NASA Tech Briefs, September 2011

Topics covered include: Fused Reality for Enhanced Flight Test Capabilities; Thermography to Inspect Insulation of Large Cryogenic Tanks; Crush Test Abuse Stand; Test Generator for MATLAB Simulations; Dynamic Monitoring of Cleanroom Fallout Using an Air Particle Counter; Enhancement to Non-Contacting Stress Measurement of Blade Vibration Frequency; Positively Verifying Mating of Previously Unverifiable Flight Connectors; Radiation-Tolerant Intelligent Memory Stack - RTIMS; Ultra-Low-Dropout Linear Regulator; Excitation of a Parallel Plate Waveguide by an Array of Rectangular Waveguides; FPGA for Power Control of MSL Avionics; UAVSAR Active Electronically Scanned Array; Lockout/Tagout (LOTO) Simulator; Silicon Carbide Mounts for Fabry-Perot Interferometers; Measuring the In-Process Figure, Final Prescription, and System Alignment of Large; Optics and Segmented Mirrors Using Lidar Metrology; Fiber-Reinforced Reactive Nano-Epoxy Composites; Polymerization Initiated at the Sidewalls of Carbon Nanotubes; Metal-Matrix/Hollow-Ceramic-Sphere Composites; Piezoelectrically Enhanced Photocathodes; Iridium-Doped Ruthenium Oxide Catalyst for Oxygen Evolution; Improved Mo-Re VPS Alloys for High-Temperature Uses; Data Service Provider Cost Estimation Tool; Hybrid Power Management-Based Vehicle Architecture; Force Limit System; Levitated Duct Fan (LDF) Aircraft Auxiliary Generator; Compact, Two-Sided Structural Cold Plate Configuration; AN Fitting Reconditioning Tool; Active Response Gravity Offload System; Method and Apparatus for Forming Nanodroplets; Rapid Detection of the Varicella Zoster Virus in Saliva; Improved Devices for Collecting Sweat for Chemical Analysis; Phase-Controlled Magnetic Mirror for Wavefront Correction; and Frame-Transfer Gating Raman Spectroscopy for Time-Resolved Multiscalar Combustion Diagnostics

Developing a distributed electronic health-record store for India

The DIGHT project is addressing the problem of building a scalable and highly available information store for the Electronic Health Records (EHRs) of the over one billion citizens of India

Small business innovation research. Abstracts of completed 1987 phase 1 projects

Non-proprietary summaries of Phase 1 Small Business Innovation Research (SBIR) projects supported by NASA in the 1987 program year are given. Work in the areas of aeronautical propulsion, aerodynamics, acoustics, aircraft systems, materials and structures, teleoperators and robotics, computer sciences, information systems, spacecraft systems, spacecraft power supplies, spacecraft propulsion, bioastronautics, satellite communication, and space processing are covered

Engineering Resilient Space Systems

Several distinct trends will influence space exploration missions in the next decade. Destinations are becoming more remote and mysterious, science questions more sophisticated, and, as mission experience accumulates, the most accessible targets are visited, advancing the knowledge frontier to more difficult, harsh, and inaccessible environments. This leads to new challenges including: hazardous conditions that limit mission lifetime, such as high radiation levels surrounding interesting destinations like Europa or toxic atmospheres of planetary bodies like Venus; unconstrained environments with navigation hazards, such as free-floating active small bodies; multielement missions required to answer more sophisticated questions, such as Mars Sample Return (MSR); and long-range missions, such as Kuiper belt exploration, that must survive equipment failures over the span of decades. These missions will need to be successful without a priori knowledge of the most efficient data collection techniques for optimum science return. Science objectives will have to be revised ‘on the fly’, with new data collection and navigation decisions on short timescales. Yet, even as science objectives are becoming more ambitious, several critical resources remain unchanged. Since physics imposes insurmountable light-time delays, anticipated improvements to the Deep Space Network (DSN) will only marginally improve the bandwidth and communications cadence to remote spacecraft. Fiscal resources are increasingly limited, resulting in fewer flagship missions, smaller spacecraft, and less subsystem redundancy. As missions visit more distant and formidable locations, the job of the operations team becomes more challenging, seemingly inconsistent with the trend of shrinking mission budgets for operations support. How can we continue to explore challenging new locations without increasing risk or system complexity? These challenges are present, to some degree, for the entire Decadal Survey mission portfolio, as documented in Vision and Voyages for Planetary Science in the Decade 2013–2022 (National Research Council, 2011), but are especially acute for the following mission examples, identified in our recently completed KISS Engineering Resilient Space Systems (ERSS) study: 1. A Venus lander, designed to sample the atmosphere and surface of Venus, would have to perform science operations as components and subsystems degrade and fail; 2. A Trojan asteroid tour spacecraft would spend significant time cruising to its ultimate destination (essentially hibernating to save on operations costs), then upon arrival, would have to act as its own surveyor, finding new objects and targets of opportunity as it approaches each asteroid, requiring response on short notice; and 3. A MSR campaign would not only be required to perform fast reconnaissance over long distances on the surface of Mars, interact with an unknown physical surface, and handle degradations and faults, but would also contain multiple components (launch vehicle, cruise stage, entry and landing vehicle, surface rover, ascent vehicle, orbiting cache, and Earth return vehicle) that dramatically increase the need for resilience to failure across the complex system. The concept of resilience and its relevance and application in various domains was a focus during the study, with several definitions of resilience proposed and discussed. While there was substantial variation in the specifics, there was a common conceptual core that emerged—adaptation in the presence of changing circumstances. These changes were couched in various ways—anomalies, disruptions, discoveries—but they all ultimately had to do with changes in underlying assumptions. Invalid assumptions, whether due to unexpected changes in the environment, or an inadequate understanding of interactions within the system, may cause unexpected or unintended system behavior. A system is resilient if it continues to perform the intended functions in the presence of invalid assumptions. Our study focused on areas of resilience that we felt needed additional exploration and integration, namely system and software architectures and capabilities, and autonomy technologies. (While also an important consideration, resilience in hardware is being addressed in multiple other venues, including 2 other KISS studies.) The study consisted of two workshops, separated by a seven-month focused study period. The first workshop (Workshop #1) explored the ‘problem space’ as an organizing theme, and the second workshop (Workshop #2) explored the ‘solution space’. In each workshop, focused discussions and exercises were interspersed with presentations from participants and invited speakers. The study period between the two workshops was organized as part of the synthesis activity during the first workshop. The study participants, after spending the initial days of the first workshop discussing the nature of resilience and its impact on future science missions, decided to split into three focus groups, each with a particular thrust, to explore specific ideas further and develop material needed for the second workshop. The three focus groups and areas of exploration were: 1. Reference missions: address/refine the resilience needs by exploring a set of reference missions 2. Capability survey: collect, document, and assess current efforts to develop capabilities and technology that could be used to address the documented needs, both inside and outside NASA 3. Architecture: analyze the impact of architecture on system resilience, and provide principles and guidance for architecting greater resilience in our future systems The key product of the second workshop was a set of capability roadmaps pertaining to the three reference missions selected for their representative coverage of the types of space missions envisioned for the future. From these three roadmaps, we have extracted several common capability patterns that would be appropriate targets for near-term technical development: one focused on graceful degradation of system functionality, a second focused on data understanding for science and engineering applications, and a third focused on hazard avoidance and environmental uncertainty. Continuing work is extending these roadmaps to identify candidate enablers of the capabilities from the following three categories: architecture solutions, technology solutions, and process solutions. The KISS study allowed a collection of diverse and engaged engineers, researchers, and scientists to think deeply about the theory, approaches, and technical issues involved in developing and applying resilience capabilities. The conclusions summarize the varied and disparate discussions that occurred during the study, and include new insights about the nature of the challenge and potential solutions: 1. There is a clear and definitive need for more resilient space systems. During our study period, the key scientists/engineers we engaged to understand potential future missions confirmed the scientific and risk reduction value of greater resilience in the systems used to perform these missions. 2. Resilience can be quantified in measurable terms—project cost, mission risk, and quality of science return. In order to consider resilience properly in the set of engineering trades performed during the design, integration, and operation of space systems, the benefits and costs of resilience need to be quantified. We believe, based on the work done during the study, that appropriate metrics to measure resilience must relate to risk, cost, and science quality/opportunity. Additional work is required to explicitly tie design decisions to these first-order concerns. 3. There are many existing basic technologies that can be applied to engineering resilient space systems. Through the discussions during the study, we found many varied approaches and research that address the various facets of resilience, some within NASA, and many more beyond. Examples from civil architecture, Department of Defense (DoD) / Defense Advanced Research Projects Agency (DARPA) initiatives, ‘smart’ power grid control, cyber-physical systems, software architecture, and application of formal verification methods for software were identified and discussed. The variety and scope of related efforts is encouraging and presents many opportunities for collaboration and development, and we expect many collaborative proposals and joint research as a result of the study. 4. Use of principled architectural approaches is key to managing complexity and integrating disparate technologies. The main challenge inherent in considering highly resilient space systems is that the increase in capability can result in an increase in complexity with all of the 3 risks and costs associated with more complex systems. What is needed is a better way of conceiving space systems that enables incorporation of capabilities without increasing complexity. We believe principled architecting approaches provide the needed means to convey a unified understanding of the system to primary stakeholders, thereby controlling complexity in the conception and development of resilient systems, and enabling the integration of disparate approaches and technologies. A representative architectural example is included in Appendix F. 5. Developing trusted resilience capabilities will require a diverse yet strategically directed research program. Despite the interest in, and benefits of, deploying resilience space systems, to date, there has been a notable lack of meaningful demonstrated progress in systems capable of working in hazardous uncertain situations. The roadmaps completed during the study, and documented in this report, provide the basis for a real funded plan that considers the required fundamental work and evolution of needed capabilities. Exploring space is a challenging and difficult endeavor. Future space missions will require more resilience in order to perform the desired science in new environments under constraints of development and operations cost, acceptable risk, and communications delays. Development of space systems with resilient capabilities has the potential to expand the limits of possibility, revolutionizing space science by enabling as yet unforeseen missions and breakthrough science observations. Our KISS study provided an essential venue for the consideration of these challenges and goals. Additional work and future steps are needed to realize the potential of resilient systems—this study provided the necessary catalyst to begin this process

NASA Tech Briefs, December 2012

The topics include: Pattern Generator for Bench Test of Digital Boards; 670-GHz Down- and Up-Converting HEMT-Based Mixers; Lidar Electro-Optic Beam Switch with a Liquid Crystal Variable Retarder; Feedback Augmented Sub-Ranging (FASR) Quantizer; Real-Time Distributed Embedded Oscillator Operating Frequency Monitoring; Software Modules for the Proximity-1 Space Link Interleaved Time Synchronization (PITS) Protocol; Description and User Instructions for the Quaternion to Orbit v3 Software; AdapChem; Mars Relay Lander and Orbiter Overflight Profile Estimation; Extended Testability Analysis Tool; Interactive 3D Mars Visualization; Rapid Diagnostics of Onboard Sequences; MER Telemetry Processor; pyam: Python Implementation of YaM; Process for Patterning Indium for Bump Bonding; Archway for Radiation and Micrometeorite Occurrence Resistance; 4D Light Field Imaging System Using Programmable Aperture; Device and Container for Reheating and Sterilization; Radio Frequency Plasma Discharge Lamps for Use as Stable Calibration Light Sources; Membrane Shell Reflector Segment Antenna; High-Speed Transport of Fluid Drops and Solid Particles via Surface Acoustic Waves; Compact Autonomous Hemispheric Vision System; A Distributive, Non-Destructive, Real-Time Approach to Snowpack Monitoring; Wideband Single-Crystal Transducer for Bone Characterization; Numerical Simulation of Rocket Exhaust Interaction With Lunar Soil; Motion Imagery and Robotics Application (MIRA): Standards-Based Robotics; Particle Filtering for Model-Based Anomaly Detection in Sensor Networks; Ka-band Digitally Beamformed Airborne Radar Using SweepSAR Technique; Composite With In Situ Plenums; Multi-Beam Approach for Accelerating Alignment and Calibration of HyspIRI-Like Imaging Spectrometers; JWST Lifting System; Next-Generation Tumbleweed Rover; Pneumatic System for Concentration of Micrometer-Size Lunar Soil

Overcoming Noise in Entanglement Distribution

Noise can be considered the natural enemy of quantum information. An often implied benefit of high-dimensional entanglement is its increased resilience to noise. However, manifesting this potential in an experimentally meaningful fashion is challenging and has never been done before. In infinite dimensional spaces, discretisation is inevitable and renders the effective dimension of quantum states a tunable parameter. Owing to advances in experimental techniques and theoretical tools, we demonstrate an increased resistance to noise by identifying two pathways to exploit high-dimensional entangled states. Our study is based on two separate experiments utilising canonical spatio-temporal properties of entangled photon pairs. Following these different pathways to noise resilience, we are able to certify entanglement in the photonic orbital-angular-momentum and energy-time degrees of freedom up to noise conditions corresponding to a noise fraction of 72 % and 92 % respectively. Our work paves the way towards practical quantum communication systems that are able to surpass current noise and distance limitations, while not compromising on potential device-independence.Comment: 12 pages main text, 7 pages supplementary information, 6 figure

Analysis of MVD and color edge detection for depth maps enhacement

Prjecte final de carrera realitzat en col.laboració amb Fraunhofer Heinrich Hertz InstituteMVD (Multiview Video plus Depth) data consists of two components: color video and depth maps sequences. Depth maps represent the spatial arrangement (or three dimensional geometry) of the scene. The MVD representation is used for rendering virtual views in FVV (Free Viewpoint Video) and for 3DTV (3-dimensional TeleVision) applications. Distortions of the silhouettes of objects in the depth maps are a problem when rendering a stereo video pair. This Master thesis presents a system to improve the depth component of MVD . For this purpose, it introduces a new method called correlation histograms for analyzing the two components of depth-enhanced 3D video representations with special emphasis on the improved depth component. This document gives a description of this new method and presents an analysis of six di erent MVD data sets with di erent features. Moreover, a modular and exible system for improving depth maps is introduced. The idea behind is to use the color video component for extracting edges of the scene and to re-shape the depth component according to the edge information. The mentioned system basically describes a framework. Hence, it is capable to admit changes on speci c tasks if the concrete target is respected. After the improvement process, the MVD data is analyzed again via correlation histograms in order to obtain characteristics of the depth improvement. The achieved results show that correlation histograms are a good method for analyzing the impact of processing MVD data. It is also con rmed that the presented system is modular and exible, as it works with three di erent degrees of change, introducing modi cations in depth maps, according to the input characteristics. Hence, this system can be used as a framework for depth map improvement. The results show that contours with 1-pixel width jittering in depth maps have been correctly re-shaped. Additionally, constant background and foreground areas of depth maps have also been improved according to the degree of change, attaining better results in terms of temporal consistency. However, future work can focus on unresolved problems, such as jittering with more than one pixel width or by making the system more dynamic

Vector magnetometer design study: Analysis of a triaxial fluxgate sensor design demonstrates that all MAGSAT Vector Magnetometer specifications can be met

The design of the vector magnetometer selected for analysis is capable of exceeding the required accuracy of 5 gamma per vector field component. The principal elements that assure this performance level are very low power dissipation triaxial feedback coils surrounding ring core flux-gates and temperature control of the critical components of two-loop feedback electronics. An analysis of the calibration problem points to the need for improved test facilities

Product assurance technology for custom LSI/VLSI electronics

The technology for obtaining custom integrated circuits from CMOS-bulk silicon foundries using a universal set of layout rules is presented. The technical efforts were guided by the requirement to develop a 3 micron CMOS test chip for the Combined Release and Radiation Effects Satellite (CRRES). This chip contains both analog and digital circuits. The development employed all the elements required to obtain custom circuits from silicon foundries, including circuit design, foundry interfacing, circuit test, and circuit qualification

Rotorcraft Blade Angle Calibration Methods

The most vital system of a rotorcraft is the rotor system due to its effects on the overall flight quality of the vehicle. Therefore, it is of importance to be able to accurately determine blade position during flight so that fine adjustments can be made to ensure a safe and efficient flight. In this study, a current calibration method focusing on the pitch, flap, and lead-lag blade angles is analyzed and found to have larger than acceptable error associated with the sensor calibrations. A literature review is conducted which reveals four novel methods that can potentially increase the accuracy of the sensor calibrations. An uncertainty analysis is conducted aiding in the decision of which of the four methods would best improve the calibration accuracy. The results conclude that a simpler method can be applied and calibration times can greatly be reduced while increasing the accuracy of the calibration. Finally, a new calibration method is proposed utilizing the newly chosen sensor that can be later implemented into the system