Architecture, design and source code comparison of ns-2 and ns-3 network simulators

Ns-2 and its successor ns-3 are discrete-event simulators. Ns- 3 is still under development, but offers some interesting characteristics for developers while ns-2 still has a big user base. This paper remarks current differences between both tools from developers point of view. Leaving performance and resources consumption aside, technical issues described in the present paper might help to choose one or another alternative depending of simulation and project management requirements.Ministerio de Educación y Ciencia TIN2006-15617-C03-03Junta de Andalucía P06-TIC-229

Process Mining Handbook

This is an open access book. This book comprises all the single courses given as part of the First Summer School on Process Mining, PMSS 2022, which was held in Aachen, Germany, during July 4-8, 2022. This volume contains 17 chapters organized into the following topical sections: Introduction; process discovery; conformance checking; data preprocessing; process enhancement and monitoring; assorted process mining topics; industrial perspective and applications; and closing

Basic set of behaviours for programming assembly robots

We know from the well established Church-Turing thesis that any computer program­ming language needs just a limited set of commands in order to perform any computable process. However, programming in these terms is so very inconvenient that a larger set of machine codes need to be introduced and on top of these higher programming languages are erected.In Assembly Robotics we could theoretically formulate any assembly task, in terms of moves. Nevertheless, it is as tedious and error prone to program assemblies at this low level as it would be to program a computer by using just Turing Machine commands.An interesting survey carried out in the beginning of the nineties showed that the most common assembly operations in manufacturing industry cluster in just seven classes. Since the research conducted in this thesis is developed within the behaviour-based assembly paradigm which views every assembly task as the external manifestation of the execution of a behavioural module, we wonder whether there exists a limited and ergonomical set of elementary modules with which to program at least 80% of the most common operations.IIn order to investigate such a problem, we set a project in which, taking into account the statistics of the aforementioned survey, we analyze the experimental behavioural decomposition of three significant assembly tasks (two similar benchmarks, the STRASS assembly, and a family of torches). From these three we establish a basic set of such modules.The three test assemblies with which we ran the experiments can not possibly exhaust ah the manufacturing assembly tasks occurring in industry, nor can the results gathered or the speculations made represent a theoretical proof of the existence of the basic set. They simply show that it is possible to formulate different assembly tasks in terms of a small set of about 10 modules, which may be regarded as an embryo of a basic set of elementary modules.Comparing this set with Kondoleon’s tasks and with Balch’s general-purpose robot routines, we observed that ours was general enough to represent 80% of the most com­mon manufacturing assembly tasks and ergonomical enough to be easily used by human operators or automatic planners. A final discussion shows that it would be possible to base an assembly programming language on this kind of set of basic behavioural modules

Power subsystem automation study

The purpose of the phase 2 of the power subsystem automation study was to demonstrate the feasibility of using computer software to manage an aspect of the electrical power subsystem on a space station. The state of the art in expert systems software was investigated in this study. This effort resulted in the demonstration of prototype expert system software for managing one aspect of a simulated space station power subsystem

Multimodal and ubiquitous computing systems: supporting independent-living older users

We document the rationale and design of a multimodal interface to a pervasive/ubiquitous computing system that supports independent living by older people in their own homes. The Millennium Home system involves fitting a resident’s home with sensors – these sensors can be used to trigger sequences of interaction with the resident to warn them about dangerous events, or to check if they need external help. We draw lessons from the design process and conclude the paper with implications for the design of multimodal interfaces to ubiquitous systems developed for the elderly and in healthcare, as well as for more general ubiquitous computing applications

A System for Controlling, Monitoring and Programming the Home

As technology becomes ever more pervasive, the challenges of home automation are increasingly apparent. Seamless home control, home monitoring and home programming by the end user have yet to enter the mainstream. This could be attributed to the challenge of developing a fully autonomous and extensible home system that can support devices and technologies of differing protocols and functionalities. In order to offer programming facilities to the user, the underlying rule system must be fully independent, allowing support for current and future devices. Additional challenges arise from the need to detect and handle conflicts that may arise among user rules and yield undesirable results. Non-technical individuals typically struggle when faced with a programming task. It is therefore vital to encourage and ease the process of programming the home. This thesis presents Homer, a home system that has been developed to support three key features of a home system: control, monitoring and programming. Homer supports any third-party hardware or software service that can expose its functionality through Java and conform to the Homer interface. Stand-alone end user interfaces can be written by developers to offer any of Homer's functionality. Where policies (i.e. rules) for the home are concerned, Homer offers a fully independent policy system. The thesis presents a custom policy language, Homeric, that has been designed specifically for writing home rules. The Homer policy system detects overlaps and conflicts among rules using constraint satisfaction and the effect on environment variables. The thesis also introduces the notion of perspectives to ease user interactivity. These have been integrated into Homer to accommodate the range of ways in which a user may think about different aspects and features of their home. These perspectives include location, device type, time and people-oriented points of view. Design guidelines are also discussed to aid end user programming of the home. The work presented in this thesis demonstrates a system that supports control, monitoring and programming of the home. Developers can quickly and easily add functionality to the home through components. Conflicts can be detected amongst rules within the home. Finally, design guidelines and a prototype interface have been developed to allow both technically minded and non-technical people to program their home

Integrated Real-Virtuality System and Environments for Advanced Control System Developers and Machines Builders

The pace of technological change is increasing and sophisticated customer driven markets are forcing rapid machine evolution, increasing complexity and quality, and faster response. To survive and thrive in these markets, machine builders/suppliers require absolute customer and market orientation, focusing on .. rapid provision of solutions rather than products. Their production systems will need to accommodate unpredictable changes while maintaining financial and operational efficiency with short lead and delivery times. Real-Virtuality (R-V) systems are an innovative environment to address these requirements by facilitating enhanced support in machine system design utilising integrated real-virtual environments centred on concurrent machine system development and realization. This environment supports not only machine system design but also the development of the' control system at the same time. Utilising the Real-Virtual Mapping Environment (RVMI;:), 3-D simulation machine models can perform actual machine operations in real-time when coupled with the real machine controller. This provides a more understandable, reliable and transparent machine function and performance. The research study explores different types of controller verification methods and proposes a new method which employs the use of a control signal emulator. The research study has fomulated a novel technique for emulating quadrature encoder signals to provide virtual closed loop control of servomotors. The deployment of a control signal emulator technique makes the system unique and removes its dependency on specific hardware. Enabling the real-time data from the signal emulation environment eases the task of realising a real-time machine simulator. To evaluate the proposed architecture, three case studies were performed. The results have shown that it is possible to create verified and validated machine control programs with no modification needed when applied to the real machine. The migration from the virtual to the real world is totally seamless. The result from the ????study show that the virtual machine is able to operate and respond as a real machine in real-time. This opens up the unexplored potential of integrated 3-D virtual technology. The real-time 3-D simulation virtual machine will enable commissioning and training to be conducted '!-t an earlier stage in the design process (without having to wait for the real machine to be built). Furthermore, various test scenarios can also be developed and tested on the system which helps to provide a better lofriderstanding of the machine behaviours and responses. This research study has made an original contribution in the field of machine system development. It has contributed a novel approach of using emulated control signals to provide machine control programmers with a platform to test their application programs at machine level which involves both discrete digital signals and continuous signals. The real-time virtual environment extends the application domain for the use of simulation. The architecture proposed is generic; to be exact it is not constrained to a specific industrial control system or to a specific simulation vendor

On Sensor-Controlled Robotized One-off Manufacturing

A semi-automatic task oriented system structure has been developed and tested on an arc welding application. In normal industrial robot programming, the path is created and the process is based upon the decided path. Here a process-oriented method is proposed instead. It is natural to focus on the process, since the path is in reality a result of process needs. Another benefit of choosing process focus, is that it automatically leads us into task oriented thoughts, which in turn can be split in sub-tasks, one for each part of the process with similar process-characteristics. By carefully choosing and encapsulating the information needed to execute a sub-task, this component can be re-used whenever the actual subtask occurs. By using virtual sensors and generic interfaces to robots and sensors, applications built upon the system design do not change between simulation and actual shop floor runs. The system allows a mix of real- and simulated components during simulation and run-time