16,098 research outputs found
Service and device discovery of nodes in a wireless sensor network
Emerging wireless communication standards and more capable sensors and actuators have pushed further development of wireless sensor networks. Deploying a large number of sensor\ud
nodes requires a high-level framework enabling the devices to present themselves and the resources they hold. The device and the resources can be described as services, and in this paper, we review a number of well-known service discovery protocols. Bonjour stands out with its auto-configuration, distributed architecture, and sharing of resources. We also present a lightweight implementation in order to demonstrate that an emerging standards-based device and service discovery protocol can actually be deployed on small wireless sensor nodes
Wireless body sensor networks for health-monitoring applications
This is an author-created, un-copyedited version of an article accepted for publication in
Physiological Measurement. The publisher is
not responsible for any errors or omissions in this version of the manuscript or any version
derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01
Wireless Medical Sensor Networks: Design Requirements and Enabling Technologies
This article analyzes wireless communication protocols that could be used in healthcare environments (e.g., hospitals and small clinics) to transfer real-time medical information obtained from noninvasive sensors. For this purpose the features of the three currently most widely used protocolsânamely, BluetoothÂź (IEEE 802.15.1), ZigBee (IEEE 802.15.4), and Wi-Fi (IEEE 802.11)âare evaluated and compared. The important features under consideration include data bandwidth, frequency band, maximum transmission distance, encryption and authentication methods, power consumption, and current applications. In addition, an overview of network requirements with respect to medical sensor features, patient safety and patient data privacy, quality of service, and interoperability between other sensors is briefly presented. Sensor power consumption is also discussed because it is considered one of the main obstacles for wider adoption of wireless networks in medical applications. The outcome of this assessment will be a useful tool in the hands of biomedical engineering researchers. It will provide parameters to select the most effective combination of protocols to implement a specific wireless network of noninvasive medical sensors to monitor patients remotely in the hospital or at home
Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions
Traditional power grids are being transformed into Smart Grids (SGs) to
address the issues in existing power system due to uni-directional information
flow, energy wastage, growing energy demand, reliability and security. SGs
offer bi-directional energy flow between service providers and consumers,
involving power generation, transmission, distribution and utilization systems.
SGs employ various devices for the monitoring, analysis and control of the
grid, deployed at power plants, distribution centers and in consumers' premises
in a very large number. Hence, an SG requires connectivity, automation and the
tracking of such devices. This is achieved with the help of Internet of Things
(IoT). IoT helps SG systems to support various network functions throughout the
generation, transmission, distribution and consumption of energy by
incorporating IoT devices (such as sensors, actuators and smart meters), as
well as by providing the connectivity, automation and tracking for such
devices. In this paper, we provide a comprehensive survey on IoT-aided SG
systems, which includes the existing architectures, applications and prototypes
of IoT-aided SG systems. This survey also highlights the open issues,
challenges and future research directions for IoT-aided SG systems
Long-Range Communications in Unlicensed Bands: the Rising Stars in the IoT and Smart City Scenarios
Connectivity is probably the most basic building block of the Internet of
Things (IoT) paradigm. Up to know, the two main approaches to provide data
access to the \emph{things} have been based either on multi-hop mesh networks
using short-range communication technologies in the unlicensed spectrum, or on
long-range, legacy cellular technologies, mainly 2G/GSM, operating in the
corresponding licensed frequency bands. Recently, these reference models have
been challenged by a new type of wireless connectivity, characterized by
low-rate, long-range transmission technologies in the unlicensed sub-GHz
frequency bands, used to realize access networks with star topology which are
referred to a \emph{Low-Power Wide Area Networks} (LPWANs). In this paper, we
introduce this new approach to provide connectivity in the IoT scenario,
discussing its advantages over the established paradigms in terms of
efficiency, effectiveness, and architectural design, in particular for the
typical Smart Cities applications
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
Goodbye, ALOHA!
©2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.The vision of the Internet of Things (IoT) to interconnect and Internet-connect everyday people, objects, and machines poses new challenges in the design of wireless communication networks. The design of medium access control (MAC) protocols has been traditionally an intense area of research due to their high impact on the overall performance of wireless communications. The majority of research activities in this field deal with different variations of protocols somehow based on ALOHA, either with or without listen before talk, i.e., carrier sensing multiple access. These protocols operate well under low traffic loads and low number of simultaneous devices. However, they suffer from congestion as the traffic load and the number of devices increase. For this reason, unless revisited, the MAC layer can become a bottleneck for the success of the IoT. In this paper, we provide an overview of the existing MAC solutions for the IoT, describing current limitations and envisioned challenges for the near future. Motivated by those, we identify a family of simple algorithms based on distributed queueing (DQ), which can operate for an infinite number of devices generating any traffic load and pattern. A description of the DQ mechanism is provided and most relevant existing studies of DQ applied in different scenarios are described in this paper. In addition, we provide a novel performance evaluation of DQ when applied for the IoT. Finally, a description of the very first demo of DQ for its use in the IoT is also included in this paper.Peer ReviewedPostprint (author's final draft
- âŠ