Dual And Triple Feeding For Full-Wave Dipole Antenna [TK7871.67.D56 H677 2007 f rb].

Tesis ini menfokus kepada pembangunan teknik baru untuk suapan antena dwikutub gelombang penuh. Terdapat tujuh cara suapan dalam kajian ini, empat cara untuk dua suapan dan tiga cara untuk tiga suapan. This thesis is focused on the development of a new full-wave dipole antenna feeding technique. Seven such techniques of feeding were tested in the study, in which, four were used with dual feeding and three with triple feeding

Magneto-Electric Dipole Antenna Arrays

A planar magneto-electric (ME) dipole antenna array is proposed and demonstrated by both full-wave analysis and experiments. The proposed structure leverages the infinite wavelength propagation characteristic of composite right/left-handed (CRLH) transmission lines to form high-gain magnetic radiators combined with radial conventional electric radiators, where the overall structure is excited by a single differential feed. The traveling-wave type nature of the proposed ME-dipole antenna enables the formation of directive arrays with high-gain characteristics and scanning capability. Peak gains of 10.84 dB and 5.73 dB are demonstrated for the electric dipole and magnetic-dipole radiation components, respectively.Comment: 9 pages, 17 figure

Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

Millimeter-Wave Components and Antennas for Spatial and Polarization Diversity using PRGW Technology

The evolution of the wireless communication systems to the future generation is accompanied by a huge improvement in the system performance through providing a high data rate with low latency. These systems require access to millimeter wave (mmWave) bands, which offer several advantages such as physically smaller components and much wider bandwidthcomparedtomicrowavefrequencies. However, mmWavecomponentsstillneed a significant improvement to follow the rapid variations in future technologies. Although mmWave frequencies can carry more data, they are limited in terms of their penetration capabilities and their coverage range. Moreover, these frequencies avoid deploying traditional guiding technologies such as microstrip lines due to high radiation and material losses. Hence, utilizing new guiding structure techniques such as Printed Ridge Gap Waveguide (PRGW) is essential in future mmWave systems implementation. ThemainpurposeofthisthesisistodesignmmWavecomponents,antennasubsystems and utilize both in beam switching systems. The major mmWave components addressed in this thesis are hybrid coupler, crossover, and differential power divider where the host guidingstructureisthePRGW.Inaddition,variousdesignsfordifferentialfeedingPRGW antennas and antenna arrays are presented featuring wide bandwidth and high gain in mmWave band. Moreover, the integration of both the proposed components and the featured antennas is introduced. This can be considered as a significant step toward the requirements fulfillment of today's advanced communication systems enabling both space and polarization diversity. The proposed components are designed to meet the future ever-increasing consumer experience and technical requirements such as low loss, compact size, and low-cost fabrication. This directed the presented research to have a contribution into three major parts. The first part highlights the feeding structures, where mmWave PRGW directional couplers and differential feeding power divider are designed and validated. These components are among the most important passive elements of microwave circuits used in antennabeam-switchingnetworks. Different3-dBquadraturehybridcouplersandcrossover prototypes are proposed, featured with a compact size and a wide bandwidth beyond 10 % at 30 GHz. In the second part, a beam switching network implemented using hybrid couplers is presented. The proposed beam switching network is a 4 × 4 PRGW Butler matrix that used to feed a Magneto-electric (ME) dipole antenna array. As a result, a 2-D scanning antenna array with a compact size, wide bandwidth, and high radiation efficiency larger than84%isachieved. Furthergainenhancementof5dBiisachievedthroughdeployinga hybridgainenhancementtechniqueincludingAMCmushroomshapesaroundtheantenna array with a dielectric superstrate located in the broadside direction. The proposed scanning antenna array can be considered as a step toward the desired improvement in the data rate and coverage through enabling the space diversity for the communication link. The final activity is related to the development of high-gain wide-band mmWave antenna arrays for potential use in future mmWave applications. The first proposed configuration is a differential feeding circular polarized aperture antenna array implemented with PRGW technology. Differential feeding antenna designs offer more advantages than single- ended antennas for mmWave communications as they are easy to be integrated with differential mmWave monolithic ICs that have high common-mode rejection ratio providing an immunity of the environmental noise. The proposed differential feeding antenna array is designed and fabricated, which featured with a stable high gain and a high radiation efficiency over a wide bandwidth. Another proposed configuration is a dualpolarized ME-dipole PRGW antenna array for mmWave wireless communication. Dual polarizationisconsideredoneofthemostimportantantennasolutionsthatcansavecosts and space for modern communication systems. In addition, it is an effective strategy for multiple-input and multiple-output systems that can reduce the size of multiple antennas systems by utilizing extra orthogonal polarization. The proposed dual- polarized antenna array is designed to achieve a stable gain of 15 ± 1 dBi with low cross- polarization less than -30 dB over a wide frequency range of 20 % at 30 GHz

Wideband Dual Circularly Polarized Antenna for Intelligent Transport Systems

A wideband dual circularly polarized (DCP) antenna is presented for intelligent transport system (ITS) applications, which can be used to improve the receiver sensitivity and communication quality of ITS. The presented DCP antenna is composed of an orthogonal power divider (OPD) with two orthogonal input ports, four phase shifters for quadrature phase output, and four crossed dipoles for DCP radiation. Detailed equivalent circuit analysis shows that the OPD has two orthogonal inputs and four equal magnitude in-phase and out-of-phase outputs. To achieve two sets of orthogonal quadrature output signals for DCP radiation, the lumped element based differential right-hand transmission line unit cell and left-hand transmission line unit cell are elaborately introduced as the ±45° phase shifters, and incorporated into the OPD. Eventually, orthogonal quadrature signals are successfully obtained and fed to the crossed dipoles for DCP radiation. The proposed antenna was then designed, fabricated, and measured for ITS applications. The measured results show that the overlapped impedance bandwidth of both two input ports is 1.07–1.85 GHz (53.4%), and the isolation is higher than 15.2 dB. Moreover, low axial ratio (<1.7 dB) and symmetrical radiation patterns are achieved for unidirectional DCP radiation

Adaptive multibeam antennas for spacelab. Phase A: Feasibility study

The feasibility was studied of using adaptive multibeam multi-frequency antennas on the spacelab, and to define the experiment configuration and program plan needed for a demonstration to prove the concept. Three applications missions were selected, and requirements were defined for an L band communications experiment, an L band radiometer experiment, and a Ku band communications experiment. Reflector, passive lens, and phased array antenna systems were considered, and the Adaptive Multibeam Phased Array (AMPA) was chosen. Array configuration and beamforming network tradeoffs resulted in a single 3m x 3m L band array with 576 elements for high radiometer beam efficiency. Separate 0.4m x 0.4 m arrays are used to transmit and receive at Ku band with either 576 elements or thinned apertures. Each array has two independently steerable 5 deg beams, which are adaptively controlled

Compact metallic RFID tag antennas with a loop-fed method

Several compact, low profile and metal-attachable RFID tag antennas with a loop-fed method are proposed for UHF RFID systems. The structure of the proposed antennas comprise of two parts: (1) The radiator part consists of two shorted patches, which can be treated as two quarter-wave patch antennas or a cavity. (2) A small loop printed on the paper serves as the feeding structure. The small loop provides the needed inductance for the tag and is connected to the RFID chip. The input impedance of the antenna can be easily adjusted by changing loop dimensions. The antenna has the compact size of 80 mm × 25 mm × 3.5 mm, and the realized gain about -3.6 dB. The measured results show that these antennas have good performance when attached onto metallic surfaces. © 2011 IEEE.published_or_final_versio

Arbitrarily Oriented Biaxially Anisotropic Media: Wave Behavior and Microstrip Antennas

This dissertation explores the electromagnetic behavior of arbitrarily oriented biaxially anisotropic media. An overview of wave behavior in biaxially anisotropic (or simply biaxial) media is presented. The reflection and transmission behaviors of electromagnetic waves from half-space and two-layer isotropic-biaxial interfaces are studied. The reflection and transmission coefficients are used in the formulation of eigenvector dyadic Green\u27s functions. These Green\u27s functions are employed in full-wave analyses of rectangular microstrip antennas printed on biaxial substrates. The general characteristics of electrically biaxially anisotropic (biaxial) media are presented including permittivity tensors, optic axes, orientation of the medium, and birefringence. After a detailed discussion of wave propagation, wave behavior at isotropic-biaxial interfaces is investigated. The reflection and transmission of electromagnetic waves incident upon half-space and two-layer interfaces, at which the waves may be incident from either the isotropic region or the biaxial region, are investigated. The biaxial medium considered may be aligned with the principal coordinate system or may be arbitrarily oriented. Critical angle and Brewster angle effects are analyzed for the half-space case. Once the wave behavior is well understood, the eigenvector dyadic Green\u27s function is presented for two-layer geometries involving isotropic and biaxially anisotropic media. The symmetrical property of the dyadic Green\u27s function is derived and used to generate an unknown Green\u27s function from a known Green\u27s function for the two-layer geometry of interest. This new Green\u27s function is used to model rectangular microstrip antennas. Following the investigation of reflection and transmission, rectangular microstrip antennas are analyzed using the eigenvector dyadic Green\u27s function and the method of moments. Galerkin\u27s method is used to evaluate current distributions on gap-fed dipole antennas and probe-fed patch antennas. The resulting current distributions are used to compute antenna parameters such as input impedance, resonant length and principal polarization radiation patterns. For the patch antennas, impedance bandwidth and cross-polarization patterns are also investigated. Results are presented for biaxially anisotropic substrates of varying thickness, permittivities, and orientations, providing the understanding of the complex behaviors of microstrip antennas printed on biaxially anisotropic substrates