820 research outputs found
Architectural support for task dependence management with flexible software scheduling
The growing complexity of multi-core architectures has motivated a wide range of software mechanisms to improve the orchestration of parallel executions. Task parallelism has become a very attractive approach thanks to its programmability, portability and potential for optimizations. However, with the expected increase in core counts, finer-grained tasking will be required to exploit the available parallelism, which will increase the overheads introduced by the runtime system. This work presents Task Dependence Manager (TDM), a hardware/software co-designed mechanism to mitigate runtime system overheads. TDM introduces a hardware unit, denoted Dependence Management Unit (DMU), and minimal ISA extensions that allow the runtime system to offload costly dependence tracking operations to the DMU and to still perform task scheduling in software. With lower hardware cost, TDM outperforms hardware-based solutions and enhances the flexibility, adaptability and composability of the system. Results show that TDM improves performance by 12.3% and reduces EDP by 20.4% on average with respect to a software runtime system. Compared to a runtime system fully implemented in hardware, TDM achieves an average speedup of 4.2% with 7.3x less area requirements and significant EDP reductions. In addition, five different software schedulers are evaluated with TDM, illustrating its flexibility and performance gains.This work has been supported by the RoMoL ERC Advanced Grant (GA 321253), by the European HiPEAC Network of Excellence, by the Spanish Ministry of Science and
Innovation (contracts TIN2015-65316-P, TIN2016-76635-C2-2-R and TIN2016-81840-REDT), by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272), and by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671697 and No. 671610. M. Moretó has been partially supported by the Ministry of Economy and Competitiveness under Juan de la Cierva postdoctoral fellowship number JCI-2012-15047.Peer ReviewedPostprint (author's final draft
Optimizing SIMD execution in HW/SW co-designed processors
SIMD accelerators are ubiquitous in microprocessors from different computing domains. Their high compute power and hardware simplicity improve overall performance in an energy efficient manner. Moreover, their replicated functional units and simple control mechanism make them amenable to scaling to higher vector lengths. However, code generation for these accelerators has been a challenge from the days of their inception. Compilers generate vector code conservatively to ensure correctness. As a result they lose significant vectorization opportunities and fail to extract maximum benefits out of SIMD accelerators.
This thesis proposes to vectorize the program binary at runtime in a speculative manner, in addition to the compile time static vectorization. There are different environments that support runtime profiling and optimization support required for dynamic vectorization, one of most prominent ones being: 1) Dynamic Binary Translators and Optimizers (DBTO) and 2) Hardware/Software (HW/SW) Co-designed Processors. HW/SW co-designed environment provides several advantages over DBTOs like transparent incorporations of new hardware features, binary compatibility, etc. Therefore, we use HW/SW co-designed environment to assess the potential of speculative dynamic vectorization.
Furthermore, we analyze vector code generation for wider vector units and find out that even though SIMD accelerators are amenable to scaling from the hardware point of view, vector code generation at higher vector length is even more challenging. The two major factors impeding vectorization for wider SIMD units are: 1) Reduced dynamic instruction stream coverage for vectorization and 2) Large number of permutation instructions. To solve the first problem we propose Variable Length Vectorization that iteratively vectorizes for multiple vector lengths to improve dynamic instruction stream coverage. Secondly, to reduce the number of permutation instructions we propose Selective Writing that selectively writes to different parts of a vector register and avoids permutations.
Finally, we tackle the problem of leakage energy in SIMD accelerators. Since SIMD accelerators consume significant amount of real estate on the chip, they become the principle source of leakage if not utilized judiciously. Power gating is one of the most widely used techniques to reduce leakage energy of functional units. However, power gating has its own energy and performance overhead associated with it. We propose to selectively devectorize the vector code when higher SIMD lanes are used intermittently. This selective devectorization keeps the higher SIMD lanes idle and power gated for maximum duration. Therefore, resulting in overall leakage energy reduction.Postprint (published version
An Advanced Compiler Designed for a VLIW DSP for Sensors-Based Systems
The VLIW architecture can be exploited to greatly enhance instruction level parallelism, thus it can provide computation power and energy efficiency advantages, which satisfies the requirements of future sensor-based systems. However, as VLIW codes are mainly compiled statically, the performance of a VLIW processor is dominated by the behavior of its compiler. In this paper, we present an advanced compiler designed for a VLIW DSP named Magnolia, which will be used in sensor-based systems. This compiler is based on the Open64 compiler. We have implemented several advanced optimization techniques in the compiler, and fulfilled the O3 level optimization. Benchmarks from the DSPstone test suite are used to verify the compiler. Results show that the code generated by our compiler can make the performance of Magnolia match that of the current state-of-the-art DSP processors
Recommended from our members
Scalable hardware memory disambiguation
This dissertation deals with one of the long-standing problems in Computer Architecture
– the problem of memory disambiguation. Microprocessors typically reorder
memory instructions during execution to improve concurrency. Such microprocessors
use hardware memory structures for memory disambiguation, known as LoadStore
Queues (LSQs), to ensure that memory instruction dependences are satisfied
even when the memory instructions execute out-of-order. A typical LSQ implementation
(circa 2006) holds all in-flight memory instructions in a physically centralized
LSQ and performs a fully associative search on all buffered instructions to ensure
that memory dependences are satisfied. These LSQ implementations do not scale
because they use large, fully associative structures, which are known to be slow and
power hungry. The increasing trend towards distributed microarchitectures further
exacerbates these problems. As on-chip wire delays increase and high-performance
processors become necessarily distributed, centralized structures such as the LSQ
can limit scalability.
This dissertation describes techniques to create scalable LSQs in both centralized
and distributed microarchitectures. The problems and solutions described
in this thesis are motivated and validated by real system designs. The dissertation
starts with a description of the partitioned primary memory system of the TRIPS
processor, of which the LSQ is an important component, and then through a series
of optimizations describes how the power, area, and centralization problems
of the LSQ can be solved with minor performance losses (if at all) even for large
number of in flight memory instructions. The four solutions described in this dissertation
— partitioning, filtering, late binding and efficient overflow management —
enable power-, area-efficient, distributed and scalable LSQs, which in turn enable
aggressive large-window processors capable of simultaneously executing thousands
of instructions.
To mitigate the power problem, we replaced the power-hungry, fully associative
search with a power-efficient hash table lookup using a simple address-based
Bloom filter. Bloom filters are probabilistic data structures used for testing set
membership and can be used to quickly check if an instruction with the same data
address is likely to be found in the LSQ without performing the associative search.
Bloom filters typically eliminate more than 80% of the associative searches and they
are highly effective because in most programs, it is uncommon for loads and stores
to have the same data address and be in execution simultaneously.
To rectify the area problem, we observe the fact that only a small fraction
of all memory instructions are dependent, that only such dependent instructions
need to be buffered in the LSQ, and that these instructions need to be in the LSQ
only for certain parts of the pipelined execution. We propose two mechanisms to
exploit these observations. The first mechanism, area filtering, is a hardware mechanism
that couples Bloom filters and dependence predictors to dynamically identify
and buffer only those instructions which are likely to be dependent. The second
mechanism, late binding, reduces the occupancy and hence size of the LSQ. Both of
these optimizations allows the number of LSQ slots to be reduced by up to one-half
compared to a traditional organization without any performance degradation.
Finally, we describe a new decentralized LSQ design for handling LSQ structural
hazards in distributed microarchitectures. Decentralization of LSQs, and to
a large extent distributed microarchitectures with memory speculation, has proved
to be impractical because of the high performance penalties associated with the
mechanisms for dealing with hazards. To solve this problem, we applied classic
flow-control techniques from interconnection networks for handling resource con-
flicts. The first method, memory-side buffering, buffers the overflowing instructions
in a separate buffer near the LSQs. The second scheme, execution-side NACKing,
sends the overflowing instruction back to the issue window from which it is later
re-issued. The third scheme, network buffering, uses the buffers in the interconnection
network between the execution units and memory to hold instructions when the
LSQ is full, and uses virtual channel flow control to avoid deadlocks. The network
buffering scheme is the most robust of all the overflow schemes and shows less than
1% performance degradation due to overflows for a subset of SPEC CPU 2000 and
EEMBC benchmarks on a cycle-accurate simulator that closely models the TRIPS
processor.
The techniques proposed in this dissertation are independent, architectureneutral
and their cumulative benefits result in LSQs that can be partitioned at a
fine granularity and have low design complexity. Each of these partitions selectively
buffers only memory instructions with true dependences and can be closely coupled
with the execution units thus minimizing power, area, and latency. Such LSQ
designs with near-ideal characteristics are well suited for microarchitectures with
thousands of instructions in-flight and may enable even more aggressive microarchitectures
in the future.Computer Science
Enlarging instruction streams
The stream fetch engine is a high-performance fetch architecture based on the concept of an instruction stream. We call a sequence of instructions from the target of a taken branch to the next taken branch, potentially containing multiple basic blocks, a stream. The long length of instruction streams makes it possible for the stream fetch engine to provide a high fetch bandwidth and to hide the branch predictor access latency, leading to performance results close to a trace cache at a lower implementation cost and complexity. Therefore, enlarging instruction streams is an excellent way to improve the stream fetch engine. In this paper, we present several hardware and software mechanisms focused on enlarging those streams that finalize at particular branch types. However, our results point out that focusing on particular branch types is not a good strategy due to Amdahl's law. Consequently, we propose the multiple-stream predictor, a novel mechanism that deals with all branch types by combining single streams into long virtual streams. This proposal tolerates the prediction table access latency without requiring the complexity caused by additional hardware mechanisms like prediction overriding. Moreover, it provides high-performance results which are comparable to state-of-the-art fetch architectures but with a simpler design that consumes less energy.Peer ReviewedPostprint (published version
- …