Analog MAP decoder for (8, 4) hamming code in subthreshold CMOS

Journal ArticleAn all-MOS analog implementation of a MAP decoder is presented for the (8, 4) extended Hamming code. This paper describes the design and analysis of a tail-biting trellis decoder implementation using subthreshold CMOS devices. A VLSI test chip has recently returned from fabrication, and preliminary test results indicate accurate decoding up to 20 MBit/s

Analog MAP decoder for (8, 4) hamming code in subthreshold CMOS

Journal ArticleAbstract - An all-MOS analog tail-biting MAP decoder is presented for an (8,4) Hamming code. The decoder implements a probability propagation algorithm using subthreshold CMOS networks. Physical results verify the expected behavior of the decoderand demonstrate robustness of analog decoding circuits

CMOS analog map decoder for (8,4) hamming code

Journal ArticleAbstract-Design and test results for a fully integrated translinear tail-biting MAP error-control decoder are presented. Decoder designs have been reported for various applications which make use of analog computation, mostly for Viterbi-style decoders. MAP decoders are more complex, and are necessary components of powerful iterative decoding systems such as Turbo codes. Analog circuits may require less area and power than digital implementations in high-speed iterative applications. Our (8, 4) Hamming decoder, implemented in an AMI 0.5- m process, is the first functioning CMOS analog MAP decoder. While designed to operate in subthreshold, the decoder also functions above threshold with a small performance penalty. The chip has been tested at bit rates up to 2 Mb/s, and simulations indicate a top speed of about 10 Mb/s in strong inversion. The decoder circuit size is 0.82 mm2, and typical power consumption is 1 mW at 1 Mb/s

Analog MAP decoder for (8,4) hamming code in subthreshold CMOS

Journal ArticleAn all-MOS analog tail-biting MAP decoder is presented for an (8,4) Hamming code. The decoder implements a probability propagation algorithm using subthreshold CMOS networks. Physical results verify the expected behavior of the decoder and demonstrate robustness of analog decoding circuits

Analog decoding of product codes

Journal ArticleAbstract - A method is presented for analog softdecision decoding of block product codes (block turbo codes). Extrinsic information is exchanged as analog signals between component row and column decoders. The component MAP decoders use low-power analog computation in subthreshold CMOS circuits to implement the sum-product algorithm. An example decoder design is presented for a (16,ll)? Hamming code

Low Power Decoding Circuits for Ultra Portable Devices

A wide spread of existing and emerging battery driven wireless devices do not necessarily demand high data rates. Rather, ultra low power, portability and low cost are the most desired characteristics. Examples of such applications are wireless sensor networks (WSN), body area networks (BAN), and a variety of medical implants and health-care aids. Being small, cheap and low power for the individual transceiver nodes, let those to be used in abundance in remote places, where access for maintenance or recharging the battery is limited. In such scenarios, the lifetime of the battery, in most cases, determines the lifetime of the individual nodes. Therefore, energy consumption has to be so low that the nodes remain operational for an extended period of time, even up to a few years. It is known that using error correcting codes (ECC) in a wireless link can potentially help to reduce the transmit power considerably. However, the power consumption of the coding-decoding hardware itself is critical in an ultra low power transceiver node. Power and silicon area overhead of coding-decoding circuitry needs to be kept at a minimum in the total energy and cost budget of the transceiver node. In this thesis, low power approaches in decoding circuits in the framework of the mentioned applications and use cases are investigated. The presented work is based on the 65nm CMOS technology and is structured in four parts as follows: In the first part, goals and objectives, background theory and fundamentals of the presented work is introduced. Also, the ECC block in coordination with its surrounding environment, a low power receiver chain, is presented. Designing and implementing an ultra low power and low cost wireless transceiver node introduces challenges that requires special considerations at various levels of abstraction. Similarly, a competitive solution often occurs after a conclusive design space exploration. The proposed decoder circuits in the following parts are designed to be embedded in the low power receiver chain, that is introduced in the first part. Second part, explores analog decoding method and its capabilities to be embedded in a compact and low power transceiver node. Analog decod- ing method has been theoretically introduced over a decade ago that followed with early proof of concept circuits that promised it to be a feasible low power solution. Still, with the increased popularity of low power sensor networks, it has not been clear how an analog decoding approach performs in terms of power, silicon area, data rate and integrity of calculations in recent technologies and for low data rates. Ultra low power budget, small size requirement and more relaxed demands on data rates suggests a decoding circuit with limited complexity. Therefore, the four-state (7,5) codes are considered for hardware implementation. Simulations to chose the critical design factors are presented. Consequently, to evaluate critical specifications of the decoding circuit, three versions of analog decoding circuit with different transistor dimensions fabricated. The measurements results reveal different trade-off possibilities as well as the potentials and limitations of the analog decoding approach for the target applications. Measurements seem to be crucial, since the available computer-aided design (CAD) tools provide limited assistance and precision, given the amount of calculations and parameters that has to be included in the simulations. The largest analog decoding core (AD1) takes 0.104mm2 on silicon and the other two (AD2 and AD3) take 0.035mm2 and 0.015mm2, respectively. Consequently, coding gain in trade-off with silicon area and throughput is presented. The analog decoders operate with 0.8V supply. The achieved coding gain is 2.3 dB at bit error rates (BER)=0.001 and 10 pico-Joules per bit (pJ/b) energy efficiency is reached at 2 Mbps. Third part of this thesis, proposes an alternative low power digital decoding approach for the same codes. The desired compact and low power goal has been pursued by designing an equivalent digital decoding circuit that is fabricated in 65nm CMOS technology and operates in low voltage (near-threshold) region. The architecture of the design is optimized in system and circuit levels to propose a competitive digital alternative. Similarly, critical specifications of the decoder in terms of power, area, data rate (speed) and integrity are reported according to the measurements. The digital implementation with 0.11mm2 area, consumes minimum energy at 0.32V supply which gives 9 pJ/b energy efficiency at 125 kb/s and 2.9 dB coding gain at BER=0.001. The forth and last part, compares the proposed design alternatives based on the fabricated chips and the results attained from the measurements to conclude the most suitable solution for the considered target applications. Advantages and disadvantages of both approaches are discussed. Possible extensions of this work is introduced as future work

Analog decoding of product codes

Journal ArticleA design approach is presented for soft-decision decoding of block product codes ("block turbo codes") using analog computation with MOS devices. Application of analog decoding to large code sizes is also considered with the introduction of serial analog interfaces and pipeline schedules

Analog decoding of product codes

Journal ArticleA design approach is presented for soft-decision decoding of block product codes ("block turbo codes") using analog computation with MOS devices. Application of analog decoding to large code sizes is also considered with the introduction of serial analog interfaces and pipeline schedules

Cell library for automatic synthesis of analog error control decoders

Journal ArticleThis paper presents a cell library for automatic synthesis of analog error control decoders. By using some basic cells, analog ermr control decoders can be automatically synthesized. Also, using automatic synthesis based on this cell library, the circuit performance is not degraded and the circuit is smaller and lower power compared with corresponding canonical designs

Cell library for automatic synthesis of analog error control decoders

Journal ArticleThis paper presents a cell library for automatic synthesis of analog error control decoders. By using some basic cells, analog ermr control decoders can be automatically synthesized. Also, using automatic synthesis based on this cell library, the circuit performance is not degraded and the circuit is smaller and lower power compared with corresponding canonical designs