The 74MHz System on the Very Large Array

The Naval Research Laboratory and the National Radio Astronomy Observatory completed implementation of a low frequency capability on the VLA at 73.8 MHz in 1998. This frequency band offers unprecedented sensitivity (~25 mJy/beam) and resolution (~25 arcsec) for low-frequency observations. We review the hardware, the calibration and imaging strategies, comparing them to those at higher frequencies, including aspects of interference excision and wide-field imaging. Ionospheric phase fluctuations pose the major difficulty in calibrating the array. Over restricted fields of view or at times of extremely quiescent ionospheric ``weather'', an angle-invariant calibration strategy can be used. In this approach a single phase correction is devised for each antenna, typically via self-calibration. Over larger fields of view or at times of more normal ionospheric ``weather'' when the ionospheric isoplanatic patch size is smaller than the field of view, we adopt a field-based strategy in which the phase correction depends upon location within the field of view. This second calibration strategy was implemented by modeling the ionosphere above the array using Zernike polynomials. Images of 3C sources of moderate strength are provided as examples of routine, angle-invariant calibration and imaging. Flux density measurements indicate that the 74 MHz flux scale at the VLA is stable to a few percent, and tied to the Baars et al. value of Cygnus A at the 5 percent level. We also present an example of a wide-field image, devoid of bright objects and containing hundreds of weaker sources, constructed from the field-based calibration. We close with a summary of lessons the 74 MHz system offers as a model for new and developing low-frequency telescopes. (Abridged)Comment: 73 pages, 46 jpeg figures, to appear in ApJ

A time-delay determination from VLA light curves of the CLASS gravitational lens B1600+434

We present Very Large Array (VLA) 8.5-GHz light curves of the two lens images of the Cosmic Lens All Sky Survey (CLASS) gravitational lens B1600+434. We find a nearly linear decrease of 18-19% in the flux densities of both lens images over a period of eight months (February-October) in 1998. Additionally, the brightest image A shows modulations up to 11% peak-to-peak on scales of days to weeks over a large part of the observing period. Image B varies significantly less on this time scale. We conclude that most of the short-term variability in image A is not intrinsic source variability, but is most likely caused by microlensing in the lens galaxy. The alternative, scintillation by the ionized Galactic ISM, is shown to be implausible based on its strong opposite frequency dependent behavior compared with results from multi-frequency WSRT monitoring observations (Koopmans & de Bruyn 1999). From these VLA light curves we determine a median time delay between the lens images of 47^{+5}_{-6} d (68%) or 47^{+12}_{-9} d (95%). We use two different methods to derive the time delay; both give the same result within the errors. We estimate an additional systematic error between -8 and +7 d. If the mass distribution of lens galaxy can be described by an isothermal model (Koopmans, de Bruyn & Jackson 1998), this time delay would give a value for the Hubble parameter, H_0=57^{+14}_{-11} (95% statistical) ^{+26}_{-15} (systematic) km/s/Mpc (Omega_m=1 and Omega_Lambda=0). Similarly, the Modified-Hubble-Profile mass model would give H_0=74^{+18}_{-15} (95% statistical) ^{+22}_{-22} (systematic) km/s/Mpc. For Omega_m=0.3 and Omega_Lambda=0.7, these values increase by 5.4%. ... (ABRIDGED)Comment: 14 pages, 6 figures, accepted for publication in Astronomy & Astrophysics (Figs 1 and 3 with degraded resolution

Precision Calibration of Radio Interferometers Using Redundant Baselines

Growing interest in 21 cm tomography has led to the design and construction of broadband radio interferometers with low noise, moderate angular resolution, high spectral resolution, and wide fields of view. With characteristics somewhat different from traditional radio instruments, these interferometers may require new calibration techniques in order to reach their design sensitivities. Self-calibration or redundant calibration techniques that allow an instrument to be calibrated off complicated sky emission structures are ideal. In particular, the large number of redundant baselines possessed by these new instruments makes redundant calibration an especially attractive option. In this paper, we explore the errors and biases in existing redundant calibration schemes through simulations, and show how statistical biases can be eliminated. We also develop a general calibration formalism that includes both redundant baseline methods and basic point source calibration methods as special cases, and show how slight deviations from perfect redundancy and coplanarity can be taken into account.Comment: 18 pages, 13 figures; Replaced to match accepted MNRAS versio

An Overview of the 2014 ALMA Long Baseline Campaign

A major goal of the Atacama Large Millimeter/submillimeter Array (ALMA) is to make accurate images with resolutions of tens of milliarcseconds, which at submillimeter (submm) wavelengths requires baselines up to ~15 km. To develop and test this capability, a Long Baseline Campaign (LBC) was carried out from September to late November 2014, culminating in end-to-end observations, calibrations, and imaging of selected Science Verification (SV) targets. This paper presents an overview of the campaign and its main results, including an investigation of the short-term coherence properties and systematic phase errors over the long baselines at the ALMA site, a summary of the SV targets and observations, and recommendations for science observing strategies at long baselines. Deep ALMA images of the quasar 3C138 at 97 and 241 GHz are also compared to VLA 43 GHz results, demonstrating an agreement at a level of a few percent. As a result of the extensive program of LBC testing, the highly successful SV imaging at long baselines achieved angular resolutions as fine as 19 mas at ~350 GHz. Observing with ALMA on baselines of up to 15 km is now possible, and opens up new parameter space for submm astronomy.Comment: 11 pages, 7 figures, 2 tables; accepted for publication in the Astrophysical Journal Letters; this version with small changes to affiliation

The Variability of Sagittarius A* at Centimeter Wavelengths

We present the results of a 3.3-year project to monitor the flux density of Sagittarius A* at 2.0, 1.3, and 0.7 cm with the VLA. The fully calibrated light curves for Sgr A* at all three wavelengths are presented. Typical errors in the flux density are 6.1%, 6.2%, and 9.2% at 2.0, 1.3, and 0.7 cm, respectively. There is preliminary evidence for a bimodal distribution of flux densities, which may indicate the existence of two distinct states of accretion onto the supermassive black hole. At 1.3 and 0.7 cm, there is a tail in the distribution towards high flux densities. Significant variability is detected at all three wavelengths, with the largest amplitude variations occurring at 0.7 cm. The rms deviation of the flux density of Sgr A* is 0.13, 0.16, and 0.21 Jy at 2.0, 1.3, and 0.7 cm, respectively. During much of this monitoring campaign, Sgr A* appeared to be relatively quiescent compared to results from previous campaigns. At no point during the monitoring campaign did the flux density of Sgr A* more than double its mean value. The mean spectral index of Sgr A* is alpha=0.20+/-0.01, with a standard deviation of 0.14. The spectral index appears to depend linearly on the observed flux density at 0.7 cm with a steeper index observed during outbursts. This correlation is consistent with the expectation for outbursts that are self-absorbed at wavelengths of 0.7 cm or longer and inconsistent with the effects of simple models for interstellar scintillation. Much of the variability of Sgr A*, including possible time lags between flux density changes at the different wavelengths, appears to occur on time scales less than the time resolution of our observations (8 days). Future observations should focus on the evolution of the flux density on these time scales.Comment: 16 pages, 10 figures, accepted for publication in A

Precision Southern Hemisphere pulsar VLBI astrometry: techniques and results for PSR J1559-4438

We describe a data reduction pipeline for VLBI astrometric observations of pulsars, implemented using the ParselTongue AIPS interface. The pipeline performs calibration (including ionosphere modeling), phase referencing with proper accounting of reference source structure, amplitude corrections for pulsar scintillation, and position fitting to yield the position, proper motion and parallax. The optimal data weighting scheme to minimize the total error budget of a parallax fit, and how this scheme varies with pulsar parameters such as flux density, is also investigated. The robustness of the techniques employed are demonstrated with the presentation of the first results from a two year astrometry program using the Australian Long Baseline Array (LBA). The parallax of PSR J1559-4438 is determined to be 0.384 +- 0.081 mas (1 sigma), resulting in a distance estimate of 2600 pc which is consistent with earlier DM and HI absorption estimates.Comment: 30 pages, 8 figures, submitted to Ap

Multisource Self-calibration for Sensor Arrays

Calibration of a sensor array is more involved if the antennas have direction dependent gains and multiple calibrator sources are simultaneously present. We study this case for a sensor array with arbitrary geometry but identical elements, i.e. elements with the same direction dependent gain pattern. A weighted alternating least squares (WALS) algorithm is derived that iteratively solves for the direction independent complex gains of the array elements, their noise powers and their gains in the direction of the calibrator sources. An extension of the problem is the case where the apparent calibrator source locations are unknown, e.g., due to refractive propagation paths. For this case, the WALS method is supplemented with weighted subspace fitting (WSF) direction finding techniques. Using Monte Carlo simulations we demonstrate that both methods are asymptotically statistically efficient and converge within two iterations even in cases of low SNR.Comment: 11 pages, 8 figure