Comparison of next-generation portable pollution monitors to measure exposure to PM2.5 from household air pollution in Puno, Peru.

Assessment of personal exposure to PM2.5 is critical for understanding intervention effectiveness and exposure-response relationships in household air pollution studies. In this pilot study, we compared PM2.5 concentrations obtained from two next-generation personal exposure monitors (the Enhanced Children MicroPEM or ECM; and the Ultrasonic Personal Air Sampler or UPAS) to those obtained with a traditional Triplex Cyclone and SKC Air Pump (a gravimetric cyclone/pump sampler). We co-located cyclone/pumps with an ECM and UPAS to obtain 24-hour kitchen concentrations and personal exposure measurements. We measured Spearmen correlations and evaluated agreement using the Bland-Altman method. We obtained 215 filters from 72 ECM and 71 UPAS co-locations. Overall, the ECM and the UPAS had similar correlation (ECM ρ = 0.91 vs UPAS ρ = 0.88) and agreement (ECM mean difference of 121.7 µg/m3 vs UPAS mean difference of 93.9 µg/m3 ) with overlapping confidence intervals when compared against the cyclone/pump. When adjusted for the limit of detection, agreement between the devices and the cyclone/pump was also similar for all samples (ECM mean difference of 68.8 µg/m3 vs UPAS mean difference of 65.4 µg/m3 ) and personal exposure samples (ECM mean difference of -3.8 µg/m3 vs UPAS mean difference of -12.9 µg/m3 ). Both the ECM and UPAS produced comparable measurements when compared against a cyclone/pump setup

Can climate models capture the structure of extratropical cyclones?

Composites of wind speeds, equivalent potential temperature, mean sea level pressure, vertical velocity, and relative humidity have been produced for the 100 most intense extratropical cyclones in the Northern Hemisphere winter for the 40-yr ECMWF Re-Analysis (ERA-40) and the high resolution global environment model (HiGEM). Features of conceptual models of cyclone structure—the warm conveyor belt, cold conveyor belt, and dry intrusion—have been identified in the composites from ERA-40 and compared to HiGEM. Such features can be identified in the composite fields despite the smoothing that occurs in the compositing process. The surface features and the three-dimensional structure of the cyclones in HiGEM compare very well with those from ERA-40. The warm conveyor belt is identified in the temperature and wind fields as a mass of warm air undergoing moist isentropic uplift and is very similar in ERA-40 and HiGEM. The rate of ascent is lower in HiGEM, associated with a shallower slope of the moist isentropes in the warm sector. There are also differences in the relative humidity fields in the warm conveyor belt. In ERA-40, the high values of relative humidity are strongly associated with the moist isentropic uplift, whereas in HiGEM these are not so strongly associated. The cold conveyor belt is identified as rearward flowing air that undercuts the warm conveyor belt and produces a low-level jet, and is very similar in HiGEM and ERA-40. The dry intrusion is identified in the 500-hPa vertical velocity and relative humidity. The structure of the dry intrusion compares well between HiGEM and ERA-40 but the descent is weaker in HiGEM because of weaker along-isentrope flow behind the composite cyclone. HiGEM’s ability to represent the key features of extratropical cyclone structure can give confidence in future predictions from this model

Can climate models capture the structure of extratropical cyclones?

Composites of wind speeds, equivalent potential temperature, mean sea level pressure, vertical velocity, and relative humidity have been produced for the 100 most intense extratropical cyclones in the Northern Hemisphere winter for the 40-yr ECMWF Re-Analysis (ERA-40) and the high resolution global environment model (HiGEM). Features of conceptual models of cyclone structure—the warm conveyor belt, cold conveyor belt, and dry intrusion—have been identified in the composites from ERA-40 and compared to HiGEM. Such features can be identified in the composite fields despite the smoothing that occurs in the compositing process. The surface features and the three-dimensional structure of the cyclones in HiGEM compare very well with those from ERA-40. The warm conveyor belt is identified in the temperature and wind fields as a mass of warm air undergoing moist isentropic uplift and is very similar in ERA-40 and HiGEM. The rate of ascent is lower in HiGEM, associated with a shallower slope of the moist isentropes in the warm sector. There are also differences in the relative humidity fields in the warm conveyor belt. In ERA-40, the high values of relative humidity are strongly associated with the moist isentropic uplift, whereas in HiGEM these are not so strongly associated. The cold conveyor belt is identified as rearward flowing air that undercuts the warm conveyor belt and produces a low-level jet, and is very similar in HiGEM and ERA-40. The dry intrusion is identified in the 500-hPa vertical velocity and relative humidity. The structure of the dry intrusion compares well between HiGEM and ERA-40 but the descent is weaker in HiGEM because of weaker along-isentrope flow behind the composite cyclone. HiGEM’s ability to represent the key features of extratropical cyclone structure can give confidence in future predictions from this model

Handbook on Climate Change and Disaster Resilient Water, Sanitation and Hygiene Practices

This handbook was developed to help governmental and non-governmental agencies involved in safe water delivery, sanitation hygiene at local level, union and ward disaster management committees, to enhance their respective capacities to cope with climate change and disaster risks. It considers the rural context of Bangladesh and provides field-level workers and practitioners practical ideas about water supply, sanitation and hygiene practices in the context of climate change and disaster risk

Early warning: a people-centred approach to early warning systems and the 'last mile'

The people-centred approach to early warning focuses on how communities can understand threats and avoid them. Disasters are partly caused by external hazards, but they also stem simply from vulnerability: people being in the wrong place without adequate protection. Perhaps the most well-known risk assessment method of recent years is the “vulnerability and capacity assessment”, developed by the Red Cross Red Crescent. There is a consensus that information must extend to communities so as to facilitate their adoption of protective actions. The linking of early warning and early action with development aspirations is what motivates people to engage. Factors as diverse as knowledge, power, culture, environment, lifestyle and personality often determine whether people heed warnings. Engaging people outside any warning system is called the “last mile” – a term that expresses the sentiment that warnings often do not reach those who need them most. Addressing vulnerability in disaster reduction is often similar to promoting development, but in the developed world “top-down” approaches to risk assessment and early warning dominate

CYCLONE Unified Deployment and Management of Federated, Multi-Cloud Applications

Various Cloud layers have to work in concert in order to manage and deploy complex multi-cloud applications, executing sophisticated workflows for Cloud resource deployment, activation, adjustment, interaction, and monitoring. While there are ample solutions for managing individual Cloud aspects (e.g. network controllers, deployment tools, and application security software), there are no well-integrated suites for managing an entire multi cloud environment with multiple providers and deployment models. This paper presents the CYCLONE architecture that integrates a number of existing solutions to create an open, unified, holistic Cloud management platform for multi-cloud applications, tailored to the needs of research organizations and SMEs. It discusses major challenges in providing a network and security infrastructure for the Intercloud and concludes with the demonstration how the architecture is implemented in a real life bioinformatics use case

Dangerous calling, the life-and-death matter of safety at sea: a collection of articles from SAMUDRA Report

Fishing is arguably the world's most dangerous vocation, reporting the highest rate of occupational fatalities among industries, made only worse by declining fish prices, overfished waters and shortened fishing seasons. As fishermen are forced to move farther away from shore in search of scarce resources, the dangers they face are many: bad weather, rough seas, flooding, fire, poor vessel design, mechanical problems navigational error, missing safety equipment. For the small-scale and artisanal fishers of developing countries, these problems are compounded several times over, as this series of articles from SAMUDRA Report reveals. (44pp.

Capacity-building activities related to climate change vulnerability and adaptation assessment and economic valuation for Fiji

The Terms of Reference for this work specified three objectives to the Fiji component: Objective 1a: to provide a prototype FIJICLIM model (covered under PICCAP funding) Objective 1b: to provide training and transfer of FIJICLIM Objective 1c: to present and evaluate World Bank study findings and to identify future directions for development and use of FIJICLIM (2-day workshop) Proceedings of the training course and workshop were prepared by the Fiji Department of Environment. The summaries from these proceedings reflect a very high degree of success with the contracted activities