State-of-the-art in Power Line Communications: from the Applications to the Medium

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and broadband systems, covering potential applications, regulatory and standardization efforts and recent research advancements in channel characterization, physical layer performance, medium access and higher layer specifications and evaluations. We also identify areas of current and further study that will enable the continued success of power line communication technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on Selected Areas in Communications. Special Issue on Power Line Communications and its Integration with the Networking Ecosystem. 201

Contributions à l'étude des communications numériques sur le réseau électrique à l'intérieur des bâtiments : modélisation du canal et optimisation du débit

In recent years, the electrical network has become an essential candidate for high-speed data transmission inside buildings. Many solutions are currently underway in order to optimize these technologies known under the name of in-home Power-Line Communications (PLC). Multiple-Input Multiple-Output (MIMO) technique has recently been transposed into power-line networks for which different signal feeding possibilities can be considered between phase, neutral and earth wires. In this thesis, we propose two original contributions to indoor broadband PLC. The first contribution concerns the MIMO-PLC channel modeling. Based on a Single-Input Single-Output (SISO) parametric channel model presented in the literature, we propose a MIMO one by considering a new parameter which characterizes the spatial correlation. The proposed model enables an accurate description of the spatial correlation of European MIMO PLC field measurements. The second contribution is related to the impulsive noise present in power-line networks which constitutes a major problem in communications systems. We propose an outage capacity approach in order to optimize the average data rate in Orthogonal Frequency Division Multiplexing (OFDM) systems affected by impulsive noise. First, we study the channel capacity as a function of a noise margin provided to the transmitted symbols. Then we determine the analytical expression of the outage probability of an OFDM symbol in terms of the noise margin, by studying in detail the interaction between the noise impulse and the symbol. Based on the two aforementioned relations, we deduce the outage capacity. Then we propose an approach that enables to maximize the average system data rate. Finally, we present the results in the particular case of indoor broadband PLC in the presence of impulsive noise.Au cours de ces dernières années, le réseau électrique est devenu un candidat incontournable pour la transmission de données à haut débit à l’intérieur des bâtiments. De nombreuses solutions sont actuellement à l’étude afin d’optimiser ces technologies connues sous le nom Courants Porteurs en Ligne (CPL) ou PLC (Power-Line Communications). La technique MIMO (Multiple-Input Multiple-Output) a été tout récemment transposée au réseau filaire électrique pour lequel différents modes d’alimentation peuvent être envisagés entre la phase, le neutre et la terre. Dans le cadre de cette thèse, nous proposons deux contributions originales à l’étude des communications numériques sur le réseau électrique à l’intérieur des bâtiments. La première contribution concerne la modélisation du canal MIMO-PLC. En repartant d’un modèle du canal paramétrique SISO (Single-Input Single-Output) connu dans la littérature, nous proposons un modèle du canal MIMO en considérant un nouveau paramètre caractérisant la corrélation spatiale. Le modèle proposé permet de représenter fidèlement la corrélation spatiale des mesures effectuées à l’échelle européenne. La deuxième contribution concerne le bruit impulsif présent sur le réseau électrique domestique qui constitue un problème majeur dans les systèmes de communications. Nous proposons une méthode basée sur la notion de capacité de coupure afin d’optimiser le débit moyen dans les systèmes OFDM (Orthogonal Frequency Division Multiplexing) soumis aux bruits impulsifs. D’abord, nous étudions la capacité du système en fonction d’une marge de bruit fournie aux symboles transmis. Ensuite, nous déterminons l’expression analytique de la probabilité de coupure (outage) d’un symbole OFDM en fonction de cette marge, en étudiant de manière détaillée l’interaction entre l’impulsion de bruit et le symbole. A partir de ces deux calculs, nous déduisons la capacité de coupure. Puis, nous proposons une approche qui maximise l’espérance mathématique du débit reçu. Finalement, nous présentons les résultats obtenus dans le cas particulier d’une transmission à haut débit sur PLC en présence de bruits impulsifs

Power line communications over time-varying frequency-selective power line channels for smart home applications

Many countries in the world are developing the next generation power grid, the smart grid, to combat the ongoing severe environmental problems and achieve e�cient use of the electricity power grid. Smart metering is an enabling technology in the smart grid to address the energy wasting problem. It monitors and optimises the power consumption of consumers' devices and appliances. To ensure proper operation of smart metering, a reliable communication infrastructure plays a crucial role. Power line communication (PLC) is regarded as a promising candidate that will ful�l the requirements of smart grid applications. It is also the only wired technology which has a deployment cost comparable to wireless communication. PLC is most commonly used in the low-voltage (LV) power network which includes indoor power networks and the outdoor LV distribution networks. In this thesis we consider using PLC in the indoor power network to support the communication between the smart meter and a variety of appliances that are connected to the network. Power line communication (PLC) system design in indoor power network is challenging due to a variety of channel impairments, such as time-varying frequency-selective channel and complex impulsive noise scenarios. Among these impairments, the timevarying channel behaviour is an interesting topic that hasn't been thoroughly investigated. Therefore, in this thesis we focus on investigating this behaviour and developing a low-cost but reliable PLC system that is able to support smart metering applications in indoor environments. To aid the study and design of such a system, the characterisation and modelling of indoor power line channel are extensively investigated in this thesis. In addition, a exible simulation tool that is able to generate random time-varying indoor power line channel realisations is demonstrated. Orthogonal frequency division modulation (OFDM) is commonly used in existing PLC standards. However, when it is adopted for time-varying power line channels, it may experience signi�cant intercarrier interference (ICI) due to the Doppler spreading caused by channel time variation. Our investigation on the performance of an ordinary OFDM system over time-varying power line channel reveals that if ICI is not properly compensated, the system may su�er from severe performance loss. We also investigate the performance of some linear equalisers including zero forcing (ZF), minimum mean squared error (MMSE) and banded equalisers. Among them, banded equalisers provide the best tradeo� between complexity and performance. For a better tradeo� between complexity and performance, time-domain receiver windowing is usually applied together with banded equalisers. This subject has been well investigated for wireless communication, but not for PLC. In this thesis, we investigate the performance of some well-known receiver window design criteria that was developed for wireless communication for time-varying power line channels. It is found that these criteria do not work well over time-varying power line channels. Therefore, to �ll this gap, we propose an alternative window design criterion in this thesis. Simulations have shown that our proposal outperforms the other criteria

Dynamic Channel Modeling for Indoor Millimeter-Wave Propagation Channels Based on Measurements

In this contribution, a recently conducted measurement campaign for indoor millimeter-wave propagation channels is introduced. A vector network analyzer (VNA)-based channel sounder was exploited to record the channel characteristics at the frequency band from 28-30 GHz. A virtual uniform circular array (UCA) with a radius of 0.25m was formed using a rotator with 360 steps. Moreover, by taking advantage of fiber-optic technique applied in the channel sounder, measurements at 50 positions were performed from an indoor hall to an indoor corridor along a long pre-defined route. A low-complexity highresolution propagation estimation (HRPE) algorithm is exploited to estimate the propagation parameters of multipath components (MPCs). Based on the HRPE estimation results, a novel clustering identification and tracking algorithm is proposed to trace clusters. Composite channel characteristics, cluster-level characteristics and dynamic (or birth-death) behaviours of the clusters are investigated, which constitute a dynamic model for the indoor millimeter-wave channel

Impacto de las características de la red eléctrica en canales MIMO PLC domésticos

The recent release of indoor Power Line Communications (PLC) specifications with Multiple-Input Multiple-Output (MIMO) capabilities has significantly increased the bit rates achieved in these channels. However, the performance reached by the use of these methods may differ from one location to another due to the heterogeneous nature of the domestic power grid. In this work, a closer look at the relation between channel performance and the power grid cabling is taken. To that end, some channel features like attenuation, spatial correlation and capacity are analyzed by means of a set of 50 simulated channel topologies in the frequency band from 1 to 80 MHz.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

A time domain model of background noise for inhome PLC networks

International audienceMultiple-Input/Multiple-Output (MIMO) techniques have recently become an important research field for enhancing the performance of in-home Power Line Communication (PLC) systems by exploiting the additional Protective Earth wire. The development of such systems requires an accurate description of the channel noise. In this paper we have presented a model for PLC background noise based on an extensive set of measurements. We have adopted the framework of multivariate time series to model the PLC background noise.This paper employs the Vector Autoregressive (VAR) modeling technique to extract noise model parameters from the measured noise. We have verified the accuracy of the noise model by comparing time and frequency domain correlation of measured and modeled noises