187 research outputs found
Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks
Cognitive radio has been widely considered as one of the prominent solutions
to tackle the spectrum scarcity. While the majority of existing research has
focused on single-band cognitive radio, multiband cognitive radio represents
great promises towards implementing efficient cognitive networks compared to
single-based networks. Multiband cognitive radio networks (MB-CRNs) are
expected to significantly enhance the network's throughput and provide better
channel maintenance by reducing handoff frequency. Nevertheless, the wideband
front-end and the multiband spectrum access impose a number of challenges yet
to overcome. This paper provides an in-depth analysis on the recent
advancements in multiband spectrum sensing techniques, their limitations, and
possible future directions to improve them. We study cooperative communications
for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also
investigate several limits and tradeoffs of various design parameters for
MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that
differ from the conventional metrics used for single-band based networks.Comment: 22 pages, 13 figures; published in the Proceedings of the IEEE
Journal, Special Issue on Future Radio Spectrum Access, March 201
Compressed sensing based cyclic feature spectrum sensing for cognitive radios
Spectrum sensing is currently one of the most challenging design problems in cognitive radio. A robust spectrum sensing technique is important in allowing implementation of a practical dynamic spectrum access in noisy and interference uncertain environments. In addition, it is desired to minimize the sensing time, while meeting the stringent cognitive radio application requirements. To cope with this challenge, cyclic spectrum sensing techniques have been proposed. However, such techniques require very high sampling rates in the wideband regime and thus are costly in hardware implementation and power consumption. In this thesis the concept of compressed sensing is applied to circumvent this problem by utilizing the sparsity of the two-dimensional cyclic spectrum. Compressive sampling is used to reduce the sampling rate and a recovery method is developed for re- constructing the sparse cyclic spectrum from the compressed samples. The reconstruction solution used, exploits the sparsity structure in the two-dimensional cyclic spectrum do-main which is different from conventional compressed sensing techniques for vector-form sparse signals. The entire wideband cyclic spectrum is reconstructed from sub-Nyquist-rate samples for simultaneous detection of multiple signal sources. After the cyclic spectrum recovery two methods are proposed to make spectral occupancy decisions from the recovered cyclic spectrum: a band-by-band multi-cycle detector which works for all modulation schemes, and a fast and simple thresholding method that works for Binary Phase Shift Keying (BPSK) signals only. In addition a method for recovering the power spectrum of stationary signals is developed as a special case. Simulation results demonstrate that the proposed spectrum sensing algorithms can significantly reduce sampling rate without sacrifcing performance. The robustness of the algorithms to the noise uncertainty of the wireless channel is also shown
Wideband cyclostationary spectrum sensing and characterization for cognitive radios
Motivated by the spectrum scarcity problem, Cognitive Radios (CRs) have been proposed as a solution to opportunistically communicate over unused spectrum licensed to Primary users (PUs). In this context, the unlicensed Secondary users (SUs) sense the spectrum to detect the presence or absence of PUs, and use the unoccupied bands without causing interference to PUs. CRs are equipped with capabilities such as, learning, adaptability, and recongurability, and are spectrum aware. Spectrum awareness comes from spectrum sensing, and it can be performed using different techniques
Recommended from our members
MOCZ for Blind Short-Packet Communication: Practical Aspects
We investigate practical aspects of a recently introduced blind (noncoherent) communication scheme, called modulation on conjugate-reciprocal zeros (MOCZ). MOCZ is suitable for a reliable transmission of sporadic and short-packets at ultra-low latency and high spectral efficiency via unknown multipath channels, which are assumed to be static over the receive duration of one packet. The information is modulated on the zeros of the transmitted discrete-time baseband signal’s z− transform. Because of ubiquitous impairments between the transmitter and receiver clocks, a carrier frequency offset occurs after down-conversion to the baseband. This results in a common rotation of the zeros. To identify fractional rotations of the base angle in the zero-pattern, we propose an oversampled direct zero-testing decoder to identify the most likely one. Integer rotations correspond to cyclic shifts of the binary message, which we determine by cyclically permutable codes (CPC). Additionally, the embedding of CPCs into cyclic codes, enables additive error-correction which reduces the bit-error-rate tremendously. Furthermore, we exploit the trident structure in the signal’s autocorrelation for an energy based detector to estimate timing offsets and the effective channel delay spread. We finally demonstrate how this joint data and channel estimation can be largely improved by receive antenna diversity at low SNR
Automatic Modulation Classification Using Cyclic Features via Compressed Sensing
Cognitive Radios (CRs) are designed to operate with minimal interference to the Primary User (PU), the incumbent to a radio spectrum band. To ensure that the interference generated does not exceed a specific level, an estimate of the Signal to Interference plus Noise Ratio (SINR) for the PU’s channel is required. This can be accomplished through determining the modulation scheme in use, as it is directly correlated with the SINR. To this end, an Automatic Modulation Classification (AMC) scheme is developed via cyclic feature detection that is successful even with signal bandwidths that exceed the sampling rate of the CR. In order to accomplish this, Compressed Sensing (CS) is applied, allowing for reconstruction, even with very few samples. The use of CS in spectrum sensing and interpretation is becoming necessary for a growing number of scenarios where the radio spectrum band of interest cannot be fully measured, such as low cost sensor networks, or high bandwidth radio localization services.
In order to be able to classify a wide range of modulation types, cumulants were chosen as the feature to use. They are robust to noise and provide adequate discrimination between different types of modulation, even those that are fairly similar, such as 16-QAM and 64-QAM. By fusing cumulants and CS, a novel method of classification was developed which inherited the noise resilience of cumulants, and the low sample requirements of CS. Comparisons are drawn between the proposed method and existing ones, both in terms of accuracy and resource usages. The proposed method is shown to perform similarly when many samples are gathered, and shows improvement over existing methods at lower sample counts. It also uses less resources, and is able to produce an estimate faster than the current systems
- …