Science Writers' Guide to Landsat 7

This guide was produced for science writers and the media and profiles several Landsat 7 research projects, and provides background and contact information. Landsat 7 is advancing several areas of Earth science, mass balance, cloud and aerosol heights, as well as land topography and vegetation characteristics. including monitoring croplands and mapping Antarctic ice streams. Educational levels: Informal education

Report of the panel on volcanology, section 4

Two primary goals are identified as focal to NASA's research efforts in volcanology during the 1990s: to understand the eruption of lavas, gases, and aerosols from volcanoes, the dispersal of these materials on the Earth's surface and through the atmosphere, and the effects of these eruptions on the climate and environment; and to understand the physical processes that lead to the initiation of volcanic activity, that influence the styles of volcanic eruptions, and that dictate the morphology and evolution of volcanic landforms. Strategy and data requirements as well as research efforts are discussed

QWIPs, SLS, Landsat and the International Space Station

In 1988 DARPA provided funding to NASAs Goddard Space Flight Center to support the development of GaAs Quantum Well Infrared Photodetectors (QWIP). The goal was to make a single element photodetector that might be expandable to a two-dimensional array format. Ultimately, this led to the development of a 128 x 128 element array in collaboration with AT&T Bell Labs and Rockwell Science Center in 1990. We continued to develop numerous generations of QWIP arrays most recently resulting in the multi-QWIP focal plane for the NASA-US Geological Survey (USGS) Landsat 8 mission launched in 2013 and a similar instrument on the Landsat 9 mission to be launched in 2020. Toward the end of the Landsat 8 QWIP-based Thermal Infrared Sensor (TIRS) instrument the potential of the newly developed Strained Layer Superlattice (SLS) detector array technology became of great interest to NASA for three primary reasons: 1) higher operating temperature; 2) broad spectral response and; 3) higher sensitivity. We have collaborated extensively with QmagiQ, LLC and Northwestern University to further pursue and advance the SLS technology ever since we started back in 2012. In December of 2018 we launched the first SLS-based IR camera system to the International Space Station on board the Robotic Refueling Mission #3 (RRM3). This paper will describe the evolution of QWIP technology leading to the current development of SLS-based imaging systems at the Goddard Space Flight Center over the past 30 years

NASA geology program bibliography

A bibliography of scientific papers, articles, and books based on research supported by the NASA Geology Program is given. The citations cover the period 1980 to 1990. An author index is included

User's guide to image processing applications of the NOAA satellite HRPT/AVHRR data. Part 1: Introduction to the satellite system and its applications. Part 2: Processing and analysis of AVHRR imagery

The use of NOAA Advanced Very High Resolution Radar/High Resolution Picture Transmission (AVHRR/HRPT) imagery for earth resource applications is provided for the applications scientist for use within the various Earth science, resource, and agricultural disciplines. A guide to processing NOAA AVHRR data using the hardware and software systems integrated for this NASA project is provided. The processing steps from raw data on computer compatible tapes (1B data format) through usable qualitative and quantitative products for applications are given. The manual is divided into two parts. The first section describes the NOAA satellite system, its sensors, and the theoretical basis for using these data for environmental applications. Part 2 is a hands-on description of how to use a specific image processing system, the International Imaging Systems, Inc. (I2S) Model 75 Array Processor and S575 software, to process these data

Geologic application of thermal inertia imaging using HCMM data

Three test sites in the western US were selected to discriminate among surface geologic materials on the basis of their thermal properties as determined from HCMM data. Attempts to determine quantitatively accurate thermal inertia values from HCMM digital data met with only partial success due to the effects of sensor miscalibrations, radiative transfer in the atmosphere, and varying meteorology and elevation across a scene. In most instances, apparent thermal inertia was found to be an excellent qualitative representation of true thermal inertia. Computer processing of digital day and night HCMM data allowed construction of geologically useful images. At some test sites, more information was provided by data than LANDSAT data. Soil moisture effects and differences in spectrally dark materials were more effectively displayed using the thermal data

HIRIS (High-Resolution Imaging Spectrometer: Science opportunities for the 1990s. Earth observing system. Volume 2C: Instrument panel report

The high-resolution imaging spectrometer (HIRIS) is an Earth Observing System (EOS) sensor developed for high spatial and spectral resolution. It can acquire more information in the 0.4 to 2.5 micrometer spectral region than any other sensor yet envisioned. Its capability for critical sampling at high spatial resolution makes it an ideal complement to the MODIS (moderate-resolution imaging spectrometer) and HMMR (high-resolution multifrequency microwave radiometer), lower resolution sensors designed for repetitive coverage. With HIRIS it is possible to observe transient processes in a multistage remote sensing strategy for Earth observations on a global scale. The objectives, science requirements, and current sensor design of the HIRIS are discussed along with the synergism of the sensor with other EOS instruments and data handling and processing requirements

Legal Challenges and Market Rewards to the Use and Acceptance of Remote Sensing and Digital Information as Evidence

Bakgrund I den nutida forskningen är det essentiellt att företag tar hänsyn till medarbetarnas motivation så att de gynnas av det arbetssätt som tillämpas. En arbetsmetod som blivit allt vanligare är konceptet Lean som ursprungligen kommer från den japanska bilindustrin. Lean har idag utvecklats till ett allmängiltigt koncept som tillämpas i flertalet branscher världen över. Trots att konceptet innebär flertalet positiva aspekter har det fått utstå stark kritik när det kommer till de mänskliga aspekterna och forskare har ställt sig frågan om Lean är "Mean". Kritiken härleds främst till medarbetares arbetsmiljö i form av stress och brist på variation, självbestämmande, hälsa och välmående. Få empiriska studier har däremot genomförts som undersöker konsekvenserna som Lean får på medarbetares upplevda motivation. Syfte Vårt syfte är att undersöka och öka förståelsen för medarbetares upplevelser av motivationen i företag som tillämpar Lean. Vidare har studien för avsikt att utreda om det föreligger en paradox mellan Lean och vad som motiverar medarbetare på en arbetsplats. Metod Studien har utgått från en kvalitativ metod via intervjuer. För att göra en djupare undersökning och analysera hur vårt fenomen, motivation, upplevs i en kontext med Lean tillämpade vi Små-N-studier. Vi har även haft en iterativ forskningsansats som förenat den deduktiva och induktiva ansatsen där studien pendlat mellan teorier och empiriska observationer fram tills det slutgiltiga resultatet. Slutsatser Utefter medarbetarnas upplevelser har vi identifierat att det inte föreligger någon paradox mellan Lean och motivation eftersom övervägande antal medarbetare upplevde att de är motiverade även om företaget tillämpar Lean. Dock har studien kunnat urskilja både stödjande och motverkande faktorer när det kommer till medarbetarnas upplevda arbetsförhållanden som i sin tur inverkar på motivationen. De motverkande faktorerna menar vi främst beror på att arbetsförhållandena i somliga fall innehåller höga prestationskrav, målstyrning samt standardiseringar. Vidare upplevs motivationen överlag som mer positiv när företagen använder en mjukare form av Lean där samtliga medlemmars intressen beaktas.Background In modern research, it is essential that companies consider employees’ motivation so that they benefit from the applied practices. A working method that has become increasingly common is the concept Lean, which has its origin in the Japanese automotive industry. Today, Lean has evolved into a universal concept that is applied in many industries worldwide. Although the concept involves numerous positive aspects it has endured strong criticism when it comes to the human aspects and researchers have raised the question if Lean is "Mean". Criticism is derived primarily to employees’ working conditions in terms of stress and lack, variation, autonomy, health and wellbeing. However, few empirical studies have been carried out that examines the impact that Lean has on employees’ experienced motivation. Aim The aim is to increase the understanding of employees’ experienced motivation in companies that practice Lean. Further on the study has the intention to investigate if there is a paradox between Lean and what motivates employees on work. Methodology The study has been conducted through a qualitative method by interviews and to be able to do a deeper examination and analyze how our phenomenon, motivation, is experienced in a Lean context we applied small-N-studies. Our strategy has been iterative, combining both a deductive and inductive approach, where the study has varied between theories and empirical observations until the final result. Conclusions We have identified that there is no paradox between Lean and motivation since the majority of employees’ experienced that they are motivated even though the company practice Lean. Nevertheless the study shows that there are both supportive and counteractive factors when it comes to the employees’ experienced working conditions. The counteractive factors consists foremost of high performance standards, goal steering and standardizations, and have in some cases a negative influence on the working conditions. Furthermore the experienced motivation is more positive overall when the companies use a softer form of Lean where all the members’ interests are taken into account

NASA Sea Ice Validation Program for the Defense Meteorological Satellite Program Special Sensor Microwave Imager

The history of the program is described along with the SSM/I sensor, including its calibration and geolocation correction procedures used by NASA, SSM/I data flow, and the NASA program to distribute polar gridded SSM/I radiances and sea ice concentrations (SIC) on CD-ROMs. Following a discussion of the NASA algorithm used to convert SSM/I radiances to SICs, results of 95 SSM/I-MSS Landsat IC comparisons for regions in both the Arctic and the Antarctic are presented. The Landsat comparisons show that the overall algorithm accuracy under winter conditions is 7 pct. on average with 4 pct. negative bias. Next, high resolution active and passive microwave image mosaics from coordinated NASA and Navy aircraft underflights over regions of the Beaufort and Chukchi seas in March 1988 were used to show that the algorithm multiyear IC accuracy is 11 pct. on average with a positive bias of 12 pct. Ice edge crossings of the Bering Sea by the NASA DC-8 aircraft were used to show that the SSM/I 15 pct. ice concentration contour corresponds best to the location of the initial bands at the ice edge. Finally, a summary of results and recommendations for improving the SIC retrievals from spaceborne radiometers are provided

Radiometric calibration and processing procedure for reflective bands on LANDSAT-4 protoflight Thematic Mapper

The radiometric subsystem of NASA's LANDSAT-4 Thematic Mapper (TM) sensor is described. Special emphasis is placed on the internal calibrator (IC) pulse shapes and timing cycle. The procedures for the absolute radiometric calibration of the TM channels with a 122-centimeter integrating sphere and the transfer of radiometric calibration from the channels to the IC are reviewed. The use of the IC to calibrate TM data in the ground processing system consists of pulse integration, pulse averaging, IC state identification, linear regression analysis, and histogram equalization. An overview of the SCROUNGE-era (before August 1983) method is presented. Procedural differences between SCROUNGE and the TIPS-era (after July 1983) and the implications of these differences are discussed