A multipath routing method for tolerating permanent and non-permanent faults

The intensive and continuous use of high-performance computers for executing computationally intensive applications, coupled with the large number of elements that make them up, dramatically increase the likelihood of failures during their operation. The interconnection network is a critical part of such systems, therefore, network faults have an extremely high impact because most routing algorithms are not designed to tolerate faults. In such algorithms, just a single fault may stall messages in the network, preventing the finalization of applications, or may lead to deadlocked confi gurations. This work focuses on the problem of fault tolerance for high-speed interconnection networks by designing a fault-tolerant routing method to solve an unbounded number of dynamic faults (permanent and non- permanent). To accomplish this task we take advantage of the communication path redundancy, by means of a multipath routing approach. Experiments show that our method allows applications to finalize their execution in the presence of several number of faults, with an average performance value of 97% compared to the fault-free scenarios.Presentado en el IX Workshop Procesamiento Distribuido y Paralelo (WPDP)Red de Universidades con Carreras en Informática (RedUNCI

Predictive and distributed routing balancing (PR-DRB) : high speed interconnection networks

Current parallel applications running on clusters require the use of an interconnection network to perform communications among all computing nodes available. Imbalance of communications can produce network congestion, reducing throughput and increasing latency, degrading the overall system performance. On the other hand, parallel applications running on these networks posses representative stages which allow their characterization, as well as repetitive behavior that can be identified on the basis of this characterization. This work presents the Predictive and Distributed Routing Balancing (PR-DRB), a new method developed to gradually control network congestion, based on paths expansion, traffic distribution and effective traffic load, in order to maintain low latency values. PR-DRB monitors messages latencies on intermediate routers, makes decisions about alternative paths and record communication pattern information encountered during congestion situation. Based on the concept of applications repetitiveness, best solution recorded are reapplied when saved communication pattern re-appears. Traffic congestion experiments were conducted in order to evaluate the performance of the method, and improvements were observed.Les aplicacions paral·leles actuals en els Clústers requereixen l'ús d'una xarxa d'interconnexió per comunicar a tots els nodes de còmput disponibles. El desequilibri en la càrrega de comunicacions pot congestionar la xarxa, incrementant la latència i disminuint el throughput, degradant el rendiment total del sistema. D'altra banda, les aplicacions paral·leles que s'executen sobre aquestes xarxes contenen etapes representatives durant la seva execució les quals permeten caracteritzar-les, a més d'extraure un comportament repetitiu que pot ser identificat en base a aquesta caracterització. Aquest treball presenta el Balanceig Predictiu de Encaminament Distribuït (PR-DRB), un nou mètode desenvolupat per controlar la congestió a la xarxa en forma gradual, basat en l'expansió de camins, la distribució de trànsit i càrrega efectiva actual per tal de mantenir una latència baixa. PR-DRB monitoritza la latència dels missatges en els encaminadors, pren decisions sobre els camins alternatius a utilitzar i registra la informació de la congestió sobre la base del patró de comunicacions detectat, utilitzant com a concepte base la repetitivitat de les aplicacions per després tornar a aplicar la millor solució quan aquest patró es repeteixi. Experiments de trànsit amb congestió van ser portats a terme per avaluar el rendiment del mètode, els quals van mostrar la bondat del mateix.Las aplicaciones paralelas actuales en los Clústeres requieren el uso de una red de interconexión para comunicar a todos los nodos de cómputo disponibles. El desbalance en la carga de comunicaciones puede congestionar la red, incrementando la latencia y disminuyendo el throughput, degradando el rendimiento total del sistema. Por otro lado, las aplicaciones paralelas que corren sobre estas redes contienen etapas representativas durante su ejecución las cuales permiten caracterizarlas, además de un comportamiento repetitivo que puede ser identificado en base a dicha caracterización. Este trabajo presenta el Balanceo Predictivo de Encaminamiento Distribuido (PR-DRB), un nuevo método desarrollado para controlar la congestión en la red en forma gradual; basado en la expansión de caminos, la distribución de tráfico y carga efectiva actual, a fin de mantener una latencia baja. PR-DRB monitorea la latencia de los mensajes en los encaminadores, toma decisiones sobre los caminos alternativos a utilizar y registra la información de la congestión en base al patrón de comunicaciones detectado, usando como concepto base la repetitividad de las aplicaciones para luego volver a aplicar la mejor solución cuando dicho patrón se repita. Experimentos de tráfico con congestión fueron llevados a cabo para evaluar el rendimiento del método, los cuales mostraron la bondad del mismo

A study on stryi-icnos potatorum and pisum sativum as natural coagulants for meat food processing wastewater

Slow maintained load test is widely used by contractors in Malaysia to ensure the driven pile could accommodate the design load of the structure. Slow maintained load test is a test to determine load-settlement curve and pile capacity for a period of time using conventional load test. Conventional static pile load test equipment is large in size thus making it heavier and takes a long time to install. In addition, it consumes a lot of space which causes congestion at construction sites. Therefore, the objective of this thesis is to conduct a conventional load test by replacing the pile kentledge load with anchorage and reaction pile. Preparations of ten designs comprising six commercial designs were reviewed. In addition, four proposed designs were suggested for the setup. Final design was produced based on its safety factors and criteria referred via literature review. The test frame consists of reaction frame with four reaction helical pile with two helixes per reaction pile. The deformation shapes, safety factor, stress, and strain of the design and finite element of the model has been analysed with the use of SolidWorks and Pia.xis 30 software. SolidWorks software emphasizes on the model load-deflection relationship while Plaxis 30 ensures a correlation of reaction between pile uplift force and soil. Then, the model was tested on site to determine the relationship between physical load­deflection and pile-soil uplift force. The results of uplift force and displacement for numerical and physical test were nearly identical which increment of load­displacement graph pattern. The higher the uplift force, the higher the displacement obtained. In conclusion, the result obtained and the design may be considered as a guideline for future application of sustainable slow maintained pile load test

NoCo: ILP-based worst-case contention estimation for mesh real-time manycores

Manycores are capable of providing the computational demands required by functionally-advanced critical applications in domains such as automotive and avionics. In manycores a network-on-chip (NoC) provides access to shared caches and memories and hence concentrates most of the contention that tasks suffer, with effects on the worst-case contention delay (WCD) of packets and tasks' WCET. While several proposals minimize the impact of individual NoC parameters on WCD, e.g. mapping and routing, there are strong dependences among these NoC parameters. Hence, finding the optimal NoC configurations requires optimizing all parameters simultaneously, which represents a multidimensional optimization problem. In this paper we propose NoCo, a novel approach that combines ILP and stochastic optimization to find NoC configurations in terms of packet routing, application mapping, and arbitration weight allocation. Our results show that NoCo improves other techniques that optimize a subset of NoC parameters.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2015- 65316-P and the HiPEAC Network of Excellence. It also received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (agreement No. 772773). Carles Hernández is jointly supported by the MINECO and FEDER funds through grant TIN2014-60404-JIN. Jaume Abella has been partially supported by the Spanish Ministry of Economy and Competitiveness under Ramon y Cajal postdoctoral fellowship number RYC-2013-14717. Enrico Mezzetti has been partially supported by the Spanish Ministry of Economy and Competitiveness under Juan de la Cierva-Incorporaci´on postdoctoral fellowship number IJCI-2016-27396.Peer ReviewedPostprint (author's final draft

Proceedings of the 3rd Workshop on Domain-Specific Language Design and Implementation (DSLDI 2015)

The goal of the DSLDI workshop is to bring together researchers and practitioners interested in sharing ideas on how DSLs should be designed, implemented, supported by tools, and applied in realistic application contexts. We are both interested in discovering how already known domains such as graph processing or machine learning can be best supported by DSLs, but also in exploring new domains that could be targeted by DSLs. More generally, we are interested in building a community that can drive forward the development of modern DSLs. These informal post-proceedings contain the submitted talk abstracts to the 3rd DSLDI workshop (DSLDI'15), and a summary of the panel discussion on Language Composition

CliqueStream: an efficient and fault-resilient live streaming network on a clustered peer-to-peer overlay

Several overlay-based live multimedia streaming platforms have been proposed in the recent peer-to-peer streaming literature. In most of the cases, the overlay neighbors are chosen randomly for robustness of the overlay. However, this causes nodes that are distant in terms of proximity in the underlying physical network to become neighbors, and thus data travels unnecessary distances before reaching the destination. For efficiency of bulk data transmission like multimedia streaming, the overlay neighborhood should resemble the proximity in the underlying network. In this paper, we exploit the proximity and redundancy properties of a recently proposed clique-based clustered overlay network, named eQuus, to build efficient as well as robust overlays for multimedia stream dissemination. To combine the efficiency of content pushing over tree structured overlays and the robustness of data-driven mesh overlays, higher capacity stable nodes are organized in tree structure to carry the long haul traffic and less stable nodes with intermittent presence are organized in localized meshes. The overlay construction and fault-recovery procedures are explained in details. Simulation study demonstrates the good locality properties of the platform. The outage time and control overhead induced by the failure recovery mechanism are minimal as demonstrated by the analysis.Comment: 10 page

Packet Switched vs. Time Multiplexed FPGA Overlay Networks

Dedicated, spatially configured FPGA interconnect is efficient for applications that require high throughput connections between processing elements (PEs) but with a limited degree of PE interconnectivity (e.g. wiring up gates and datapaths). Applications which virtualize PEs may require a large number of distinct PE-to-PE connections (e.g. using one PE to simulate 100s of operators, each requiring input data from thousands of other operators), but with each connection having low throughput compared with the PE’s operating cycle time. In these highly interconnected conditions, dedicating spatial interconnect resources for all possible connections is costly and inefficient. Alternatively, we can time share physical network resources by virtualizing interconnect links, either by statically scheduling the sharing of resources prior to runtime or by dynamically negotiating resources at runtime. We explore the tradeoffs (e.g. area, route latency, route quality) between time-multiplexed and packet-switched networks overlayed on top of commodity FPGAs. We demonstrate modular and scalable networks which operate on a Xilinx XC2V6000-4 at 166MHz. For our applications, time-multiplexed, offline scheduling offers up to a 63% performance increase over online, packet-switched scheduling for equivalent topologies. When applying designs to equivalent area, packet-switching is up to 2× faster for small area designs while time-multiplexing is up to 5× faster for larger area designs. When limited to the capacity of a XC2V6000, if all communication is known, time-multiplexed routing outperforms packet-switching; however when the active set of links drops below 40% of the potential links, packet-switched routing can outperform time-multiplexing

Application-Aware Deadlock-Free Oblivious Routing

Conventional oblivious routing algorithms are either not application-aware or assume that each flow has its own private channel to ensure deadlock avoidance. We present a framework for application-aware routing that assures deadlock-freedom under one or more channels by forcing routes to conform to an acyclic channel dependence graph. Arbitrary minimal routes can be made deadlock-free through appropriate static channel allocation when two or more channels are available. Given bandwidth estimates for flows, we present a mixed integer-linear programming (MILP) approach and a heuristic approach for producing deadlock-free routes that minimize maximum channel load. The heuristic algorithm is calibrated using the MILP algorithm and evaluated on a number of benchmarks through detailed network simulation. Our framework can be used to produce application-aware routes that target the minimization of latency, number of flows through a link, bandwidth, or any combination thereof

Application-Aware Deadlock-Free Oblivious Routing

Conventional oblivious routing algorithms are either not application-aware or assume that each flow has its own private channel to ensure deadlock avoidance. We present a framework for application-aware routing that assures deadlock-freedom under one or more channels by forcing routes to conform to an acyclic channel dependence graph. Arbitrary minimal routes can be made deadlock-free through appropriate static channel allocation when two or more channels are available. Given bandwidth estimates for flows, we present a mixed integer-linear programming (MILP) approach and a heuristic approach for producing deadlock-free routes that minimize maximum channel load. The heuristic algorithm is calibrated using the MILP algorithm and evaluated on a number of benchmarks through detailed network simulation. Our framework can be used to produce application-aware routes that target the minimization of latency, number of flows through a link, bandwidth, or any combination thereof