2020 NASA Technology Taxonomy

This document is an update (new photos used) of the PDF version of the 2020 NASA Technology Taxonomy that will be available to download on the OCT Public Website. The updated 2020 NASA Technology Taxonomy, or "technology dictionary", uses a technology discipline based approach that realigns like-technologies independent of their application within the NASA mission portfolio. This tool is meant to serve as a common technology discipline-based communication tool across the agency and with its partners in other government agencies, academia, industry, and across the world

NASA Automated Rendezvous and Capture Review. A compilation of the abstracts

This document presents a compilation of abstracts of papers solicited for presentation at the NASA Automated Rendezvous and Capture Review held in Williamsburg, VA on November 19-21, 1991. Due to limitations on time and other considerations, not all abstracts could be presented during the review. The organizing committee determined however, that all abstracts merited availability to all participants and represented data and information reflecting state-of-the-art of this technology which should be captured in one document for future use and reference. The organizing committee appreciates the interest shown in the review and the response by the authors in submitting these abstracts

Autonomous Systems, Robotics, and Computing Systems Capability Roadmap: NRC Dialogue

Contents include the following: Introduction. Process, Mission Drivers, Deliverables, and Interfaces. Autonomy. Crew-Centered and Remote Operations. Integrated Systems Health Management. Autonomous Vehicle Control. Autonomous Process Control. Robotics. Robotics for Solar System Exploration. Robotics for Lunar and Planetary Habitation. Robotics for In-Space Operations. Computing Systems. Conclusion

Ground Vehicle Platooning Control and Sensing in an Adversarial Environment

The highways of the world are growing more congested. People are inherently bad drivers from a safety and system reliability perspective. Self-driving cars are one solution to this problem, as automation can remove human error and react consistently to unexpected events. Automated vehicles have been touted as a potential solution to improving highway utilization and increasing the safety of people on the roads. Automated vehicles have proven to be capable of interacting safely with human drivers, but the technology is still new. This means that there are points of failure that have not been discovered yet. The focus of this work is to provide a platform to evaluate the security and reliability of automated ground vehicles in an adversarial environment. An existing system was already in place, but it was limited to longitudinal control, relying on a steel cable to keep the vehicle on track. The upgraded platform was developed with computer vision to drive the vehicle around a track in order to facilitate an extended attack. Sensing and control methods for the platform are proposed to provide a baseline for the experimental platform. Vehicle control depends on extensive sensor systems to determine the vehicle position relative to its surroundings. A potential attack on a vehicle could be performed by jamming the sensors necessary to reliably control the vehicle. A method to extend the sensing utility of a camera is proposed as a countermeasure against a sensor jamming attack. A monocular camera can be used to determine the bearing to a target, and this work extends the sensor capabilities to estimate the distance to the target. This provides a redundant sensor if the standard distance sensor of a vehicle is compromised by a malicious agent. For a 320×200 pixel camera, the distance estimation is accurate between 0.5 and 3 m. One previously discovered vulnerability of automated highway systems is that vehicles can coordinate an attack to induce traffic jams and collisions. The effects of this attack on a vehicle system with mixed human and automated vehicles are analyzed. The insertion of human drivers into the system stabilizes the traffic jam at the cost of highway utilization

Ground Vehicle Platooning Control and Sensing in an Adversarial Environment

The highways of the world are growing more congested. People are inherently bad drivers from a safety and system reliability perspective. Self-driving cars are one solution to this problem, as automation can remove human error and react consistently to unexpected events. Automated vehicles have been touted as a potential solution to improving highway utilization and increasing the safety of people on the roads. Automated vehicles have proven to be capable of interacting safely with human drivers, but the technology is still new. This means that there are points of failure that have not been discovered yet. The focus of this work is to provide a platform to evaluate the security and reliability of automated ground vehicles in an adversarial environment. An existing system was already in place, but it was limited to longitudinal control, relying on a steel cable to keep the vehicle on track. The upgraded platform was developed with computer vision to drive the vehicle around a track in order to facilitate an extended attack. Sensing and control methods for the platform are proposed to provide a baseline for the experimental platform. Vehicle control depends on extensive sensor systems to determine the vehicle position relative to its surroundings. A potential attack on a vehicle could be performed by jamming the sensors necessary to reliably control the vehicle. A method to extend the sensing utility of a camera is proposed as a countermeasure against a sensor jamming attack. A monocular camera can be used to determine the bearing to a target, and this work extends the sensor capabilities to estimate the distance to the target. This provides a redundant sensor if the standard distance sensor of a vehicle is compromised by a malicious agent. For a 320×200 pixel camera, the distance estimation is accurate between 0.5 and 3 m. One previously discovered vulnerability of automated highway systems is that vehicles can coordinate an attack to induce traffic jams and collisions. The effects of this attack on a vehicle system with mixed human and automated vehicles are analyzed. The insertion of human drivers into the system stabilizes the traffic jam at the cost of highway utilization

Adaptive Phototransistor Sensor for Line Finding

AbstractLine finding is used by wheeled mobile robot for localization. A phototransistor array was designed to detect the line position relative to the robot. This sensor is composed of six phototransistors to detect the position of line on the floor relative to the wheeled mobile robot. Because the ambience may change with time and the floor colour may be different from one location to another, an adaptive scheme has been designed to find the line on the floor. This proposed scheme consists of three parts; modulation and demodulation, threshold recognition with k-means clustering, and line finding with fuzzy logic. Modulation and demodulation technique is used to tackle the problem of different ambience in the surrounding. K-means clustering is used to recognize the contrast in the colour of line and floor while fuzzy logic is used to find the line relative to the sensor. Experiments were conducted in a microcontroller and it was found out that this scheme can find the line on the floor with minimum error

SLAM research for port AGV based on 2D LIDAR

With the increase in international trade, the transshipment of goods at international container ports is very busy. The AGV (Automated Guided Vehicle) has been used as a new generation of automated container horizontal transport equipment. The AGV is an automated unmanned vehicle that can work 24 hours a day, increasing productivity and reducing labor costs compared to using container trucks. The ability to obtain information about the surrounding environment is a prerequisite for the AGV to automatically complete tasks in the port area. At present, the method of AGV based on RFID tag positioning and navigation has a problem of excessive cost. This dissertation has carried out a research on applying light detection and ranging (LIDAR) simultaneous localization and mapping (SLAM) technology to port AGV. In this master's thesis, a mobile test platform based on a laser range finder is developed to scan 360-degree environmental information (distance and angle) centered on the LIDAR and upload the information to a real-time database to generate surrounding environmental maps, and the obstacle avoidance strategy was developed based on the acquired information. The effectiveness of the platform was verified by the experiments from multiple scenarios. Then based on the first platform, another experimental platform with encoder and IMU sensor was developed. In this platform, the functionality of SLAM is enabled by the GMapping algorithm and the installation of the encoder and IMU sensor. Based on the established environment SLAM map, the path planning and obstacle avoidance functions of the platform were realized.Com o aumento do comércio internacional, o transbordo de mercadorias em portos internacionais de contentores é muito movimentado. O AGV (“Automated Guided Vehicle”) foi usado como uma nova geração de equipamentos para transporte horizontal de contentores de forma automatizada. O AGV é um veículo não tripulado automatizado que pode funcionar 24 horas por dia, aumentando a produtividade e reduzindo os custos de mão-de-obra em comparação com o uso de camiões porta-contentores. A capacidade de obter informações sobre o ambiente circundante é um pré-requisito para o AGV concluir automaticamente tarefas na área portuária. Atualmente, o método de AGV baseado no posicionamento e navegação de etiquetas RFID apresenta um problema de custo excessivo. Nesta dissertação foi realizada uma pesquisa sobre a aplicação da tecnologia LIDAR de localização e mapeamento simultâneo (SLAM) num AGV. Uma plataforma de teste móvel baseada num telémetro a laser é desenvolvida para examinar o ambiente em redor em 360 graus (distância e ângulo), centrado no LIDAR, e fazer upload da informação para uma base de dados em tempo real para gerar um mapa do ambiente em redor. Uma estratégia de prevenção de obstáculos foi também desenvolvida com base nas informações adquiridas. A eficácia da plataforma foi verificada através da realização de testes com vários cenários e obstáculos. Por fim, com base na primeira plataforma, uma outra plataforma experimental com codificador e sensor IMU foi também desenvolvida. Nesta plataforma, a funcionalidade do SLAM é ativada pelo algoritmo GMapping e pela instalação do codificador e do sensor IMU. Com base no estabelecimento do ambiente circundante SLAM, foram realizadas as funções de planeamento de trajetória e prevenção de obstáculos pela plataforma