Managing contamination delay to improve Timing Speculation architectures

Timing Speculation (TS) is a widely known method for realizing better-than-worst-case systems. Aggressive clocking, realizable by TS, enable systems to operate beyond specified safe frequency limits to effectively exploit the data dependent circuit delay. However, the range of aggressive clocking for performance enhancement under TS is restricted by short paths. In this paper, we show that increasing the lengths of short paths of the circuit increases the effectiveness of TS, leading to performance improvement. Also, we propose an algorithm to efficiently add delay buffers to selected short paths while keeping down the area penalty. We present our algorithm results for ISCAS-85 suite and show that it is possible to increase the circuit contamination delay by up to 30% without affecting the propagation delay. We also explore the possibility of increasing short path delays further by relaxing the constraint on propagation delay and analyze the performance impact

RAID Organizations for Improved Reliability and Performance: A Not Entirely Unbiased Tutorial (1st revision)

RAID proposal advocated replacing large disks with arrays of PC disks, but as the capacity of small disks increased 100-fold in 1990s the production of large disks was discontinued. Storage dependability is increased via replication or erasure coding. Cloud storage providers store multiple copies of data obviating for need for further redundancy. Varitaions of RAID based on local recovery codes, partial MDS reduce recovery cost. NAND flash Solid State Disks - SSDs have low latency and high bandwidth, are more reliable, consume less power and have a lower TCO than Hard Disk Drives, which are more viable for hyperscalers.Comment: Submitted to ACM Computing Surveys. arXiv admin note: substantial text overlap with arXiv:2306.0876

Re-Architecting Mass Storage Input/Output for Performance and Efficiency

The semantics and fundamental structure of modern operating system IO systems dates from the mid-1960\u27s to the mid-1970\u27s, a period of time when computing power and memory capacity were a mere fraction of today\u27s systems. Engineering tradeoffs made in the past enshrine the resource availability context of computing at that time. Deconstructing the semantics of the IO infrastructure allows a re-examination of long-standing design decisions in the context of today\u27s greater processing and memory resources. The re-examination allows changes to several wide-spread paradigms to improve efficiency and performance

Implementing and Testing the APEX I/O Scheduler in Linux

This thesis seeks to test an implementation of the APEX I/O scheduler to see how it compares to modern schedulers and whether it better serves mixed-media workloads. APEX is a scheduling framework that seeks to provide deterministic guarantees for storage service to applications. The implementation is done in Linux, a modern open source operating system kernel that includes a loadable scheduler framework. The implementation compares favorably with the existing schedulers on Linux, despite problems inherent in the assumptions made in the design of mixed-media schedulers about modern operating system environments

EFFECTIVE GROUPING FOR ENERGY AND PERFORMANCE: CONSTRUCTION OF ADAPTIVE, SUSTAINABLE, AND MAINTAINABLE DATA STORAGE

The performance gap between processors and storage systems has been increasingly critical overthe years. Yet the performance disparity remains, and further, storage energy consumption israpidly becoming a new critical problem. While smarter caching and predictive techniques domuch to alleviate this disparity, the problem persists, and data storage remains a growing contributorto latency and energy consumption.Attempts have been made at data layout maintenance, or intelligent physical placement ofdata, yet in practice, basic heuristics remain predominant. Problems that early studies soughtto solve via layout strategies were proven to be NP-Hard, and data layout maintenance todayremains more art than science. With unknown potential and a domain inherently full of uncertainty,layout maintenance persists as an area largely untapped by modern systems. But uncertainty inworkloads does not imply randomness; access patterns have exhibited repeatable, stable behavior.Predictive information can be gathered, analyzed, and exploited to improve data layouts. Ourgoal is a dynamic, robust, sustainable predictive engine, aimed at improving existing layouts byreplicating data at the storage device level.We present a comprehensive discussion of the design and construction of such a predictive engine,including workload evaluation, where we present and evaluate classical workloads as well asour own highly detailed traces collected over an extended period. We demonstrate significant gainsthrough an initial static grouping mechanism, and compare against an optimal grouping method ofour own construction, and further show significant improvement over competing techniques. We also explore and illustrate the challenges faced when moving from static to dynamic (i.e. online)grouping, and provide motivation and solutions for addressing these challenges. These challengesinclude metadata storage, appropriate predictive collocation, online performance, and physicalplacement. We reduced the metadata needed by several orders of magnitude, reducing the requiredvolume from more than 14% of total storage down to less than 12%. We also demonstrate how ourcollocation strategies outperform competing techniques. Finally, we present our complete modeland evaluate a prototype implementation against real hardware. This model was demonstrated tobe capable of reducing device-level accesses by up to 65%

Data allocation in disk arrays with multiple raid levels

There has been an explosion in the amount of generated data, which has to be stored reliably because it is not easily reproducible. Some datasets require frequent read and write access. like online transaction processing applications. Others just need to be stored safely and read once in a while, as in data mining. This different access requirements can be solved by using the RAID (redundant array of inexpensive disks) paradigm. i.e., RAIDi for the first situation and RAID5 for the second situation. Furthermore rather than providing two disk arrays with RAID 1 and RAID5 capabilities, a controller can be postulated to emulate both. It is referred as a heterogeneous disk array (HDA). Dedicating a subset of disks to RAID 1 results in poor disk utilization, since RAIDi vs RAID5 capacity and bandwidth requirements are not known a priori. Balancing disk loads when disk space is shared among allocation requests, referred to as virtual arrays - VAs poses a difficult problem. RAIDi disk arrays have a higher access rate per gigabyte than RAID5 disk arrays. Allocating more VAs while keeping disk utilizations balanced and within acceptable bounds is the goal of this study. Given its size and access rate a VA\u27s width or the number of its Virtual Disks -VDs is determined. VDs allocations on physical disks using vector-packing heuristics, with disk capacity and bandwidth as the two dimensions are shown to be the best. An allocation is acceptable if it does riot exceed the disk capacity and overload disks even in the presence of disk failures. When disk bandwidth rather than capacity is the bottleneck, the clustered RAID paradigm is applied, which offers a tradeoff between disk space and bandwidth. Another scenario is also considered where the RAID level is determined by a classification algorithm utilizing the access characteristics of the VA, i.e., fractions of small versus large access and the fraction of write versus read accesses. The effect of RAID 1 organization on its reliability and performance is studied too. The effect of disk failures on the X-code two disk failure tolerant array is analyzed and it is shown that the load across disks is highly unbalanced unless in an NxN array groups of N stripes are randomly rotated

Proceedings of the 2nd Annual Conference on NASA/University Advanced Space Design Program

Topics discussed include: lunar transportation system, Mars rover, lunar fiberglass production, geosynchronous space stations, regenerative system for growing plants, lunar mining devices, lunar oxygen transporation system, mobile remote manipulator system, Mars exploration, launch/landing facility for a lunar base, and multi-megawatt nuclear power system