Concepts for Short Range Millimeter-wave Miniaturized Radar Systems with Built-in Self-Test

This work explores short-range millimeter wave radar systems, with emphasis on miniaturization and overall system cost reduction. The designing and implementation processes, starting from the system level design considerations and characterization of the individual components to final implementation of the proposed architecture are described briefly. Several D-band radar systems are developed and their functionality and performances are demonstrated

High Performance LNAs and Mixers for Direct Conversion Receivers in BiCMOS and CMOS Technologies

The trend in cellular chipset design today is to incorporate support for a larger number of frequency bands for each new chipset generation. If the chipset also supports receiver diversity two low noise amplifiers (LNAs) are required for each frequency band. This is however associated with an increase of off-chip components, i.e. matching components for the LNA inputs, as well as complex routing of the RF input signals. If balanced LNAs are implemented the routing complexity is further increased. The first presented work in this thesis is a novel multiband low noise single ended LNA and mixer architecture. The mixer has a novel feedback loop suppressing both second order distortion as well as DC-offset. The performance, verified by Monte Carlo simulations, is sufficient for a WCDMA application. The second presented work is a single ended multiband LNA with programmable integrated matching. The LNA is connected to an on-chip tunable balun generating differential RF signals for a differential mixer. The combination of the narrow band input matching and narrow band balun of the presented LNA is beneficial for suppressing third harmonic downconversion of a WLAN interferer. The single ended architecture has great advantages regarding PCB routing of the RF input signals but is on the other hand more sensitive to common mode interferers, e.g. ground, supply and substrate noise. An analysis of direct conversion receiver requirements is presented together with an overview of different LNA and mixer architectures in both BiCMOS and CMOS technology

Low-power transceiver design for mobile wireless chemical biological sensors

The design of a smart integrated chemical sensor system that will enhance sensor performance and compatibility to Ad hoc network architecture remains a challenge. This work involves the design of a Transceiver for a mobile chemical sensor. The transceiver design integrates all building blocks on-chip, including a low-noise amplifier with an input-matching network, a Voltage Controlled Oscillator with injection locking, Gilbert cell mixers, and a Class E Power amplifier making it as a single-chip transceiver. This proposed low power 2GHz transceiver has been designed in TSMC 0.35~lm CMOS process using Cadence electronic design automation tools. Post layout HSPICE simulation indicates that Design meets the separation of noise levels by 52dB and 42dB in transmitter and receiver respectively with power consumption of 56 mW and 38 mW in transmit and receive mode

Four-element phased-array beamformers and a self-interference canceling full-duplex transciver in 130-nm SiGe for 5G applications at 26 GHz

This thesis is on the design of radio-frequency (RF) integrated front-end circuits for next generation 5G communication systems. The demand for higher data rates and lower latency in 5G networks can only be met using several new technologies including, but not limited to, mm-waves, massive-MIMO, and full-duplex. Use of mm-waves provides more bandwidth that is necessary for high data rates at the cost of increased attenuation in air. Massive-MIMO arrays are required to compensate for this increased path loss by providing beam steering and array gain. Furthermore, full duplex operation is desirable for improved spectrum efficiency and reduced latency. The difficulty of full duplex operation is the self-interference (SI) between transmit (TX) and receive (RX) paths. Conventional methods to suppress this interference utilize either bulky circulators, isolators, couplers or two separate antennas. These methods are not suitable for fully-integrated full-duplex massive-MIMO arrays. This thesis presents circuit and system level solutions to the issues summarized above, in the form of SiGe integrated circuits for 5G applications at 26 GHz. First, a full-duplex RF front-end architecture is proposed that is scalable to massive-MIMO arrays. It is based on blind, RF self-interference cancellation that is applicable to single/shared antenna front-ends. A high resolution RF vector modulator is developed, which is the key building block that empowers the full-duplex frontend architecture by achieving better than state-of-the-art 10-b monotonic phase control. This vector modulator is combined with linear-in-dB variable gain amplifiers and attenuators to realize a precision self-interference cancellation circuitry. Further, adaptive control of this SI canceler is made possible by including an on-chip low-power IQ downconverter. It correlates copies of transmitted and received signals and provides baseband/dc outputs that can be used to adaptively control the SI canceler. The solution comes at the cost of minimal additional circuitry, yet significantly eases linearity requirements of critical receiver blocks at RF/IF such as mixers and ADCs. Second, to complement the proposed full-duplex front-end architecture and to provide a more complete solution, high-performance beamformer ICs with 5-/6- b phase and 3-/4-b amplitude control capabilities are designed. Single-channel, separate transmitter and receiver beamformers are implemented targeting massive- MIMO mode of operation, and their four-channel versions are developed for phasedarray communication systems. Better than state-of-the-art noise performance is obtained in the RX beamformer channel, with a full-channel noise figure of 3.3 d

FDMA Enabled Phase-based Wireless Network-on-Chip using Graphene-based THz-band Antennas

The future growth in System-on-chip design is moving in the direction of multicore systems. Design of efficient interconnects between cores are crucial for improving the performance of a multicore processor. Such trends are seen due to the benefits the multicore systems provide in terms of power reduction and scalability. Network-on-chips (NoC) are viewed as an emerging solution in the design of interconnects in multicore systems. However, Traditional Network-on-chip architectures are no longer able to satisfy the performance requirements due to long distance communication over multi-hop wireline paths. Multi-hop communication leads to higher energy consumption, increase in latency and reduction in bandwidth. Research in recent years has explored emerging technologies such as 3D integration, photonic and radio frequency based Network-on-chips. The use of wireless interconnects using mm-wave antennas are able to alleviate the performance issues in a wireline interconnect system. However, to satisfy the increasing demand for higher bandwidth and lower energy consumption, Wireless Network-on-Chip enabled with high speed direct links operating in THz band between distant cores is desired. Recent research has brought to light highly efficient graphene-based antennas operating in THz band. These antennas can provide high data rate and are found to consume less power with low area overheads. In this thesis, an innovative approach using novel devices based on graphene structures is proposed to provide a high-performance on-chip interconnection. This novel approach combines the regular NoC structure with the proposed wireless infrastructure to exploit the performance benefits. An architecture with wireless interfaces on every core is explored in this work. Simultaneous multiple communications in a network can be achieved by adopting Frequency Division Multiple access (FDMA). However, in a system where all cores are equipped with a wireless interface, FDMA requires more number of frequency bands. This becomes difficult to achieve as the system scales and the number of cores increase. Therefore, a FDMA protocol along with a 4-phased repetitive multi-band architecture is envisioned in this work. The phase-based protocol allows multiple wireless links to be active at a time, the phase-based protocol along with the FDMA protocol provides a reliable data transfer between cores with lesser number of frequency bands. In this thesis, an architecture with a combination of FDMA and phase-based protocol using point-to-point graphene-based wireless links is proposed. The proposed architecture is also extended for a multichip system. With cycle accurate system-level simulations, it is shown that the proposed architecture provides huge gains in performance and energy-efficiency in data transfer both in NoC based multicore and multichip systems

Millimeter-Wave and Terahertz Transceivers in SiGe BiCMOS Technologies

This invited paper reviews the progress of silicon–germanium (SiGe) bipolar-complementary metal–oxide–semiconductor (BiCMOS) technology-based integrated circuits (ICs) during the last two decades. Focus is set on various transceiver (TRX) realizations in the millimeter-wave range from 60 GHz and at terahertz (THz) frequencies above 300 GHz. This article discusses the development of SiGe technologies and ICs with the latter focusing on the commercially most important applications of radar and beyond 5G wireless communications. A variety of examples ranging from 77-GHz automotive radar to THz sensing as well as the beginnings of 60-GHz wireless communication up to THz chipsets for 100-Gb/s data transmission are recapitulated. This article closes with an outlook on emerging fields of research for future advancement of SiGe TRX performance