Comparative analysis of partitioned stator flux reversal PM machine and magnetically geared machine operating in Stator-PM and Rotor-PM modes

In this paper, the partitioned stator flux reversal permanent magnet (PM) (PS-FRPM) machine and the conventional magnetically geared (MG) machine operating in both stator-PM (SPM) and rotor-PM (RPM) modes are comparatively analyzed in terms of electromagnetic performance to provide design guides for a MG machine regarding: (a) a SPM or RPM type machine and (b) a higher or lower gear ratio machine. It is found that a SPM type machine is recommended, since both PS-FRPM and MG machines operating in SPM modes have a higher phase back-EMF and hence torque than their RPM counterparts, respectively, as a result of a similar phase flux-linkage but a higher electric frequency since the iron piece number is larger than the PM pole-pair number. Moreover, a smaller gear ratio machine is preferred from the perspective of a higher power factor and hence a lower inverter power rating, as the conventional MG machines with higher gear ratios suffer from larger flux-leakage, higher synchronous reactance and hence lower power factors, as well as higher iron losses, than the PS-FRPM machines. However, higher gear ratio machines feature lower cogging torques and torque ripples due to the smaller difference between the PM pole-pair number and iron piece number. Both prototypes of PS-FRPM machine operating in SPM mode and MG machine operating in RPM mode are built and tested to verify the FE predicted results

NOVEL MODELING, TESTING AND CONTROL APPROACHES TOWARDS ENERGY EFFICIENCY IMPROVEMENT IN PERMANENT MAGNET SYNCHRONOUS MOTOR AND DRIVE SYSTEMS

This thesis investigates energy efficiency improvement in permanent magnet synchronous motor (PMSM) and drive system to achieve high–performance drive for practical industrial and primarily, traction applications. In achieving improved energy efficiency from a system level, this thesis proposes: (1) Accurate modeling and testing of loss components in PMSM considering inverter harmonics; (2) Easy–to–implement, accurate parameter determination techniques to understand variations in motor parameters due to saturation, cross–saturation and temperature; and (3) Control methodologies to improve system level efficiency considering improved loss models and parameter variations. An improved loss model to incorporate the influence of motor–drive interaction on the motor losses is developed by taking time and space harmonics into account. An improved winding function theory incorporating armature reaction fields due to fundamental and harmonic stator magnetic fields is proposed to calculate the additional harmonic losses in the PMSM. Once all contributing losses in the motor are modelled accurately, an investigation into control variables that affect the losses in the motor and inverter is performed. Three major control variables such as DC link voltage, switching frequency and current angle are chosen and the individual losses in the motor and inverter as well as the system losses are studied under varying control variables and wide operating conditions. Since the proposed loss as well as efficiency modeling involves machine operation dependent parameters, the effects of parameter variation on PMSM due to saturation and temperature variation are investigated. A recursive least square (RLS) based multi–parameter estimation is proposed to identify all the varying parameters of the PMSM to improve the accuracy and validity of the proposed model. The impact of losses on these parameters as well as the correct output torque considering the losses are studied. Based on the proposed loss models, parameter variations and the investigation into control variables, an off–line loss minimization procedure is developed to take into account the effects of parameter variations. The search–based procedure generates optimal current angles at varying operating conditions by considering maximization of system efficiency as the objective. In order to further simplify the consideration of parameter variations in real–time conditions, an on–line loss minimization procedure using DC power measurement and loss models solved on–line using terminal measurements in a PMSM drive is proposed. A gradient descent search–based algorithm is used to calculate the optimal current angle corresponding to maximum system efficiency from the input DC power measurement and output power based on the loss models. During the thesis investigations, the proposed models and control techniques are extensively evaluated on a laboratory PMSM drive system under different speeds, load conditions, and temperatures

Electromagnetic Performance Comparison between 12-Phase Switched Flux and Surface-Mounted PM Machines for Direct-Drive Wind Power Generation

In this article, the 12-phase switched flux permanent magnet (PM) (SFPM) machine and three surface-mounted PM (SPM) machines designed for direct-drive wind power generation are comparatively analyzed. First, feasible stator-slot/rotor-pole combinations for symmetrical 12-phase winding layout are investigated for both machine topologies. Second, the key design parameters of the PM generators including the split ratio and stator teeth width ratio are optimized by finite element analysis to achieve a high phase fundamental EMF per turn and a low cogging torque, both of which are desired by the direct-drive wind power generator. Third, electromagnetic performances including air-gap field, cogging torque, static torque, inductance, output voltage and its regulation factor, output power, and efficiency of the generators are compared. A 10-kW 24-slot/22-pole SFPM prototype is built and tested to validate the FE predicted results.</p

Design of High Efficiency Brushless Permanent Magnet Machines and Driver System

The dissertation is concerned with the design of high-efficiency permanent magnet synchronous machinery and the control system. The dissertation first talks about the basic concept of the permanent magnet synchronous motor (PMSM) design and the mathematics design model of the advanced design method. The advantage of the design method is that it can increase the high load capacity at no cost of increasing the total machine size. After that, the control method of the PMSM and Permanent magnet synchronous generator (PMSG) is introduced. The design, simulation, and test of a permanent magnet brushless DC (BLDC) motor for electric impact wrench and new mechanical structure are first presented based on the design method. Finite element analysis based on the Maxwell 2D is built to optimize the design and the control board is designed using Altium Designer. Both the motor and control board have been fabricated and tested to verify the design. The electrical and mechanical design are combined, and it provides an analytical IPMBLDC design method and an innovative and reasonable mechanical dynamical calculation method for the impact wrench system, which can be used in whole system design of other functional electric tools. A 2kw high-efficiency alternator system and its control board system are also designed, analyzed and fabricated applying to the truck auxiliary power unit (APU). The alternator system has two stages. The first stage is that the alternator three-phase outputs are connected to the three-phase active rectifier to get 48V DC. An advanced Sliding Mode Observer (SMO) is used to get an alternator position. The buck is used for the second stage to get 14V DC output. The whole system efficiency is much higher than the traditional system using induction motor

Electromagnetic and Thermal Evaluation of Surface-Mounted PM Vernier Machines

This study investigates the electromagnetic and thermal performance of surface-mounted permanent magnet vernier machines. In particular, different losses and thermal behaviour of PM vernier machines are evaluated considering different gear ratios and the obtained results are compared with a baseline conventional PM machine. In order to have a fair evaluation of the studied machines, the stator and rotor dimensions, as well as current density in the slots, are kept constant, while the stator winding poles and the PM poles mounted on the rotor are varied. The performances of all the machines are evaluated using 2D finite element analyses. Back-EMF, output torque, torque ripple, losses and efficiency are evaluated for the studied machines together with their weight / volume comparison. Finally, thermal analyses are carried out and the impact of temperature on the machines is investigated

Calculation of Magnet Losses in Concentrated-Winding Permanent-Magnet Synchronous Machines Using a Computationally Efficient Finite-Element Method

The proposed hybrid method combines computationally efficient finite-element analysis (CE-FEA) with a new analytical formulation for eddy-current losses in the permanent magnets (PMs) of sine-wave current-regulated brushless synchronous motors. The CE-FEA only employs a reduced set of magnetostatic solutions yielding substantial reductions in the computational time, as compared with the conventional FEA. The 3-D end effects and the effect of pulsewidth-modulation switching harmonics are incorporated in the analytical calculations. The algorithms are applied to two fractional-slot concentrated-winding interior PM motors with different circumferential and axial PM block segmentation arrangements. The method is validated against 2-D and 3-D time-stepping FEA

Mathematical Models for the Design of Electrical Machines

This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations

Investigation of Novel Axial Flux Magnetically Geared Machine

As axial flux permanent magnet (AFPM) machines are currently the most appropriate topologies for limited axial space applications, a novel axial flux magnetically geared permanent magnet (AFMGPM) machine is investigated in this thesis. Based on a yokeless and segmented YASA machine, a new AFMGPM topology was designed and studied. The proposed AFMGPM machine consists of stator segments equipped with concentrated windings and two PM rotors with different pole-pair numbers: a high speed rotor (HSR) and low speed rotor (LSR). The proposed AFMGPM offers the merit of simple mechanical structure and is suitable for applications with limited axial space. Two possible rotor pole combinations were selected and designed with the same stator segments: MG12/5-7 with HSR pole pairs of 5 and LSR pole pairs of 7, and MG12/4-8 with HSR pole pairs of 4 and LSR pole pairs of 8. These were optimised for maximum torque capability. Performance comparisons at no-load and on-load conditions using 3D-finite element analysis (FEM) reveal that the machine torque performance is sensitive to the PM dimensions and better performance can be obtained with the MG12/5-7 topology. It is demonstrated that the MG machines are a valid alternative to the conventional planetary gear function in HEVs. Combining the conventional PM machine with the MG machine has made it possible to replace the power split components using only one electrical device. Additionally, the proposed machine can work as a conventional magnetic gear (MG) and a generator. It is shown that the new AFMGPM machine can realise the function of power split devices in conventional HEVs, as a mechanical planetary gear, motor and generator. It is further shown that the rotor manufacturing tolerance has a significant effect in terms of stator/LSR misalignment on the no-load and on-load performances of the machine. Finally, a performance comparison between the novel machine and the conventional axial flux YASA machine is performed. To validate the predicted results of finite element analysis, a prototype of the new topology and a conventional YASA machine are manufactured and tested. It has, showing that with the benefit of two rotors with different torques and speeds, the new AFMGPM machine has superior performance at all load conditions

The investigation of electromagnetic radial force and associated vibration in permanent magnet synchronous machines

The rising public awareness of climate change and urban air pollution has been one of the key drivers for transport electrification. Such trend drastically accelerates the quest for high-power-and-torque-density electric drive systems. The rare-earth permanent magnet synchronous machine, with its excellent steady-state and dynamic characteristics, has been the ideal candidate for these applications. Specifically, the fractional-slot and concentrated-winding configuration is widely adopted due to its distinctive merits such as short end winding, low torque pulsation, and high efficiency. The vibration and the associated acoustic noise become one of the main parasitic issues of high-performance permanent magnet synchronous drives. These undesirable features mainly arise from mechanical connection failure, imperfect assembly, torque pulsation, and electromagnetic radial and axial force density waves. The high-power-and-torque-density requirement will only be ultimately fulfilled by the reduction of both electromagnetic active material and passive support structure. This results in inflated electromagnetic force density inside the electric machine. Besides, the sti.ness of the machine parts can be compromised and the resultant natural frequencies are significantly brought down. Therefore, the vibration and acoustic noise that are associated with the electromagnetic radial and axial force density waves become a burden for large deployment of these drives. This study is mainly dedicated to the investigation of the electromagnetic radial forced density and its associated vibration and acoustic noise in radial-flux permanent magnet synchronous machines. These machines are usually powered by voltage source inverter with pulse width modulation techniques and various control strategies. Consequently, the vibration problem not only lies on the permanent magnet synchronous machine but also highly relates to its drive and controller. Generally, the electromagnetic radial force density and its relevant vibration can be divided into low-frequency and high-frequency components based on their origins. The low-frequency electromagnetic radial force density waves stem from the magnetic field components by the permanent magnets and armature reaction of fundamental and phase-belt current harmonic components, while the high-frequency ones are introduced by the interactions between the main low-frequency and sideband highfrequency magnetic field components. Both permanent magnets and armature reaction current are the main sources of magnetic field in electric machines. Various drive-level modeling techniques are first reviewed, explored, and developed to evaluate the current harmonic components of the permanent magnet synchronous machine drive. Meanwhile, a simple yet e.ective analytical model is derived to promptly estimate the sideband current harmonic components in the drive with both sinusoidal and space-vector pulse width modulation techniques. An improved analytical method is also proposed to predict the magnetic field from permanent magnets in interior permanent magnet synchronous machines. Moreover, a universal permeance model is analytically developed to obtain the corresponding armature-reaction magnetic field components. With the permanent magnet and armature-reaction magnetic field components, the main electromagnetic radial force density components can be identified and estimated based on Maxwell stress tensor theory. The stator tooth structure has large impacts on both electromagnetic radial force density components and mechanical vibration behaviors. The stator tooth modulation e.ect has been comprehensively demonstrated and explained by both finite element analysis and experimental results. Analytical models of such e.ect are developed for prompt evaluation and insightful revelation. Based on the proposed models, multi-physics approaches are proposed to accurately predict low-frequency and high-frequency electromagnetic radial vibration. Such method is quite versatile and applicable for both integral-slot and fractional-slot concentrated-winding permanent magnet synchronous machines. Comprehensive experimental results are provided to underpin the validity of the proposed models and methods. This study commences on the derivations of the drive parameters such as torque angle, modulation index, and current harmonic components from circuit perspective and further progresses to evaluate and decouple the air-gap magnetic field components from field perspective. It carries on to dwell on the analytical estimations of the main critical electromagnetic radial force density components and stator tooth modulation e.ect. Based on the stator mechanical structure, the corresponding electromagnetic radial vibration and acoustic noise can be accurately predicted. Various analytical models have been developed throughout this study to provide a systematic tool for quick and e.ective investigation of electromagnetic radial force density, the associated vibration and acoustic noise in permanent magnet synchronous machine drive. They have all been rigorously validated by finite element analysis and experimental results. Besides, this study reveals not only a universal approach for electromagnetic radial vibration analysis but also insightful correlations from both machine and drive perspectives