Analog Computing using 1T1R Crossbar Arrays

Memristor is a novel passive electronic device and a promising candidate for new generation non-volatile memory and analog computing. Analog computing based on memristors has been explored in this study. Due to the lack of commercial electrical testing instruments for those emerging devices and crossbar arrays, we have designed and built testing circuits to implement analog and parallel computing operations. With the setup developed in this study, we have successfully demonstrated image processing functions utilizing large memristor crossbar arrays. We further designed and experimentally demonstrated the first memristor based field programmable analog array (FPAA), which was successfully configured for audio equalizer and frequency classifier demonstration as exemplary applications of such memristive FPAA (memFPAA)

Crossbar-based memristive logic-in-memory architecture

The use of memristors and resistive random access memory (ReRAM) technology to perform logic computations, has drawn considerable attention from researchers in recent years. However, the topological aspects of the underlying ReRAM architecture and its organization have received less attention, as the focus has mainly been on device-specific properties for functionally complete logic gates through conditional switching in ReRAM circuits. A careful investigation and optimization of the target geometry is thus highly desirable for the implementation of logic-in-memory architectures. In this paper, we propose a crossbar-based in-memory parallel processing system in which, through the heterogeneity of the resistive cross-point devices, we achieve local information processing in a state-of-the-art ReRAM crossbar architecture with vertical group-accessed transistors as cross-point selector devices. We primarily focus on the array organization, information storage, and processing flow, while proposing a novel geometry for the cross-point selection lines to mitigate current sneak-paths during an arbitrary number of possible parallel logic computations. We prove the proper functioning and potential capabilities of the proposed architecture through SPICE-level circuit simulations of half-adder and sum-of-products logic functions. We compare certain features of the proposed logic-in-memory approach with another work of the literature, and present an analysis of circuit resources, integration density, and logic computation parallelism.Peer ReviewedPostprint (author's final draft

Non-volatile heterogeneous III-V/Si photonics via optical charge-trap memory

We demonstrate, for the first time, non-volatile charge-trap flash memory (CTM) co-located with heterogeneous III-V/Si photonics. The wafer-bonded III-V/Si CTM cell facilitates non-volatile optical functionality for a variety of devices such as Mach-Zehnder Interferometers (MZIs), asymmetric MZI lattice filters, and ring resonator filters. The MZI CTM exhibits full write/erase operation (100 cycles with 500 states) with wavelength shifts of $\Delta\lambda_{non-volatile} = 1.16 nm$ ($\Delta n_{eff,non-volatile} ~ 2.5 \times 10^{-4}$) and a dynamic power consumption $<$ 20 pW (limited by measurement). Multi-bit write operation (2 bits) is also demonstrated and verified over a time duration of 24 hours and most likely beyond. The cascaded 2nd order ring resonator CTM filter exhibited an improved ER of ~ 7.11 dB compared to the MZI and wavelength shifts of $\Delta\lambda_{non-volatile} = 0.041 nm$ ($\Delta n_{eff, non-volatile} = 1.5 \times 10^{-4}$) with similar pW-level dynamic power consumption as the MZI CTM. The ability to co-locate photonic computing elements and non-volatile memory provides an attractive path towards eliminating the von-Neumann bottleneck

In-Memory Computing by Using Nano-ionic Memristive Devices

By reaching to the CMOS scaling limitation based on the Moore’s law and due to the increasing disparity between the processing units and memory performance, the quest is continued to find a suitable alternative to replace the conventional technology. The recently discovered two terminal element, memristor, is believed to be one of the most promising candidates for future very large scale integrated systems. This thesis is comprised of two main parts, (Part I) modeling the memristor devices, and (Part II) memristive computing. The first part is presented in one chapter and the second part of the thesis contains five chapters. The basics and fundamentals regarding the memristor functionality and memristive computing are presented in the introduction chapter. A brief detail of these two main parts is as follows: Part I: Modeling- This part presents an accurate model based on the charge transport mechanisms for nanoionic memristor devices. The main current mechanism in metal/insulator/metal (MIM) structures are assessed, a physic-based model is proposed and a SPICE model is presented and tested for four different fabricated devices. An accuracy comparison is done for various models for Ag/TiO2/ITO fabricated device. Also, the functionality of the model is tested for various input signals. Part II: Memristive computing- Memristive computing is about utilizing memristor to perform computational tasks. This part of the thesis is divided into neuromorphic, analog and digital computing schemes with memristor devices. – Neuromorphic computing- Two chapters of this thesis are about biologicalinspired memristive neural networks using STDP-based learning mechanism. The memristive implementation of two well-known spiking neuron models, Hudgkin-Huxley and Morris-Lecar, are assessed and utilized in the proposed memristive network. The synaptic connections are also memristor devices in this design. Unsupervised pattern classification tasks are done to ensure the right functionality of the system. – Analog computing- Memristor has analog memory property as it can be programmed to different memristance values. A novel memristive analog adder is designed by Continuous Valued Number System (CVNS) scheme and its circuit is comprised of addition and modulo blocks. The proposed analog adder design is explained and its functionality is tested for various numbers. It is shown that the CVNS scheme is compatible with memristive design and the environment resolution can be adjusted by the memristance ratio of the memristor devices. – Digital computing- Two chapters are dedicated for digital computing. In the first one, a development over IMPLY-based logic with memristor is provided to implement a 4:2 compressor circuit. In the second chapter, A novel resistive over a novel mirrored memristive crossbar platform. Different logic gates are designed with the proposed memristive logic method and the simulations are provided with Cadence to prove the functionality of the logic. The logic implementation over a mirrored memristive crossbars is also assessed