256 research outputs found
Mitigating PAPR in cooperative wireless networks with frequency selective channels and relay selection
The focus of this thesis is peak-to-average power ratio (PAPR) reduction in cooperative wireless networks which exploit orthogonal frequency division multiplexing in transmission. To reduce the PAPR clipping is employed at the source node. The first contribution focuses
upon an amplify-and-forward (AF) type network with four relay nodes which exploits distributed closed loop extended orthogonal space frequency block coding to improve end-to-end performance. Oversampling and filtering are used at the source node to reduce out-of-band interference and the iterative amplitude reconstruction decoding technique is used at the destination node to mitigate in-band distortion which is introduced by the clipping process. In addition, by exploiting quantized group feedback and phase rotation at two of the relay nodes, the system achieves full cooperative diversity in addition to array gain.
The second contribution area is outage probability analysis in the context of multi-relay selection in a cooperative AF network with frequency selective fading channels. The gains of time domain multi-path fading channels with L paths are modeled with an Erlang distribution.
General closed form expressions for the lower and upper bounds of outage probability are derived for arbitrary channel length L as a function of end-to-end signal to noise ratio. This analysis is then extended for the case when single relay selection from an arbitrary number of relay nodes M is performed. The spatial and temporal cooperative diversity gain is then analysed. In addition, exact form of outage probability for multi-path channel length L = 2 and selecting the best single relay from an arbitrary number of relay nodes M is obtained. Moreover, selecting a pair of relays when L = 2 or 3 is additionally analysed.
Finally, the third contribution context is outage probability analysis of a cooperative AF network with single and two relay pair selection from M available relay nodes together with clipping at the source node, which is explicitly modelled. MATLAB and Maple software based simulations are employed throughout the thesis to support the analytical results and assess the performance of algorithms and methods
Index modulation for next generation wireless communications.
Doctoral Degree. University of KwaZulu-Natal, Durban.A multicarrier index modulation technique in the form of quadrature spatial modulation (QSM)
orthogonal frequency division multiplexing (QSM-OFDM) is proposed, in which transmit antenna
indices are employed to transmit additional bits. Monte Carlo simulation results demonstrates a 5 dB
gain in signal-to-noise ratio (SNR) over other OFDM schemes. Furthermore, an analysis of the
receiver computational complexity is presented.
A low-complexity near-ML detector for space-time block coded (STBC) spatial modulation
(STBC-SM) with cyclic structure (STBC-CSM), which demonstrate near-ML error performance and
yields significant reduction in computational complexity is proposed. In addition, the union-bound
theoretical framework to quantify the average bit-error probability (ABEP) of STBC-CSM is
formulated and validates the Monte Carlo simulation results.
The application of media-based modulation (MBM), to STBC-SM and STBC-CSM employing radio
frequency (RF) mirrors, in the form of MBSTBC-SM and MBSTBC-CSM is proposed to improve
the error performance. Numerical results of the proposed schemes demonstrate significant
improvement in error performance when compared with STBC-CSM and STBC-SM. In addition, the
analytical framework of the union-bound on the ABEP of MBSTBC-SM and MBSTBC-CSM for the
ML detector is formulated and agrees well with Monte Carlo simulations. Furthermore, a
low-complexity near-ML detector for MBSTBC-SM and MBSTBC-CSM is proposed, and achieves a
near-ML error performance. Monte Carlo simulation results demonstrate a trade-off between the
error performance and the resolution of the detector that is employed.
Finally, the application of MBM, an index modulated system to spatial modulation, in the form of
spatial MBM (SMBM) is investigated. SMBM employs RF mirrors located around the transmit
antenna units to create distinct channel paths to the receiver. This thesis presents an easy to evaluate
theoretical bound for the error performance of SMBM, which is validated by Monte Carlo simulation
results. Lastly, two low-complexity suboptimal mirror activation pattern (MAP) optimization
techniques are proposed, which improve the error performance of SMBM significantly
A Review on PAPR Reduction in Perspective of BER Performance in MIMO-OFDM Based Next Generation Wireless Systems.
Today, high speed and trustworthy wireless communication over mobile is the requirement of society. As the mobile applications and the users are rapidly increasing, it is obligatory to have more reliable, high speed wireless network with high throughput, which will combat the disadvantages in existing system in this multiuser environment. In wireless system the received signal may be corrupted due to noise and interferences such as ‘inter symbol interference’ and ‘inter carrier interference’ when subjected to multi-path fading. Also the performance the system may be affected due to poor ‘bit error rate’ and high ‘peak to average power ratio’ value, which further affect the signal power and spectral efficiency of transmitted signal. The blend of ‘orthogonal frequency division multiplexing’ and ‘multi input multi output’ antenna system referred as MIMO-OFDM system, which offers the improvement in quality of service and higher throughput to satisfy the tomorrow’s need. This review article mainly focuses on various technologies adopted by different researchers for enhancing the ‘bit error rates’, ‘peak to average power ratio’, ‘signal to noise ratio’ and ‘spectral efficiency’ performances in wireless systems. We continue by highlighting the limitations and comparing results of conventional methods, schemes and algorithms proposed by different researchers. We also focus on the multiple antenna system (MIMO), which is designed for future multiuser environment to enhance the capacity or to have high throughput along with good quality services
Técnicas de pré-codificação para sistemas multicelulares coordenados
Doutoramento em TelecomunicaçõesCoordenação Multicélula é um tópico de investigação em rápido
crescimento e uma solução promissora para controlar a interferência entre
células em sistemas celulares, melhorando a equidade do sistema e
aumentando a sua capacidade. Esta tecnologia já está em estudo no LTEAdvanced
sob o conceito de coordenação multiponto (COMP). Existem
várias abordagens sobre coordenação multicélula, dependendo da
quantidade e do tipo de informação partilhada pelas estações base, através
da rede de suporte (backhaul network), e do local onde essa informação é
processada, i.e., numa unidade de processamento central ou de uma forma
distribuída em cada estação base.
Nesta tese, são propostas técnicas de pré-codificação e alocação de
potência considerando várias estratégias: centralizada, todo o
processamento é feito na unidade de processamento central; semidistribuída,
neste caso apenas parte do processamento é executado na
unidade de processamento central, nomeadamente a potência alocada a
cada utilizador servido por cada estação base; e distribuída em que o
processamento é feito localmente em cada estação base. Os esquemas
propostos são projectados em duas fases: primeiro são propostas soluções
de pré-codificação para mitigar ou eliminar a interferência entre células,
de seguida o sistema é melhorado através do desenvolvimento de vários
esquemas de alocação de potência. São propostas três esquemas de
alocação de potência centralizada condicionada a cada estação base e com
diferentes relações entre desempenho e complexidade. São também
derivados esquemas de alocação distribuídos, assumindo que um sistema
multicelular pode ser visto como a sobreposição de vários sistemas com
uma única célula. Com base neste conceito foi definido uma taxa de erro
média virtual para cada um desses sistemas de célula única que compõem
o sistema multicelular, permitindo assim projectar esquemas de alocação
de potência completamente distribuídos.
Todos os esquemas propostos foram avaliados em cenários realistas,
bastante próximos dos considerados no LTE. Os resultados mostram que
os esquemas propostos são eficientes a remover a interferência entre
células e que o desempenho das técnicas de alocação de potência
propostas é claramente superior ao caso de não alocação de potência. O
desempenho dos sistemas completamente distribuídos é inferior aos
baseados num processamento centralizado, mas em contrapartida podem
ser usados em sistemas em que a rede de suporte não permita a troca de
grandes quantidades de informação.Multicell coordination is a promising solution for cellular wireless systems
to mitigate inter-cell interference, improving system fairness and
increasing capacity and thus is already under study in LTE-A under the
coordinated multipoint (CoMP) concept. There are several coordinated
transmission approaches depending on the amount of information shared
by the transmitters through the backhaul network and where the
processing takes place i.e. in a central processing unit or in a distributed
way on each base station.
In this thesis, we propose joint precoding and power allocation techniques
considering different strategies: Full-centralized, where all the processing
takes place at the central unit; Semi-distributed, in this case only some
process related with power allocation is done at the central unit; and Fulldistributed,
where all the processing is done locally at each base station.
The methods are designed in two phases: first the inter-cell interference is
removed by applying a set of centralized or distributed precoding vectors;
then the system is further optimized by centralized or distributed power
allocation schemes. Three centralized power allocation algorithms with
per-BS power constraint and different complexity tradeoffs are proposed.
Also distributed power allocation schemes are proposed by considering
the multicell system as superposition of single cell systems, where we
define the average virtual bit error rate (BER) of interference-free single
cell system, allowing us to compute the power allocation coefficients in a
distributed manner at each BS.
All proposed schemes are evaluated in realistic scenarios considering LTE
specifications. The numerical evaluations show that the proposed schemes
are efficient in removing inter-cell interference and improve system
performance comparing to equal power allocation. Furthermore, fulldistributed
schemes can be used when the amounts of information to be
exchanged over the backhaul is restricted, although system performance is
slightly degraded from semi-distributed and full-centralized schemes, but
the complexity is considerably lower. Besides that for high degrees of
freedom distributed schemes show similar behaviour to centralized ones
MIMO Systems
In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity
Peak to average power ratio reduction and error control in MIMO-OFDM HARQ System
Currently, multiple-input multiple-output orthogonal frequency division multiplexing (MIMOOFDM) systems underlie crucial wireless communication systems such as commercial 4G and 5G networks, tactical communication, and interoperable Public Safety communications. However, one drawback arising from OFDM modulation is its resulting high peak-to-average power ratio (PAPR). This problem increases with an increase in the number of transmit antennas.
In this work, a new hybrid PAPR reduction technique is proposed for space-time block coding (STBC) MIMO-OFDM systems that combine the coding capabilities to PAPR reduction methods, while leveraging the new degree of freedom provided by the presence of multiple transmit chairs (MIMO).
In the first part, we presented an extensive literature review of PAPR reduction techniques for OFDM and MIMO-OFDM systems. The work developed a PAPR reduction technique taxonomy, and analyzed the motivations for reducing the PAPR in current communication systems, emphasizing two important motivations such as power savings and coverage gain. In the tax onomy presented here, we include a new category, namely, hybrid techniques. Additionally, we drew a conclusion regarding the importance of hybrid PAPR reduction techniques.
In the second part, we studied the effect of forward error correction (FEC) codes on the PAPR for the coded OFDM (COFDM) system. We simulated and compared the CCDF of the PAPR and its relationship with the autocorrelation of the COFDM signal before the inverse fast Fourier transform (IFFT) block. This allows to conclude on the main characteristics of the codes that generate high peaks in the COFDM signal, and therefore, the optimal parameters in order to reduce PAPR. We emphasize our study in FEC codes as linear block codes, and convolutional codes.
Finally, we proposed a new hybrid PAPR reduction technique for an STBC MIMO-OFDM system, in which the convolutional code is optimized to avoid PAPR degradation, which also combines successive suboptimal cross-antenna rotation and inversion (SS-CARI) and iterative modified companding and filtering schemes. The new method permits to obtain a significant net gain for the system, i.e., considerable PAPR reduction, bit error rate (BER) gain as compared to the basic MIMO-OFDM system, low complexity, and reduced spectral splatter. The new hybrid technique was extensively evaluated by simulation, and the complementary cumulative distribution function (CCDF), the BER, and the power spectral density (PSD) were compared to the original STBC MIMO-OFDM signal
- …