Limitations of PLL simulation: hidden oscillations in MatLab and SPICE

Nonlinear analysis of the phase-locked loop (PLL) based circuits is a challenging task, thus in modern engineering literature simplified mathematical models and simulation are widely used for their study. In this work the limitations of numerical approach is discussed and it is shown that, e.g. hidden oscillations may not be found by simulation. Corresponding examples in SPICE and MatLab, which may lead to wrong conclusions concerning the operability of PLL-based circuits, are presented

Control of chaos in nonlinear circuits and systems

Nonlinear circuits and systems, such as electronic circuits (Chapter 5), power converters (Chapter 6), human brains (Chapter 7), phase lock loops (Chapter 8), sigma delta modulators (Chapter 9), etc, are found almost everywhere. Understanding nonlinear behaviours as well as control of these circuits and systems are important for real practical engineering applications. Control theories for linear circuits and systems are well developed and almost complete. However, different nonlinear circuits and systems could exhibit very different behaviours. Hence, it is difficult to unify a general control theory for general nonlinear circuits and systems. Up to now, control theories for nonlinear circuits and systems are still very limited. The objective of this book is to review the state of the art chaos control methods for some common nonlinear circuits and systems, such as those listed in the above, and stimulate further research and development in chaos control for nonlinear circuits and systems. This book consists of three parts. The first part of the book consists of reviews on general chaos control methods. In particular, a time-delayed approach written by H. Huang and G. Feng is reviewed in Chapter 1. A master slave synchronization problem for chaotic Lur’e systems is considered. A delay independent and delay dependent synchronization criteria are derived based on the H performance. The design of the time delayed feedback controller can be accomplished by means of the feasibility of linear matrix inequalities. In Chapter 2, a fuzzy model based approach written by H.K. Lam and F.H.F. Leung is reviewed. The synchronization of chaotic systems subject to parameter uncertainties is considered. A chaotic system is first represented by the fuzzy model. A switching controller is then employed to synchronize the systems. The stability conditions in terms of linear matrix inequalities are derived based on the Lyapunov stability theory. The tracking performance and parameter design of the controller are formulated as a generalized eigenvalue minimization problem which is solved numerically via some convex programming techniques. In Chapter 3, a sliding mode control approach written by Y. Feng and X. Yu is reviewed. Three kinds of sliding mode control methods, traditional sliding mode control, terminal sliding mode control and non-singular terminal sliding mode control, are employed for the control of a chaotic system to realize two different control objectives, namely to force the system states to converge to zero or to track desired trajectories. Observer based chaos synchronizations for chaotic systems with single nonlinearity and multi-nonlinearities are also presented. In Chapter 4, an optimal control approach written by C.Z. Wu, C.M. Liu, K.L. Teo and Q.X. Shao is reviewed. Systems with nonparametric regression with jump points are considered. The rough locations of all the possible jump points are identified using existing kernel methods. A smooth spline function is used to approximate each segment of the regression function. A time scaling transformation is derived so as to map the undecided jump points to fixed points. The approximation problem is formulated as an optimization problem and solved via existing optimization tools. The second part of the book consists of reviews on general chaos controls for continuous-time systems. In particular, chaos controls for Chua’s circuits written by L.A.B. Tôrres, L.A. Aguirre, R.M. Palhares and E.M.A.M. Mendes are discussed in Chapter 5. An inductorless Chua’s circuit realization is presented, as well as some practical issues, such as data analysis, mathematical modelling and dynamical characterization, are discussed. The tradeoff among the control objective, the control energy and the model complexity is derived. In Chapter 6, chaos controls for pulse width modulation current mode single phase H-bridge inverters written by B. Robert, M. Feki and H.H.C. Iu are discussed. A time delayed feedback controller is used in conjunction with the proportional controller in its simple form as well as in its extended form to stabilize the desired periodic orbit for larger values of the proportional controller gain. This method is very robust and easy to implement. In Chapter 7, chaos controls for epileptiform bursting in the brain written by M.W. Slutzky, P. Cvitanovic and D.J. Mogul are discussed. Chaos analysis and chaos control algorithms for manipulating the seizure like behaviour in a brain slice model are discussed. The techniques provide a nonlinear control pathway for terminating or potentially preventing epileptic seizures in the whole brain. The third part of the book consists of reviews on general chaos controls for discrete-time systems. In particular, chaos controls for phase lock loops written by A.M. Harb and B.A. Harb are discussed in Chapter 8. A nonlinear controller based on the theory of backstepping is designed so that the phase lock loops will not be out of lock. Also, the phase lock loops will not exhibit Hopf bifurcation and chaotic behaviours. In Chapter 9, chaos controls for sigma delta modulators written by B.W.K. Ling, C.Y.F. Ho and J.D. Reiss are discussed. A fuzzy impulsive control approach is employed for the control of the sigma delta modulators. The local stability criterion and the condition for the occurrence of limit cycle behaviours are derived. Based on the derived conditions, a fuzzy impulsive control law is formulated so that the occurrence of the limit cycle behaviours, the effect of the audio clicks and the distance between the state vectors and an invariant set are minimized supposing that the invariant set is nonempty. The state vectors can be bounded within any arbitrary nonempty region no matter what the input step size, the initial condition and the filter parameters are. The editors are much indebted to the editor of the World Scientific Series on Nonlinear Science, Prof. Leon Chua, and to Senior Editor Miss Lakshmi Narayan for their help and congenial processing of the edition

Constructive Estimates of the Pull-In Range for Synchronization Circuit Described by Integro-Differential Equations

The pull-in range, known also as the acquisition or capture range, is an important characteristics of synchronization circuits such as e.g. phase-, frequency- and delay-locked loops (PLL/FLL/DLL). For PLLs, the pull-in range characterizes the maximal frequency detuning under which the system provides phase locking (mathematically, every solution of the system converges to one of the equilibria). The presence of periodic nonlinearities (characteristics of phase detectors) and infinite sequences of equilibria makes rigorous analysis of PLLs very difficult in spite of their seeming simplicity. The models of PLLs can be featured by multi-stability, hidden attractors and even chaotic trajectories. For this reason, the pull-in range is typically estimated numerically by e.g. using harmonic balance or Galerkin approximations. Analytic results presented in the literature are not numerous and primarily deal with ordinary differential equations. In this paper, we propose an analytic method for pull-in range estimation, applicable to synchronization systems with infinite-dimensional linear part, in particular, for PLLs with delays. The results are illustrated by analysis of a PLL described by second-order delay equations

Digital Communication System with High Security and High Immunity

Today, security issues are increased due to huge data transmissions over communication media such as mobile phones, TV cables, online games, Wi-Fi and satellite transmission etc. for uses such as medical, military or entertainment. This creates a challenge for government and commercial companies to keep these data transmissions secure. Traditional secure ciphers, either block ciphers such as Advanced Encryption Standard (AES) or stream ciphers, are not fast or completely secure. However, the unique properties of a chaotic system, such as structure complexity, deterministic dynamics, random output response and extreme sensitivity to the initial condition, make it motivating for researchers in the field of communication system security. These properties establish an increased relationship between chaos and cryptography that create strong and fast cipher compared to conventional algorithms, which are weak and slow ciphers. Additionally, chaotic synchronisation has sparked many studies on the application of chaos in communication security, for example, the chaotic synchronisation between two different systems in which the transmitter (master system) is driving the receiver (slave system) by its output signal. For this reason, it is essential to design a secure communication system for data transmission in noisy environments that robust to different types of attacks (such as a brute force attack). In this thesis, a digital communication system with high immunity and security, based on a Lorenz stream cipher chaotic signal, has been perfectly applied. A new cryptosystem approach based on Lorenz chaotic systems was designed for secure data transmission. The system uses a stream cipher, in which the encryption key varies continuously in a chaotic manner. Furthermore, one or more of the parameters of the Lorenz generator is controlled by an auxiliary chaotic generator for increased security. In this thesis, the two Lorenz chaotic systems are called the Main Lorenz Generator and the Auxiliary Lorenz Generator. The system was designed using the SIMULINK tool. The system performance in the presence of noise was tested, and the simulation results are provided. Then, the clock-recovery technique is presented, with real-time results of the clock recovery. The receiver demonstrated its ability to recover and lock the clock successfully. Furthermore, the technique for synchronisation between two separate FPGA boards (transmitter and receiver) is detailed, in which the master system transmits specific data to trigger a slave system in order to run synchronously. The real-time results are provided, which show the achieved synchronisation. The receiver was able to recover user data without error, and the real-time results are listed. The randomness test (NIST) results of the Lorenz chaotic signals are also given. Finally, the security analysis determined the system to have a high degree of security compared to other communication systems

Digital Communication System with High Security and High Immunity

Today, security issues are increased due to huge data transmissions over communication media such as mobile phones, TV cables, online games, Wi-Fi and satellite transmission etc. for uses such as medical, military or entertainment. This creates a challenge for government and commercial companies to keep these data transmissions secure. Traditional secure ciphers, either block ciphers such as Advanced Encryption Standard (AES) or stream ciphers, are not fast or completely secure. However, the unique properties of a chaotic system, such as structure complexity, deterministic dynamics, random output response and extreme sensitivity to the initial condition, make it motivating for researchers in the field of communication system security. These properties establish an increased relationship between chaos and cryptography that create strong and fast cipher compared to conventional algorithms, which are weak and slow ciphers. Additionally, chaotic synchronisation has sparked many studies on the application of chaos in communication security, for example, the chaotic synchronisation between two different systems in which the transmitter (master system) is driving the receiver (slave system) by its output signal. For this reason, it is essential to design a secure communication system for data transmission in noisy environments that robust to different types of attacks (such as a brute force attack). In this thesis, a digital communication system with high immunity and security, based on a Lorenz stream cipher chaotic signal, has been perfectly applied. A new cryptosystem approach based on Lorenz chaotic systems was designed for secure data transmission. The system uses a stream cipher, in which the encryption key varies continuously in a chaotic manner. Furthermore, one or more of the parameters of the Lorenz generator is controlled by an auxiliary chaotic generator for increased security. In this thesis, the two Lorenz chaotic systems are called the Main Lorenz Generator and the Auxiliary Lorenz Generator. The system was designed using the SIMULINK tool. The system performance in the presence of noise was tested, and the simulation results are provided. Then, the clock-recovery technique is presented, with real-time results of the clock recovery. The receiver demonstrated its ability to recover and lock the clock successfully. Furthermore, the technique for synchronisation between two separate FPGA boards (transmitter and receiver) is detailed, in which the master system transmits specific data to trigger a slave system in order to run synchronously. The real-time results are provided, which show the achieved synchronisation. The receiver was able to recover user data without error, and the real-time results are listed. The randomness test (NIST) results of the Lorenz chaotic signals are also given. Finally, the security analysis determined the system to have a high degree of security compared to other communication systems

Semiconductor Laser Dynamics

This is a collection of 18 papers, two of which are reviews and seven are invited feature papers, that together form the Photonics Special Issue “Semiconductor Laser Dynamics: Fundamentals and Applications”, published in 2020. This collection is edited by Daan Lenstra, an internationally recognized specialist in the field for 40 years

Synchronising coherent networked radar using low-cost GPS-disciplined oscillators

This text evaluates the feasibility of synchronising coherent, pulsed-Doppler, networked, radars with carrier frequencies of a few gigahertz and moderate bandwidths of tens of megahertz across short baselines of a few kilometres using low-cost quartz GPSDOs based on one-way GPS time transfer. It further assesses the use of line-of-sight (LOS) phase compensation, where the direct sidelobe breakthrough is used as the phase reference, to improve the GPS-disciplined oscillator (GPSDO) synchronised bistatic Doppler performance. Coherent bistatic, multistatic, and networked radars require accurate time, frequency, and phase synchronisation. Global positioning system (GPS) synchronisation is precise, low-cost, passive and covert, and appears well-suited to synchronise networked radar. However, very few published examples exist. An imperfectly synchronised bistatic transmitter-receiver is modelled. Measures and plots are developed enabling the rapid selection of appropriate synchronisation technologies. Three low-cost, open, versatile, and extensible, quartz-based GPSDOs are designed and calibrated at zero-baselines. These GPSDOs are uniquely capable of acquiring phase-lock four times faster than conventional phase-locked loops (PLLs) and a new time synchronisation mechanism enables low-jitter sub-10 ns oneway GPS time synchronisation. In collaboration with University College London, UK, the 2.4 GHz coherent pulsed-Doppler networked radar, called NetRAD, is synchronised using the University of Cape Town developed GPSDOs. This resulted in the first published example of pulsed-Doppler phase synchronisation using GPS. A tri-static experiment is set up in Simon’s Bay, South Africa, with a maximum baseline of 2.3 km. The Roman Rock lighthouse was used as a static target to simultaneously assess the range, frequency, phase, and Doppler performance of the monostatic, bistatic, and LOS phase corrected bistatic returns. The real-world results compare well to that predicted by the earlier developed bistatic model and zero-baseline calibrations. GPS timing limits the radar bandwidth to less than 37.5 MHz when it is required to synchronise to within the range resolution. Low-cost quartz GPSDOs offer adequate frequency synchronisation to ensure a target radial velocity accuracy of better than 1 km/h and frequency drift of less than the Doppler resolution over integration periods of one second or less. LOS phase compensation, when used in combination with low-cost GPSDOs, results in near monostatic pulsed-Doppler performance with a subclutter visibility improvement of about 30 dB