Robust and fast sliding-mode control for a DC-DC current-source parallel-resonant converter

Modern DC-DC resonant converters are normally built around a voltage-source series-resonant converter. This study aims to facilitate the practical use of current-source parallel-resonant converters due to their outstanding properties. To this end, this study presents a sliding-mode control scheme, which provides the following features to the closed-loop system: (i) high robustness to external disturbances and parameter variations and (ii) fast transient response during large and abrupt load changes. In addition, a design procedure for determining the values of the control parameters is presented. The theoretical contributions of this study are experimentally validated by selected tests on a laboratory prototype.Peer ReviewedPreprin

Frequency-modulation control of a DC/DC current-source parallel-resonant converter

This paper proposes a frequency-modulation control scheme for a dc/dc current-source parallel-resonant converter with two possible configurations. The basic configuration comprises an external voltage loop, an internal current loop, and a frequency modulator: the voltage loop is responsible for regulating the output voltage, the current loop makes the system controllable and limits the input current, and the modulator provides robustness against variations in resonant component values. The enhanced configuration introduces the output inductor current as a feed-forward term and clearly improves the transient response to fast load changes. The theoretical design of these control schemes is performed systematically by first deriving their small-signal models and second using Bode diagram analysis. The actual performance of the proposed control schemes is experimentally validated by testing on a laboratory prototype.Peer ReviewedPostprint (author's final draft

Analysis, design and implementation of a residential inductive contactless energy transfer system with multiple mobile clamps

This study presents the analysis, design and implementation of a simple and cost-effective residential inductive contactless energy transfer system with multiple mobile clamps. The topology is based on the cascaded connection of a buck converter and a high-frequency resonant inverter loaded by several output passive rectifiers. The proposed system includes a sliding transformer to supply the mobile loads, leading to a safe and flexible location of loads. The theoretical analysis and design of the proposed system is based on a mathematical model derived using the first harmonic approximation. Selected experimental results are included to verify the system features. In comparison with conventional topology, the proposed system significantly improves efficiency, complexity and cost.Peer ReviewedPostprint (author's final draft

Design Optimization of Inductive Power Transfer Systems for Contactless Electric Vehicle Charging Applications

Contactless Electric Vehicle (EV) charging based on magnetic resonant induction is an emerging technology that can revolutionize the future of the EV industry and transportation systems by enabling an automated and convenient charging process. However, in order to make this technology an acceptable alternative for conventional plug-in charging systems it needs to be optimized for different design measures. Specifically, the efficiency of an inductive EV charging system is of a great importance and should be comparable to the efficiency of conventional plug-in EV chargers. The aim of this study is to develop solutions that contribute to the design enhancement of inductive EV charging systems. Specifically, generalized physics-based design optimization methods that address the trade-off problem between several key objectives including efficiency, power density, misalignment tolerance, and cost efficiency considering critical constraints are developed. Using the developed design methodology, a 3.7kW inductive charging system with square magnetic structures is investigated as a case study and a prototype is built to validate the optimization results. The developed prototype achieves 93.65% efficiency (DC-to-DC) and a power density of 1.65kW/dm3. Also, self-tuning power transfer control methods with resonance frequency tracking capability and bidirectional power transfer control are presented. The proposed control methods enhance the efficiency of power converters and reduce the Electromagnetic Interference (EMI) by enabling soft-switching operations. Several simplified digital controllers are developed and experimentally implemented. The controllers are implemented without the use of DSP/FPGA solutions. Experimental tests show that of the developed simplified controllers can effectively regulate the power transfer around the desired value. Moreover, the experiments show that compared to conventional converters, the developed converters can achieve 4% higher efficiency at low power levels. Moreover, enhanced matrix converter topologies that can achieve bidirectional power transfer and high efficiency with a reduced number of switching elements are introduced. The self-tuning controllers are utilized to design and develop control schemes for bidirectional power transfer regulation. The simulation analyses and experimental results show that the developed matrix converters can effectively establish bidirectional power transfer at the desired power levels with soft-switching operations and resonance frequency tracking capability. Specifically, a direct three-phase AC-AC matrix converter with a reduced number of switches (only seven) is developed and built. It is shown that the developed converters can achieve efficiencies as high as 98.54% at high power levels and outperform conventional two-stage converters

A New Methodology for Contactless Energy System Using Inductive Coil Positioning Flexibility

This paper portrays a system, Contactlesstransmission of electrical energyfrom a power source to an electrical load without interconnecting conductor. As of late, expanded remote power exchange frameworks innovation exploration has prompted frameworks with higher effectiveness. Contactless transmission is helpful in situations where interconnecting wires are badly arranged, incomprehensible or perilous. These days electrically worked hardware's are associated with the supply by means of plugs & sockets, however can be hazardous or have constrained life in the vicinity of dampness. In dangerous areas and in submerged applications, the Contactless EnergyTransmission System(CETS), by which electrical energy may be transmitted, without electrical association or physical contact, through nonmagnetic media of low conductivity. The CETS has been utilized to exchange up to 5kW over a 10-mm crevice, utilizes high-frequency attractive coupling and empowers module power associations will be made in dangerous natural conditions without the danger of electric shock, short-circuiting, or starting. With contactless Inductive Power Transfer (IPT), it is conceivable to exchange electrical energy to stationary or mobile consumers without contacts, links, or slip rings, another precise and particular configuration displayed in this paper

Inductive Wireless Power Transfer Charging for Electric vehicles - A Review

Considering a future scenario in which a driverless Electric Vehicle (EV) needs an automatic charging system without human intervention. In this regard, there is a requirement for a fully automatable, fast, safe, cost-effective, and reliable charging infrastructure that provides a profitable business model and fast adoption in the electrified transportation systems. These qualities can be comprehended through wireless charging systems. Wireless Power Transfer (WPT) is a futuristic technology with the advantage of flexibility, convenience, safety, and the capability of becoming fully automated. In WPT methods resonant inductive wireless charging has to gain more attention compared to other wireless power transfer methods due to high efficiency and easy maintenance. This literature presents a review of the status of Resonant Inductive Wireless Power Transfer Charging technology also highlighting the present status and its future of the wireless EV market. First, the paper delivers a brief history throw lights on wireless charging methods, highlighting the pros and cons. Then, the paper aids a comparative review of different type’s inductive pads, rails, and compensations technologies done so far. The static and dynamic charging techniques and their characteristics are also illustrated. The role and importance of power electronics and converter types used in various applications are discussed. The batteries and their management systems as well as various problems involved in WPT are also addressed. Different trades like cyber security economic effects, health and safety, foreign object detection, and the effect and impact on the distribution grid are explored. Prospects and challenges involved in wireless charging systems are also highlighting in this work. We believe that this work could help further the research and development of WPT systems.publishedVersio

Wireless power and data transfer via a common inductive link using frequency division multiplexing

For wireless power transfer (WPT) systems, communication between the primary side and the pickup side is a challenge because of the large air gap and magnetic interferences. A novel method, which integrates bidirectional data communication into a high-power WPT system, is proposed in this paper. The power and data transfer share the same inductive link between coreless coils. Power/data frequency division multiplexing technique is applied, and the power and data are transmitted by employing different frequency carriers and controlled independently. The circuit model of the multiband system is provided to analyze the transmission gain of the communication channel, as well as the power delivery performance. The crosstalk interference between two carriers is discussed. In addition, the signal-to-noise ratios of the channels are also estimated, which gives a guideline for the design of mod/demod circuits. Finally, a 500-W WPT prototype has been built to demonstrate the effectiveness of the proposed WPT system

Dynamic modelling and control schemes for current-source resonant converters

Versió amb diverses seccions retallades, per drets de l'editorThis thesis focuses on the control methods applied to current source resonant converters, especially in two different applications of switching power supplies and wire-less power transfer systems. In fact, the existing applications are mostly working with voltage source resonant converters. For voltage-source resonant converters, many control strategies have been analyzed and investigated, turning this into a mature technology nowadays. The current-source resonant converter is an alternative solution as they offer well-known advantages such as non-pulsating input current, low stress for switches, simple driving circuitry, and short circuit protection capabilities. However, there is an obvious lack of control methods applicable to current-source resonant converters. In addition, obtaining an appropriate dynamic model to be used in control design is the other challenging issue in this field. Hence, the objectives of this thesis are used to fill these gaps. The proposed control schemes are: - Frequency modulation control scheme applied to a DC/DC current-source parallel resonant converter. - Sliding mode control scheme with amplitude modulation applied to a DC/DC current-source parallel resonant converter. - A control scheme for a multiple-output DC/DC current-source parallel resonant converter. - A communication-less control scheme for a variable air-gap wireless energy transfer system using a current-source resonant converter.Esta tesis doctoral está centrada en los métodos de control aplicados a los convertidores resonantes con fuente de corriente, especialmente en dos aplicaciones distintas como son fuentes de alimentación conmutadas y sistemas de transferencia de energía sin hilos. De hecho, las aplicaciones existentes trabajan principalmente con convertidores alimentados mediante fuentes de tensión. Para los convertidores resonantes con fuente de tensión, se han analizado muchas estrategias de control en la literatura, lo que hace hoy en día que esta sea una tecnología madura. El convertidor resonante con fuente de corriente es una solución alternativa, que ofrece ventajas conocidas como corriente de entrada no pulsante, baja tensión para interruptores, circuitos de conducción sencillos y capacidades de protección contra cortocircuitos. Sin embargo, existe una falta evidente de métodos de control aplicables a los convertidores resonantes con fuente de corriente. Además, otro desafío en este tema es la obtención de modelos dinámicos apropiados para el diseño del control. Por lo tanto, los objetivos de esta tesis se utilizan para llenar estos vacíos. Los esquemas de control propuestos son: - Esquema de control en frecuencia aplicado a un convertidor resonante paralelo con fuente de corriente para reguladores de tensión en continua - Esquema de control en modo de deslizamiento con modulación de amplitud aplicado a un convertidor resonante paralelo con fuente de corriente para reguladores de tensión en continua. - Esquema de control para un convertidor resonante paralelo con fuente de corriente para la regulación de tensión en continua de varias salidas. - Esquema de control sin comunicaciones para un sistema de transferencia de energía sin hilos con un transformador con entrehierro variable basado en un convertidor resonante con fuente de corriente.Postprint (published version