitrary frequencies can be consistently recovered under mild
conditions by applying MUSIC-type (ST-MUSIC) estimators to the dominant
eigenvectors of the wide-band space-time sensor cross-correlation matrix. A
novel Maximum Likelihood based ST-MUSIC subspace estimate is developed in order
to recover consistency. The number of sources active at each frequency are
estimated by Information Theoretic Criteria. The sample ST-MUSIC subspaces can
be fed to any subspace fitting DOA estimator at single or multiple frequencies.
Simulations confirm that the new technique clearly outperforms binning
approaches at sufficiently high signal to noise ratio, when model mismatches
exceed the noise floor.Comment: 15 pages, 10 figures. Accepted in a revised form by the IEEE Trans.
on Signal Processing on 12 February 1918. @IEEE201
Adaptive beamforming using frequency invariant uniform concentric circular arrays
This paper proposes new adaptive beamforming algorithms for a class of uniform concentric circular arrays (UCCAs) having near-frequency invariant characteristics. The basic principle of the UCCA frequency invariant beamformer (FIB) is to transform the received signals to the phase mode representation and remove the frequency dependence of individual phase modes through the use of a digital beamforming or compensation network. As a result, the far field pattern of the array is electronic steerable and is approximately invariant over a wider range of frequencies than the uniform circular arrays (UCAs). The beampattern is governed by a small set of variable beamformer weights. Based on the minimum variance distortionless response (MVDR) and generalized sidelobe canceller (GSC) methods, new recursive adaptive beamforming algorithms for UCCA-FIB are proposed. In addition, robust versions of these adaptive beamforming algorithms for mitigating direction-of-arrival (DOA) and sensor position errors are developed. Simulation results show that the proposed adaptive UCCA-FIBs converge much faster and reach a considerable lower steady-state error than conventional broadband UCCA beamformers without using the compensation network. Since fewer variable multipliers are required in the proposed algorithms, it also leads to lower arithmetic complexity and faster tracking performance than conventional methods. © 2007 IEEE.published_or_final_versio
UTHM water quality classification based on sub index
River or stream at their source is unpolluted, but as water flow downstream, the river or lake is receiving point and non-point pollutant source. Ammoniacal nitrogen (NH3- N) and suspended solids (SS) strongly influences the dynamics of the dissolved oxygen in the water. Studies on monitoring this parameter were conducted for a river or lake but limited to the small man-made lake. This study is initiate to determine the changes in water quality of UTHM watershed as the water flows from upstream to downstream. The monitoring of NH3-N and TSS were monitored at two sampling schemes, 1) at the two-week interval and, 2) at a daily basis followed by the determination of the water quality sub-index particularly SIAN and SISS. The results showed that the two lakes in UTHM watershed were classified as polluted. In conclusion, the remedial action should be implemented to improve the water quality to meet the requirements at least to meet the recreational purpose
SoundCompass: a distributed MEMS microphone array-based sensor for sound source localization
Sound source localization is a well-researched subject with applications ranging from localizing sniper fire in urban battlefields to cataloging wildlife in rural areas. One critical application is the localization of noise pollution sources in urban environments, due to an increasing body of evidence linking noise pollution to adverse effects on human health. Current noise mapping techniques often fail to accurately identify noise pollution sources, because they rely on the interpolation of a limited number of scattered sound sensors. Aiming to produce accurate noise pollution maps, we developed the SoundCompass, a low-cost sound sensor capable of measuring local noise levels and sound field directionality. Our first prototype is composed of a sensor array of 52 Microelectromechanical systems (MEMS) microphones, an inertial measuring unit and a low-power field-programmable gate array (FPGA). This article presents the SoundCompass's hardware and firmware design together with a data fusion technique that exploits the sensing capabilities of the SoundCompass in a wireless sensor network to localize noise pollution sources. Live tests produced a sound source localization accuracy of a few centimeters in a 25-m2 anechoic chamber, while simulation results accurately located up to five broadband sound sources in a 10,000-m2 open field
Adaptive beamforming using uniform concentric circular arrays with frequency invariant characteristics
This paper proposes a new method for adaptive beamforming using uniform concentric circular array (UCCA) that has nearly frequency invariant (FI) characteristics. The basic principle of FI UCCA is to transform the received signals to the phase mode and compensate for the frequency dependency of the individual phase mode through the use of a digital beamforming network. The far field pattern of the array is then determined by a set of weights and it is approximately invariant over a wide range of frequencies. Therefore, the minimum variance beamforming (MVB) approach can be used to adapt the small set of weights, as if it is a narrowband array, Design examples and simulation are given to demonstrate the usefulness of the proposed FI UCCA in broadband DOA estimation and beamforming. © 2005 IEEE.published_or_final_versio
- …