29,605 research outputs found
Recommended from our members
Two novel nonlinear companding schemes with iterative receiver to reduce PAPR in multi-carrier modulation systems
Companding transform is an efficient and simple method to reduce the Peak-to-Average Power Ratio (PAPR) for Multi-Carrier Modulation (MCM) systems. But if the MCM signal is only simply operated by inverse companding transform at the receiver, the resultant spectrum may exhibit severe in-band and out-of-band radiation of the distortion components, and considerable peak regrowth by excessive channel noises etc. In order to prevent these problems from occurring, in this paper, two novel nonlinear companding schemes with a iterative receiver are proposed to reduce the PAPR. By transforming the amplitude or power of the original MCM signals into uniform distributed signals, the novel schemes can effectively reduce PAPR for different modulation formats and sub-carrier sizes. Despite moderate complexity increasing at the receiver, but it is especially suitable to be combined with iterative channel estimation. Computer simulation results show that the proposed schemes can offer good system performances without any bandwidth expansion
A study and experiment plan for digital mobile communication via satellite
The viability of mobile communications is examined within the context of a frequency division multiple access, single channel per carrier satellite system emphasizing digital techniques to serve a large population of users. The intent is to provide the mobile users with a grade of service consistant with the requirements for remote, rural (perhaps emergency) voice communications, but which approaches toll quality speech. A traffic model is derived on which to base the determination of the required maximum number of satellite channels to provide the anticipated level of service. Various voice digitalization and digital modulation schemes are reviewed along with a general link analysis of the mobile system. Demand assignment multiple access considerations and analysis tradeoffs are presented. Finally, a completed configuration is described
Recommended from our members
Noise shaping Asynchronous SAR ADC based time to digital converter
Time-to-digital converters (TDCs) are key elements for the digitization of timing information in modern mixed-signal circuits such as digital PLLs, DLLs, ADCs, and on-chip jitter-monitoring circuits. Especially, high-resolution TDCs are increasingly employed in on-chip timing tests, such as jitter and clock skew measurements, as advanced fabrication technologies allow fine on-chip time resolutions. Its main purpose is to quantize the time interval of a pulse signal or the time interval between the rising edges of two clock signals. Similarly to ADCs, the performance of TDCs are also primarily characterized by Resolution, Sampling Rate, FOM, SNDR, Dynamic Range and DNL/INL. This work proposes and demonstrates 2nd order noise shaping Asynchronous SAR ADC based TDC architecture with highest resolution of 0.25 ps among current state of art designs with respect to post-layout simulation results. This circuit is a combination of low power/High Resolution 2nd Order Noise Shaped Asynchronous SAR ADC backend with simple Time to Amplitude converter (TAC) front-end and is implemented in 40nm CMOS technology. Additionally, special emphasis is given on the discussion on various current state of art TDC architectures.Electrical and Computer Engineerin
emiT: an apparatus to test time reversal invariance in polarized neutron decay
We describe an apparatus used to measure the triple-correlation term (\D
\hat{\sigma}_n\cdot p_e\times p_\nu) in the beta-decay of polarized neutrons.
The \D-coefficient is sensitive to possible violations of time reversal
invariance. The detector has an octagonal symmetry that optimizes
electron-proton coincidence rates and reduces systematic effects. A beam of
longitudinally polarized cold neutrons passes through the detector chamber,
where a small fraction beta-decay. The final-state protons are accelerated and
focused onto arrays of cooled semiconductor diodes, while the coincident
electrons are detected using panels of plastic scintillator. Details regarding
the design and performance of the proton detectors, beta detectors and the
electronics used in the data collection system are presented. The neutron beam
characteristics, the spin-transport magnetic fields, and polarization
measurements are also described.Comment: 15 pages, 13 figure
A space communications study Final report, 15 Sep. 1966 - 15 Sep. 1967
Investigation of signal to noise ratios and signal transmission efficiency for space communication system
Output Filter Aware Optimization of the Noise Shaping Properties of {\Delta}{\Sigma} Modulators via Semi-Definite Programming
The Noise Transfer Function (NTF) of {\Delta}{\Sigma} modulators is typically
designed after the features of the input signal. We suggest that in many
applications, and notably those involving D/D and D/A conversion or actuation,
the NTF should instead be shaped after the properties of the
output/reconstruction filter. To this aim, we propose a framework for optimal
design based on the Kalman-Yakubovich-Popov (KYP) lemma and semi-definite
programming. Some examples illustrate how in practical cases the proposed
strategy can outperform more standard approaches.Comment: 14 pages, 18 figures, journal. Code accompanying the paper is
available at http://pydsm.googlecode.co
Conceptual mechanization studies for a horizon definition spacecraft communications and data handling subsystem
Conceptual mechanization for horizon definition spacecraft communications and data handling subsyste
Study of radar pulse compression for high resolution satellite altimetry
Pulse compression techniques are studied which are applicable to a satellite altimeter having a topographic resolution of + 10 cm. A systematic design procedure is used to determine the system parameters. The performance of an optimum, maximum likelihood processor is analysed, which provides the basis for modifying the standard split-gate tracker to achieve improved performance. Bandwidth considerations lead to the recommendation of a full deramp STRETCH pulse compression technique followed by an analog filter bank to separate range returns. The implementation of the recommended technique is examined
- …