Dependable reconfigurable multi-sensor poles for security

Wireless sensor network poles for security monitoring under harsh environments require a very high dependability as they are safety-critical [1]. An example of a multi-sensor pole is shown. Crucial attribute in these systems for security, especially in harsh environment, is a high robustness and guaranteed availability during lifetime. This environment could include molest. In this paper, two approaches are used which are applied simultaneously but are developed in different projects. \u

Online and Offline BIST in IP-Core Design

This article presents an online and offline built-in self-test architecture implemented as an SRAM intellectual-property core for telecommunication applications. The architecture combines fault-latency reduction, code-based fault detection, and architecture-based fault avoidance to meet reliability constraint

On-Line Dependability Enhancement of Multiprocessor SoCs by Resource Management

This paper describes a new approach towards dependable design of homogeneous multi-processor SoCs in an example satellite-navigation application. First, the NoC dependability is functionally verified via embedded software. Then the Xentium processor tiles are periodically verified via on-line self-testing techniques, by using a new IIP Dependability Manager. Based on the Dependability Manager results, faulty tiles are electronically excluded and replaced by fault-free spare tiles via on-line resource management. This integrated approach enables fast electronic fault detection/diagnosis and repair, and hence a high system availability. The dependability application runs in parallel with the actual application, resulting in a very dependable system. All parts have been verified by simulation

Application development process for GNAT, a SOC networked system

The market for smart devices was identified years ago, and yet commercial progress into this field has not made significant progress. The reason such devices are so painfully slow to market is that the gap between the technologically possible and the market capitalizable is too vast. In order for inventions to succeed commercially, they must bridge the gap to tomorrow\u27s technology with marketability today. This thesis demonstrates a design methodology that enables such commercial success for one variety of smart device, the Ambient Intelligence Node (AIN). Commercial Off-The Shelf (COTS) design tools allowing a Model-Driven Architecture (MDA) approach are combined via custom middleware to form an end-to-end design flow for rapid prototyping and commercialization. A walkthrough of this design methodology demonstrates its effectiveness in the creation of Global Network Academic Test (GNAT), a sample AIN. It is shown how designers are given the flexibility to incorporate IP Blocks available in the Global Economy to reduce Time-To-Market and cost. Finally, new kinds of products and solutions built on the higher levels of design abstraction permitted by MDA design methods are explored

Infrastructures and Algorithms for Testable and Dependable Systems-on-a-Chip

Every new node of semiconductor technologies provides further miniaturization and higher performances, increasing the number of advanced functions that electronic products can offer. Silicon area is now so cheap that industries can integrate in a single chip usually referred to as System-on-Chip (SoC), all the components and functions that historically were placed on a hardware board. Although adding such advanced functionality can benefit users, the manufacturing process is becoming finer and denser, making chips more susceptible to defects. Today’s very deep-submicron semiconductor technologies (0.13 micron and below) have reached susceptibility levels that put conventional semiconductor manufacturing at an impasse. Being able to rapidly develop, manufacture, test, diagnose and verify such complex new chips and products is crucial for the continued success of our economy at-large. This trend is expected to continue at least for the next ten years making possible the design and production of 100 million transistor chips. To speed up the research, the National Technology Roadmap for Semiconductors identified in 1997 a number of major hurdles to be overcome. Some of these hurdles are related to test and dependability. Test is one of the most critical tasks in the semiconductor production process where Integrated Circuits (ICs) are tested several times starting from the wafer probing to the end of production test. Test is not only necessary to assure fault free devices but it also plays a key role in analyzing defects in the manufacturing process. This last point has high relevance since increasing time-to-market pressure on semiconductor fabrication often forces foundries to start volume production on a given semiconductor technology node before reaching the defect densities, and hence yield levels, traditionally obtained at that stage. The feedback derived from test is the only way to analyze and isolate many of the defects in today’s processes and to increase process’s yield. With the increasing need of high quality electronic products, at each new physical assembly level, such as board and system assembly, test is used for debugging, diagnosing and repairing the sub-assemblies in their new environment. Similarly, the increasing reliability, availability and serviceability requirements, lead the users of high-end products performing periodic tests in the field throughout the full life cycle. To allow advancements in each one of the above scaling trends, fundamental changes are expected to emerge in different Integrated Circuits (ICs) realization disciplines such as IC design, packaging and silicon process. These changes have a direct impact on test methods, tools and equipment. Conventional test equipment and methodologies will be inadequate to assure high quality levels. On chip specialized block dedicated to test, usually referred to as Infrastructure IP (Intellectual Property), need to be developed and included in the new complex designs to assure that new chips will be adequately tested, diagnosed, measured, debugged and even sometimes repaired. In this thesis, some of the scaling trends in designing new complex SoCs will be analyzed one at a time, observing their implications on test and identifying the key hurdles/challenges to be addressed. The goal of the remaining of the thesis is the presentation of possible solutions. It is not sufficient to address just one of the challenges; all must be met at the same time to fulfill the market requirements

FPGA ARCHITECTURE AND VERIFICATION OF BUILT IN SELF-TEST (BIST) FOR 32-BIT ADDER/SUBTRACTER USING DE0-NANO FPGA AND ANALOG DISCOVERY 2 HARDWARE

The integrated circuit (IC) is an integral part of everyday modern technology, and its application is very attractive to hardware and software design engineers because of its versatility, integration, power consumption, cost, and board area reduction. IC is available in various types such as Field Programming Gate Array (FPGA), Application Specific Integrated Circuit (ASIC), System on Chip (SoC) architecture, Digital Signal Processing (DSP), microcontrollers (μC), and many more. With technology demand focused on faster, low power consumption, efficient IC application, design engineers are facing tremendous challenges in developing and testing integrated circuits that guaranty functionality, high fault coverage, and reliability as the transistor technology is shrinking to the point where manufacturing defects of ICs are affecting yield which associates with the increased cost of the part. The competitive IC market is pressuring manufactures of ICs to develop and market IC in a relatively quick turnaround which in return requires design and verification engineers to develop an integrated self-test structure that would ensure fault-free and the quality product is delivered on the market. 70-80% of IC design is spent on verification and testing to ensure high quality and reliability for the enduser. To test complex and sophisticated IC designs, the verification engineers must produce laborious and costly test fixtures which affect the cost of the part on the competitive market. To avoid increasing the part cost due to yield and test time to the end-user and to keep up with the competitive market many IC design engineers are deviating from complex external test fixture approach and are focusing on integrating Built-in Self-Test (BIST) or Design for Test (DFT) techniques onto IC’s which would reduce time to market but still guarantee high coverage for the product. Understanding the BIST, the architecture, as well as the application of IC, must be understood before developing IC. The architecture of FPGA is elaborated in this paper followed by several BIST techniques and applications of those BIST relative to FPGA, SoC, analog to digital (ADC), or digital to analog converters (DAC) that are integrated on IC. Paper is concluded with verification of BIST for the 32-bit adder/subtracter designed in Quartus II software using the Analog Discovery 2 module as stimulus and DE0-NANO FPGA board for verification

Test Strategies for Embedded ADC Cores in a System-on-Chip, A Case Study

Testing of a deeply embedded mixed-signal core in a System-on-Chip (SoC) is a challenging issue due to the communication bottleneck in accessing the core from external automatic test equipment. Consequently, in many cases the preferred approach is built-in self-test (BIST), where the major part of test activity is performed within the unit-under-test and only final results are communicated to the external tester. IEEE Standard 1500 provides efficient test infrastructure for testing digital cores; however, its applications in mixed-signal core test remain an open issue. In this paper we address the problem of implementing BIST of a mixed-signal core in a IEEE Std 1500 test wrapper and discuss advantages and drawbacks of different test strategies. While the case study is focused on histogram based test of ADC, test strategies of other types of mixed-signal cores related to trade-off between performance (i.e., test time) and required resources are likely to follow similar conclusions

Efficient Built In Self Repair Strategy for Embedded SRAM with selecteble redundancy

Built-in self -test (BIST) refers to those testing techniques where additional hardware is added to a design so that testing is accomplished without the aid of external hardware. Usually, a pseudo-random generator is used to apply test vectors to the circuit under test and a data compactor is used to produce a signature. To increase the reliability and yield of embedded memories, many redundancy mechanisms have been proposed. All the redundancy mechanisms bring penalty of area and complexity to embedded memories design. Considered that compiler is used to configure SRAM for different needs, the BISR had better bring no change to other modules in SRAM. To solve the problem, a new redundancy scheme is proposed in this paper. Some normal words in embedded memories can be selected as redundancy instead of adding spare words, spare rows, spare columns or spare blocks. Built-In Self-Repair (BISR) with Redundancy is an effective yield-enhancement strategy for embedded memories. This paper proposes an efficient BISR strategy which consists of a Built-In Self-Test (BIST) module, a Built-In Address-Analysis (BIAA) module and a Multiplexer (MUX) module. The BISR is designed flexible that it can provide four operation modes to SRAM users. Each fault address can be saved only once is the feature of the proposed BISR strategy. In BIAA module, fault addresses and redundant ones form a one- to- one mapping to achieve a high repair speed. Besides, instead of adding spare words, rows, columns or blocks in the SRAMs, users can select normal words as redundancy

SoC Test: Trends and Recent Standards

The well-known approaching test cost crisis, where semiconductor test costs begin to approach or exceed manufacturing costs has led test engineers to apply new solutions to the problem of testing System-On-Chip (SoC) designs containing multiple IP (Intellectual Property) cores. While it is not yet possible to apply generic test architectures to an IP core within a SoC, the emergence of a number of similar approaches, and the release of new industry standards, such as IEEE 1500 and IEEE 1450.6, may begin to change this situation. This paper looks at these standards and at some techniques currently used by SoC test engineers. An extensive reference list is included, reflecting the purpose of this publication as a review paper