Self-Consistent C-V Characterization of Depletion Mode Buried Channel InGaAs/InAs Quantum Well FET Incorporating Strain Effects

We investigated Capacitance-Voltage (C-V) characteristics of the Depletion Mode Buried Channel InGaAs/InAs Quantum Well FET by using Self-Consistent method incorporating Quantum Mechanical (QM) effects. Though the experimental results of C-V for enhancement type device is available in recent literature, a complete characterization of electrostatic property of depletion type Buried Channel Quantum Well FET (QWFET) structure is yet to be done. C-V characteristics of the device is studied with the variation of three important process parameters: Indium (In) composition, gate dielectric and oxide thickness. We observed that inversion capacitance and ballistic current tend to increase with the increase in Indium (In) content in InGaAs barrier layer.Comment: 5 pages, ICEDSA conference 201

Study of the capacitance technique for measuring high-temperature blade tip clearance on ceramic rotors

Higher operating temperatures required for increased engine efficiency can be achieved by using ceramic materials for engine components. Ceramic turbine rotors are subject to the same limitations with regard to gas path efficiency as their superalloy predecessors. In this study, a modified frequency-modulation system is proposed for the measurement of blade tip clearance on ceramic rotors. It is expected to operate up to 1370 C (2500 F), the working temperature of present engines with ceramic turbine rotors. The design of the system addresses two special problems associated with nonmetallic blades: the capacitance is less than that of a metal blade and the effects of temperature may introduce uncertainty with regard to the blade tip material composition. To increase capacitance and stabilize the measurement, a small portion of the rotor is modified by the application of 5-micron-thick platinum films. The platinum surfaces on the probe electrodes and rotor that are exposed to the high-velocity gas stream are coated with an additional 10-micron-thick protective ceramic topcoat. A finite-element method is applied to calculate the capacitance as a function of clearance

High Temperature Electronic Properties of a Microwave Frequency Sensor – GaN Schottky Diode

The potential energy barrier height, depletion layer thickness and junction capacitance properties of a microstructure GaN Schottky diode as a microwave frequency sensor have been estimated at extreme temperature (300 – 950K), under applied external bias (0 – 20V) by computational method based on the analytical expression obtained by the application of rule of thumb on the existing energy gap of n-GaN and existing solutions (depletion thickness and capacitance) of Poisson’s equation. The results of the calculation shown that the barrier height decreases as the temperature increases, but abrupt increase in the barrier height was observed as the temperature continues to increase above 900K. This behaviour may be linked to thermal stability demonstrated by n-GaN Schottky diode at high temperature. Also, the depletion thickness decreases as the temperature increases and the capacitance decreases as the bias increases. The decrease of the capacitance is much at high temperature under the same applied bias condition. The GaN Schottky diode can be employed as microwaves frequency sensor at very high temperature. Keywords: Barrier height, Depletion layer thickness, Junction capacitance, n-GaN Schottky diode, microwave sensor, high temperature

A Novel On-chip Three-dimensional Micromachined Calorimeter with Fully Enclosed and Suspended Thin-film Chamber for Thermal Characterization of Liquid Samples

A microfabricated calorimeter (μ-calorimeter) with an enclosed reaction chamber is presented. The 3D micromachined reaction chamber is capable of analyzing liquid samples with volume of 200 nl. The thin film low-stress silicon nitride membrane is used to reduce thermal mass of the calorimeter and increase the sensitivity of system. The μ-calorimeter has been designed to perform DC and AC calorimetry, thermal wave analysis, and differential scanning calorimetry. The μ-calorimeter fabricated with an integrated heater and a temperature sensor on opposite sides of the reaction chamber allows to perform thermal diffusivity and specific heat measurements on liquid samples with same device. Measurement results for diffusivity and heat capacitance using time delay method and thermal wave analysis are presented

Many-body effects on the capacitance of multilayers made from strongly correlated materials

Recent work by Kopp and Mannhart on novel electronic systems formed at oxide interfaces has shown interesting effects on the capacitances of these devices. We employ inhomogeneous dynamical mean-field theory to calculate the capacitance of multilayered nanostructures. These multilayered nanostructures are composed of semi-infinite metallic leads coupled via a strongly correlated dielectric barrier region. The barrier region can be adjusted from a metallic regime to a Mott insulator through adjusting the interaction strength. We examine the effects of varying the barrier width, temperature, potential difference, screening length, and chemical potential. We find that the interaction strength has a relatively strong effect on the capacitance, while the potential and temperature show weaker dependence.Comment: 19 pages, 7 figures, REVTe

A high-efficiency and compact charge pump with charge recycling scheme and finger boost capacitor

A 16-phase 8-branch charge pump with finger boost capacitor is proposed to increase the power efficiency. Compared with the standard capacitor, the finger capacitor can significantly reduce the parasitic capacitance. The proposed four-stage charge pump with finger capacitor can achieve 14.2 V output voltage from a 3 V power supply. The finger capacitor can increase the power efficiency of the charge pump to 60.5% and save chip area as well

Outstanding supercapacitive properties of Mn-doped TiO2 micro/nanostructure porous film prepared by anodization method.

Mn-doped TiO2 micro/nanostructure porous film was prepared by anodizing a Ti-Mn alloy. The film annealed at 300 °C yields the highest areal capacitance of 1451.3 mF/cm(2) at a current density of 3 mA/cm(2) when used as a high-performance supercapacitor electrode. Areal capacitance retention is 63.7% when the current density increases from 3 to 20 mA/cm(2), and the capacitance retention is 88.1% after 5,000 cycles. The superior areal capacitance of the porous film is derived from the brush-like metal substrate, which could greatly increase the contact area, improve the charge transport ability at the oxide layer/metal substrate interface, and thereby significantly enhance the electrochemical activities toward high performance energy storage. Additionally, the effects of manganese content and specific surface area of the porous film on the supercapacitive performance were also investigated in this work

AC impedance spectroscopy characteristics of chloride-exposed cement pastes

In this paper, the characteristics of AC impedance spectroscopy of cement paste immersed in chloride solution were measured and analyzed with a proposed equivalent circuit model. The elements in the proposed equivalent circuit, including the resistance of interface between electrode and specimens, resistance of continuous and discontinuous pore, capacitance of solid phase and electrical double layer (EDL) were discussed. The results showed that the resistance of interface between electrode and testing specimen was much lower than that of cement paste. With the increase of chloride concentration in the soaking solution, the resistance of continuous gradually decreased due to the higher conductivity of chloride solution. Stripped out the impacts of concentration of pore solution on resistance of pores, the resistance of continuous pore increased firstly due to the decrease of continuous pore volume from the formation of Friedel's salt. However, the resistance of discontinuous pores gradually decreased with the increase of soaking solution concentration due to the transformation of continuous pores to discontinuous pores. The reaction between chloride ions and hydration products and formation of Friedel's salt decreased the porosity of cement pastes and led to higher capacitance of solid phase. Based on an idealized two-plate capacitor model for EDL, the thickness of EDL was calculated from the measured capacitance. The decrease of EDL thickness with chloride concentration in soaking solution was in agreement with the results of chloride contents in EDL obtained from pore solution expression test. (C) 2019 Elsevier Ltd. All rights reserved