41 research outputs found
Issues in providing a reliable multicast facility
Issues involved in point-to-multipoint communication are presented and the literature for proposed solutions and approaches surveyed. Particular attention is focused on the ideas and implementations that align with the requirements of the environment of interest. The attributes of multicast receiver groups that might lead to useful classifications, what the functionality of a management scheme should be, and how the group management module can be implemented are examined. The services that multicasting facilities can offer are presented, followed by mechanisms within the communications protocol that implements these services. The metrics of interest when evaluating a reliable multicast facility are identified and applied to four transport layer protocols that incorporate reliable multicast
Comparative Study Of The VMTP, XTP, and TP4 Protocols And Their Functionalities From The Perspective Of The OSI Reference Model: Investigation Of OSI Protocols For Distributed Interactive Simulation
Report presents a comparative study of three communication protocols at the transport layer of the communication protocol stack, focusing on the similarities and differences of these three protocols in terms of transport layer functions
The influence of protocol choice on network performance
Bibliography: leaves 100-102.Computer communication networks are a vital link in providing many of the services that we use daily, and our reliance on these networks is on the increase. The growing use of networks is driving network design towards greater performance. The greater need for network connectivity and increased performance makes the study of network performance constraints important. Networks consist of both hardware and software components. Currently great advances are being made in network hardware, resulting in advances in the available raw network performance. In this thesis, I will show through measurement that it is difficult to harness all the raw performance and to make it available to carry network services. I will also identify some of the factors limiting the full utilization of a high speed network
Recommended from our members
Computing infrastructure issues in distributed communications systems : a survey of operating system transport system architectures
The performance of distributed applications (such as file transfer, remote login, tele-conferencing, full-motion video, and scientific visualization) is influenced by several factors that interact in complex ways. In particular, application performance is significantly affected both by communication infrastructure factors and computing infrastructure factors. Several communication infrastructure factors include channel speed, bit-error rate, and congestion at intermediate switching nodes. Computing infrastructure factors include (among other things) both protocol processing activities (such as connection management, flow control, error detection, and retransmission) and general operating system factors (such as memory latency, CPU speed, interrupt and context switching overhead, process architecture, and message buffering). Due to a several orders of magnitude increase in network channel speed and an increase in application diversity, performance bottlenecks are shifting from the network factors to the transport system factors.This paper defines an abstraction called an "Operating System Transport System Architecture" (OSTSA) that is used to classify the major components and services in the computing infrastructure. End-to-end network protocols such as TCP, TP4, VMTP, XTP, and Delta-t typically run on general-purpose computers, where they utilize various operating system resources such as processors, virtual memory, and network controllers. The OSTSA provides services that integrate these resources to support distributed applications running on local and wide area networks.A taxonomy is presented to evaluate OSTSAs in terms of their support for protocol processing activities. We use this taxonomy to compare and contrast five general-purpose commercial and experimental operating systems including System V UNIX, BSD UNIX, the x-kernel, Choices, and Xinu
XTP for the NASA space station
The NASA Space Station is a truly international effort; therefore, its communications systems must conform to established international standards. Thus, NASA is requiring that each network-interface unit implement a full suite of ISO protocols. However, NASA is understandably concerned that a full ISO stack will not deliver performance consistent with the real-time demands of Space Station control systems. Therefore, as a research project, the suitability of the Xpress transfer protocol (XTP) is investigated along side a full ISO stack. The initial plans for implementing XTP and comparing its performance to ISO TP4 are described
The Xpress Transfer Protocol (XTP): A tutorial (expanded version)
The Xpress Transfer Protocol (XTP) is a reliable, real-time, light weight transfer layer protocol. Current transport layer protocols such as DoD's Transmission Control Protocol (TCP) and ISO's Transport Protocol (TP) were not designed for the next generation of high speed, interconnected reliable networks such as fiber distributed data interface (FDDI) and the gigabit/second wide area networks. Unlike all previous transport layer protocols, XTP is being designed to be implemented in hardware as a VLSI chip set. By streamlining the protocol, combining the transport and network layers and utilizing the increased speed and parallelization possible with a VLSI implementation, XTP will be able to provide the end-to-end data transmission rates demanded in high speed networks without compromising reliability and functionality. This paper describes the operation of the XTP protocol and in particular, its error, flow and rate control; inter-networking addressing mechanisms; and multicast support features, as defined in the XTP Protocol Definition Revision 3.4
Performance Analysis of Dynamic Routing Protocols in a Low Earth Orbit Satellite Data Network
Modern warfare is placing an increasing reliance on global communications. Currently under development are several Low Earth Orbit (LEO) satellite systems that propose to deliver voice and data traffic to subscribers anywhere on the globe. However, very little is known about the performance of conventional routing protocols under orbital conditions where the topology changes on a scale of minutes rather than days. This thesis compares two routing protocols in a LEO environment. One (Extended Bellman-Ford) is a conventional terrestrial routing protocol, while the other (Darting) is a new protocol which has been proposed as suitable for use in LEO networks. These protocols are compared via computer simulation in two of the proposed LEO systems (Globalstar and Iridium), under various traffic intensities. Comparative measures of packet delay, convergence speed, and protocol overhead are made It was found both protocols were roughly equivalent in end-to-end delay characteristics, though the Darting protocol had a much higher overhead load and demonstrated higher instability at network update periods. For example, while steady state end-to-end delays were within a few milliseconds, in one case Darting showed an increase of 764% in convergence time over Extended Bellman-Ford with an increase of 149% in overhead. Over all cases, Darting required an average of 72.1% more overhead than Extended Bellman-Ford to perform the same work. Darting was handicapped by its strong correlation between data traffic and protocol overhead. Modifications to reduce this overhead would result in much closer performance
Multilevel Parallel Communications
The research reported in this thesis investigates the use of parallelism at multiple levels to realize high-speed networks that offer advantages in throughput, cost, reliability, and flexibility over alternative approaches. This research specifically considers use of parallelism at two levels: the upper level and the lower level. At the upper level, N protocol processors perform functions included in the transport and network layers. At the lower level, M channels provide data and physical layer functions. The resulting system provides very high bandwidth to an application. A key concept of this research is the use of replicated channels to provide a single, high bandwidth channel to a single application. The parallelism provided by the network is transparent to communicating applications, thus differentiating this strategy from schemes that provide a collection of disjoint channels between applications on different nodes. Another innovative aspect of this research is that parallelism is exploited at multiple layers of the network to provide high throughput not only at the physical layer, but also at upper protocol layers. Schedulers are used to distribute data from a single stream to multiple channels and to merge data from multiple channels to reconstruct a single coherent stream. High throughput is possible by providing the combined bandwidth of multiple channels to a single source and destination through use of parallelism at multiple protocol layers. This strategy is cost effective since systems can be built using standard technologies that benefit from the economies of a broad applications base. The exotic and revolutionary components needed in non-parallel approaches to build high speed networks are not required. The replicated channels can be used to achieve high reliability as well. Multilevel parallelism is flexible since the degree of parallelism provided at any level can be matched to protocol processing demands and application requirements