Support-reducing decomposition for FPGA mapping

Decomposition is a technology-independent process, in which a large complex function is broken into smaller, less complex functions. The costs of two-level or factored-form representations (cubes and literals) are used in most decomposition methods, as they have a high correlation with the area of cell-based designs. However, this correlation is weaker for field-programmable gate arrays (FPGAs) based on look-up tables. Furthermore, local optimizations have limited power due to the structural bias of the circuit descriptions. This paper tries to reduce the structural biasing by remapping the LUT network and decomposing the derived functions using the support as cost function. The proposed method improves the FPGA mapping results of a commercial tool for the 20 largest MCNC benchmarks, with gains of 28% in delay plus 18% in area when targeting delay, and a reduction of 28% in area plus 14% in delay with area as cost function. Results with 23% less area and 6% less delay are obtained after physical synthesis (post place-and-route). Moreover, 12 of the best known results for delay (and 3 for area) of the EPFL benchmarks are improved.Peer ReviewedPostprint (author's final draft

Scalable Synthesis and Verification: Towards Reliable Autonomy

We have seen the growing deployment of autonomous systems in our daily life, ranging from safety-critical self-driving cars to dialogue agents. While impactful and impressive, these systems do not often come with guarantees and are not rigorously evaluated for failure cases. This is in part due to the limited scalability of tools available for designing correct-by-construction systems, or verifying them posthoc. Another key limitation is the lack of availability of models for the complex environments with which autonomous systems often have to interact with. In the direction of overcoming these above mentioned bottlenecks to designing reliable autonomous systems, this thesis makes contributions along three fronts. First, we develop an approach for parallelized synthesis from linear-time temporal logic Specifications corresponding to the generalized reactivity (1) fragment. We begin by identifying a special case corresponding to singleton liveness goals that allows for a decomposition of the synthesis problem, which facilitates parallelized synthesis. Based on the intuition from this special case, we propose a more generalized approach for parallelized synthesis that relies on identifying equicontrollable states. Second, we consider learning-based approaches to enable verification at scale for complex systems, and for autonomous systems that interact with black-box environments. For the former, we propose a new abstraction refinement procedure based on machine learning to improve the performance of nonlinear constraint solving algorithms on large-scale problems. For the latter, we present a data-driven approach based on chance-constrained optimization that allows for a system to be evaluated for specification conformance without an accurate model of the environment. We demonstrate this approach on several tasks, including a lane-change scenario with real-world driving data. Lastly, we consider the problem of interpreting and verifying learning-based components such as neural networks. We introduce a new method based on Craig's interpolants for computing compact symbolic abstractions of pre-images for neural networks. Our approach relies on iteratively computing approximations that provably overapproximate and underapproximate the pre-images at all layers. Further, building on existing work for training neural networks for verifiability in the classification setting, we propose extensions that allow us to generalize the approach to more general architectures and temporal specifications.</p

Doctor of Philosophy

dissertationFormal verification of hardware designs has become an essential component of the overall system design flow. The designs are generally modeled as finite state machines, on which property and equivalence checking problems are solved for verification. Reachability analysis forms the core of these techniques. However, increasing size and complexity of the circuits causes the state explosion problem. Abstraction is the key to tackling the scalability challenges. This dissertation presents new techniques for word-level abstraction with applications in sequential design verification. By bundling together k bit-level state-variables into one word-level constraint expression, the state-space is construed as solutions (variety) to a set of polynomial constraints (ideal), modeled over the finite (Galois) field of 2^k elements. Subsequently, techniques from algebraic geometry -- notably, Groebner basis theory and technology -- are researched to perform reachability analysis and verification of sequential circuits. This approach adds a "word-level dimension" to state-space abstraction and verification to make the process more efficient. While algebraic geometry provides powerful abstraction and reasoning capabilities, the algorithms exhibit high computational complexity. In the dissertation, we show that by analyzing the constraints, it is possible to obtain more insights about the polynomial ideals, which can be exploited to overcome the complexity. Using our algorithm design and implementations, we demonstrate how to perform reachability analysis of finite-state machines purely at the word level. Using this concept, we perform scalable verification of sequential arithmetic circuits. As contemporary approaches make use of resolution proofs and unsatisfiable cores for state-space abstraction, we introduce the algebraic geometry analog of unsatisfiable cores, and present algorithms to extract and refine unsatisfiable cores of polynomial ideals. Experiments are performed to demonstrate the efficacy of our approaches

The Quantum Adiabatic Algorithm applied to random optimization problems: the quantum spin glass perspective

Among various algorithms designed to exploit the specific properties of quantum computers with respect to classical ones, the quantum adiabatic algorithm is a versatile proposition to find the minimal value of an arbitrary cost function (ground state energy). Random optimization problems provide a natural testbed to compare its efficiency with that of classical algorithms. These problems correspond to mean field spin glasses that have been extensively studied in the classical case. This paper reviews recent analytical works that extended these studies to incorporate the effect of quantum fluctuations, and presents also some original results in this direction.Comment: 151 pages, 21 figure

Proceedings of the Joint Automated Reasoning Workshop and Deduktionstreffen: As part of the Vienna Summer of Logic – IJCAR 23-24 July 2014

Preface For many years the British and the German automated reasoning communities have successfully run independent series of workshops for anybody working in the area of automated reasoning. Although open to the general public they addressed in the past primarily the British and the German communities, respectively. At the occasion of the Vienna Summer of Logic the two series have a joint event in Vienna as an IJCAR workshop. In the spirit of the two series there will be only informal proceedings with abstracts of the works presented. These are collected in this document. We have tried to maintain the informal open atmosphere of the two series and have welcomed in particular research students to present their work. We have solicited for all work related to automated reasoning and its applications with a particular interest in work-in-progress and the presentation of half-baked ideas. As in the previous years, we have aimed to bring together researchers from all areas of automated reasoning in order to foster links among researchers from various disciplines; among theoreticians, implementers and users alike, and among international communities, this year not just the British and German communities

Exploiting Satisfiability Solvers for Efficient Logic Synthesis

Logic synthesis is an important part of electronic design automation (EDA) flows, which enable the implementation of digital systems. As the design size and complexity increase, the data structures and algorithms for logic synthesis must adapt and improve in order to keep pace and to maintain acceptable runtime and high-quality results. Large circuits were often represented using binary decision diagrams (BDDs) that were rapidly adopted by logic synthesis tools beginning in the 1980s. Nowadays, BDD-based algorithms are still enhanced, but the possibilities for improvement are somewhat saturated after some 35 years of research. Alternatively, the first EDA applications that exploit Boolean satisfiability (SAT) were developed in the 1990s. Despite the worst-case exponential runtime of SAT solvers, rapid progress in their performance enabled the creation of efficient SAT-based algorithms. Yet, logic synthesis started using SAT solvers more diffusely only in the last decade. Therefore, thorough research is still required both for exploiting SAT solvers and for encoding logic synthesis problems into SAT. Our main goal in this thesis is to facilitate and promote the further integration of SAT solvers into EDA by proposing and evaluating novel SAT-based algorithms that can be used as building blocks in logic synthesis tools. First, we propose a rapid algorithm for LEXSAT, which generates satisfying assignments in lexicographic order. We show that LEXSAT can bring canonicity, which guarantees the generation of unique results, when using SAT solvers in EDA applications. Next, we present a new SAT-based algorithm that progressively generates irredundant sums of products (SOPs), which still play a crucial role in many logic synthesis tools. Using LEXSAT, for the first time, we can generate canonical SAT-based SOPs that, much like BDD-based SOPs, are unique for a given function and variable order but could relax canonicity in order to improve speed and scalability. Unlike BDDs, due to its progressive nature, our algorithm can generate partial SOPs for applications that can work with incomplete circuit functionality. It is noteworthy that both LEXSAT and the SAT-based SOPs are applicable beyond logic synthesis and EDA. Finally, we focus on resubstitution, which reimplements a given Boolean function as a new function that depends on a set of existing functions called divisors. We propose the carving interpolation algorithm that, unlike the traditional Craig interpolation, forces the use of a specific divisor as an input of the new function. This is particularly useful for global circuit restructuring and for some synthesis-based engineering change order (ECO) algorithms. Furthermore, we compare two existing SAT-based methodologies for resubstitution, which are used for post-mapping logic optimisation. The first methodology combines SAT-based functional dependency checking and Craig interpolation that are also used for our carving interpolation; the second methodology is based on cube enumeration and is similar to the SAT-based SOP generation. The initial implementations of our novel SAT-based algorithms offer either better performance or new features, or both, compared to their state-of-the-art versions. As the results indicate, a further thorough development of SAT-based algorithms for logic synthesis, like the one performed for BDDs in the past, can help overcome existing limitations and keep up with growing designs and design complexity

Tools and Algorithms for the Construction and Analysis of Systems

This open access book constitutes the proceedings of the 28th International Conference on Tools and Algorithms for the Construction and Analysis of Systems, TACAS 2022, which was held during April 2-7, 2022, in Munich, Germany, as part of the European Joint Conferences on Theory and Practice of Software, ETAPS 2022. The 46 full papers and 4 short papers presented in this volume were carefully reviewed and selected from 159 submissions. The proceedings also contain 16 tool papers of the affiliated competition SV-Comp and 1 paper consisting of the competition report. TACAS is a forum for researchers, developers, and users interested in rigorously based tools and algorithms for the construction and analysis of systems. The conference aims to bridge the gaps between different communities with this common interest and to support them in their quest to improve the utility, reliability, exibility, and efficiency of tools and algorithms for building computer-controlled systems

Tools and Algorithms for the Construction and Analysis of Systems

This open access book constitutes the proceedings of the 28th International Conference on Tools and Algorithms for the Construction and Analysis of Systems, TACAS 2022, which was held during April 2-7, 2022, in Munich, Germany, as part of the European Joint Conferences on Theory and Practice of Software, ETAPS 2022. The 46 full papers and 4 short papers presented in this volume were carefully reviewed and selected from 159 submissions. The proceedings also contain 16 tool papers of the affiliated competition SV-Comp and 1 paper consisting of the competition report. TACAS is a forum for researchers, developers, and users interested in rigorously based tools and algorithms for the construction and analysis of systems. The conference aims to bridge the gaps between different communities with this common interest and to support them in their quest to improve the utility, reliability, exibility, and efficiency of tools and algorithms for building computer-controlled systems

A proof of convergence of a finite volume scheme for modified steady Richards’ equation describing transport processes in the pressing section of a paper machine

A number of water flow problems in porous media are modelled by Richards’ equation [1]. There exist a lot of different applications of this model. We are concerned with the simulation of the pressing section of a paper machine. This part of the industrial process provides the dewatering of the paper layer by the use of clothings, i.e. press felts, which absorb the water during pressing [2]. A system of nips are formed in the simplest case by rolls, which increase sheet dryness by pressing against each other (see Figure 1). A lot of theoretical studies were done for Richards’ equation (see [3], [4] and references therein). Most articles consider the case of x-independent coefficients. This simplifies the system considerably since, after Kirchhoff’s transformation of the problem, the elliptic operator becomes linear. In our case this condition is not satisfied and we have to consider nonlinear operator of second order. Moreover, all these articles are concerned with the nonstationary problem, while we are interested in the stationary case. Due to complexity of the physical process our problem has a specific feature. An additional convective term appears in our model because the porous media moves with the constant velocity through the pressing rolls. This term is zero in immobile porous media. We are not aware of papers, which deal with such kind of modified steady Richards’ problem. The goal of this paper is to obtain the stability results, to show the existence of a solution to the discrete problem, to prove the convergence of the approximate solution to the weak solution of the modified steady Richards’ equation, which describes the transport processes in the pressing section. In Section 2 we present the model which we consider. In Section 3 a numerical scheme obtained by the finite volume method is given. The main part of this paper is theoretical studies, which are given in Section 4. Section 5 presents a numerical experiment. The conclusion of this work is given in Section 6