Experimental analysis of dense multipath components in an industrial environment

This work presents an analysis of dense multipath components (DMC) in an industrial workshop. Radio channel sounding was performed with a vector network analyzer and virtual antenna arrays. The specular and dense multipath components were estimated with the RiMAX algorithm. The DMC covariance structure of the RiMAX data model was validated. Two DMC parameters were studied: the distribution of radio channel power between specular and dense multipath, and the DMC reverberation time. The DMC power accounted for 23% to 70% of the total channel power. A significant difference between DMC powers in line-of-sight and nonline-of-sight was observed, which can be largely attributed to the power of the line-of-sight multipath component. In agreement with room electromagnetics theory, the DMC reverberation time was found to be nearly constant. Overall, DMC in the industrial workshop is more important than in office environments: it occupies a fraction of the total channel power that is 4% to 13% larger. The industrial environment absorbs on average 29% of the electromagnetic energy compared to 45%-51% for office environments in literature: this results in a larger reverberation time in the former environment. These findings are explained by the highly cluttered and metallic nature of the workshop

A Study of Differences in Calculated Capacity when Using Single-, Mixed- or Multiple-Bounce GSCM Schemes

The paper looks for differences in MIMO system capacity when using either single-, mixed-, or multiple-bounce geometry based stochastic channel models (GSCMs). The investigation considers Saleh-Valenzuela temporal indoor model, expanded for angular domain. In the model omnidirectional and idealized sector antennas were used as array elements. The single-bounce assumption, combination of single and multiple bounces, and pure random multiple bounces assumption were compared within “temporally identical” environment regarding the overall MIMO capacity. Assumption of clustered scatterers/reflectors is used in all three cases. The comparison is performed in statistical sense, using a large number of stochastically generated temporal models. The model is two- dimensional, i.e. neither elevation angle nor polarization/ depolarization was considered

On the Outage Capacity of Correlated Multiple-Path MIMO Channels

The use of multi-antenna arrays in both transmission and reception has been shown to dramatically increase the throughput of wireless communication systems. As a result there has been considerable interest in characterizing the ergodic average of the mutual information for realistic correlated channels. Here, an approach is presented that provides analytic expressions not only for the average, but also the higher cumulant moments of the distribution of the mutual information for zero-mean Gaussian (multiple-input multiple-output) MIMO channels with the most general multipath covariance matrices when the channel is known at the receiver. These channels include multi-tap delay paths, as well as general channels with covariance matrices that cannot be written as a Kronecker product, such as dual-polarized antenna arrays with general correlations at both transmitter and receiver ends. The mathematical methods are formally valid for large antenna numbers, in which limit it is shown that all higher cumulant moments of the distribution, other than the first two scale to zero. Thus, it is confirmed that the distribution of the mutual information tends to a Gaussian, which enables one to calculate the outage capacity. These results are quite accurate even in the case of a few antennas, which makes this approach applicable to realistic situations.Comment: submitted for publication IEEE Trans. Information Theory; IEEEtran documentstyl

Analysis of Channel Measurements Using a Very Large Antenna Array

Accurate wireless channel models are crucial to simulate the effect of radio wave propagation in a channel on wireless communication systems. By calculating physical processing effects that signal undergoes while traveling from transmitter to the receiver, channel models help to analyze performance of wireless systems. State of the art channel model such as WINNER and COST 2100 are able to model the characteristics of conventional MIMO (Multiple-Input Multiple-Output) systems (where moderate number of antennas is used at the two sides of the link) with sufficient accuracy. However, model extensions are needed for the current models in order to be able to capture new propagation characteristics result from having massive number of antenna elements at one or both ends of the communication link. In this thesis work, a measurement campaign is performed using very large antenna array (about 7.5m long) in order to study key propagation characteristics for massive MIMO. The channel measurements are performed using two frequency bands (2.6 GHz and 5.1 GHz), vertical and horizontal antenna polarizations, directional and omni-directional antennas. Effect of aforementioned setup parameters on cluster delay and angle spreads, power slope and shadowing, number of clusters and their observation lengths are studied in this work. Also correlation among estimated cluster parameters is presented. It was observed, that antenna polarization does not have significant effect on estimated cluster parameters. On the other hand, some estimated parameters like delay and angle spread, shadowing achieve higher values using 2.6 GHz band. Impact of antenna directivity was not very significant. Results of this thesis work are important while implementing extension for cluster-based COST 2100 channel model for massive MIMO case

Array Configuration Effect on the Spatial Correlation of MU-MIMO Channels in NLoS Environments

In this paper, three different base-station antenna (BSA) configurations are compared in terms of inter-user spatial correlation in a two dimensional (2D) non-line-of-sight (NLoS) environment. The three configurations are: (i) a regular uniform linear array (ULA); (ii) a periodic sparse array; and (iii) an aperiodic sparse array. Electromagnetic modeling of the NLoS channel is proposed where scatterers are considered as resonant dipoles confined in clusters of scatterers (CoSs). While the probability of facing highly correlated user-equipments (UEs) in a multi-user multiple-input multiple-output (MU-MIMO) system is decreasing as the richness of mutipath increases, the sparsity (increased inter-element spacing) is seen to be capable of reducing this probability as well. This is due to the larger spatial variations experienced by the sparse array. Moreover, the results show that further improvement can be achieved by deploying an aperiodic distribution of antenna elements into the sparse antenna aperture

Evaluation of performance of mobile terminal antennas

Fast development of new mobile communications equipment results in demand for fast and reliable evaluation methods to estimate the performance of mobile terminals because the performance of antennas located on the terminals varies in different multipath propagation environments. Two methods presented in this thesis provide new possibilities in antenna design because, from now on, the performance of new antennas can be tested already before a prototype antenna is constructed by using existing radio channel libraries and simulated radiation patterns of the antennas. The performance can be estimated by calculating the mean effective gain (MEG) of the antenna using the elevation power distribution or by a plane wave -based method using sets of incident plane waves and the radiation pattern of an antenna. In addition to different propagation environments, the effects of the user on performance can be included in the evaluation. In this thesis, estimating the MEG of different antennas using the elevation power distribution and the power patterns of the antennas is shown to be an accurate and fast method by comparing the results with direct radio channel measurements. The mean difference between the methods is −0.18 dB with standard deviation of 0.19 dB. The usefulness of the evaluation method is demonstrated by evaluating the performance of several antennas located on mobile terminals. The antenna evaluation provided important and unique knowledge of the effect of both the environment and the user on performance. Because in calculating the radiation efficiency of the antenna we assume uniform incident field, the efficiency can result in a performance estimation that does not correspond to real usage situations. Therefore, including the environmental effects in the evaluation procedure is important, although the effect of the antenna is more important than the effect of the environment on MEG. It was noticed with calculated Gaussian-shaped beams that tilting or changing the beamwidth of a mobile terminal antenna has an effect of about 2 dB on MEG in multipath environments. Matching the polarization of the antenna to that of the environment can improve the performance more. A novel incident plane wave -based tool has been developed for evaluating the performance of antenna configurations designed for diversity and Multiple-Input Multiple-Output (MIMO) systems. In this thesis, the instantaneous joint contribution of incident field consisting of a number of extracted plane waves and the complex three-dimensional radiation pattern of the antenna is shown to be accurate and extremely fast way to estimate the diversity advantages of different antenna configurations in time-variable radio channels. The difference between the diversity gains achieved by the plane wave -based method and by the direct radio channel measurements is on average less than 0.9 dB. Moreover, the radio channel can be exactly the same for all antenna configurations under test. Furthermore, this thesis includes evaluation of the performance of different MIMO antenna configurations. The studied antenna configurations have been selected from the 16×64 MIMO channel measurement data. A novel way of using one omnidirectional reference antenna in a normalization procedure is shown to be reasonable especially in cases of antenna arrays consisting of directive elements. Three different propagation environments are used as evaluation platforms. The azimuth orientation of mobile terminal antennas may influence the performance of a MIMO antenna configuration significantly. In MIMO configurations compact dual-polarized receiving antennas provide capacity performance almost equal to the arrays employing single polarization.reviewe

Indoor wireless communications and applications

Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter