Modelling and optimising micro-nozzle resin injection repair of impacted composites using CFD

Resin injection repair is identified to have a gap of knowledge and rigour in the modelling and execution of the process. We outline the strategy of our proposed predictive modelling strategy of ‘reconstruction-simulation-injection’ to simulate real cases to improve repair outcomes. We model the damage zone using Darcy’s law and determine permeability using two methods applied on the Kozeny-Carman equation. We then discuss how we evaluate porosity and detail two proposed methods on reconstructing the porosity field. We verify the model through simulation, and demonstrate verification using a novel comprehensive 2D porosity liquid-ideal gas phase flow model after deriving the analytical solution, which is a contribution of our work. Next, we apply the now-established model to reconstruct real damage cases using the two methods and compare them. We also calibrate the permeability parameter for the model by comparison to a simulation accuracy index, and also calibrate an ultrasonic scanning parameter to minimise reconstruction artefacts as well as the sensitivity of the reconstructed geometry characteristics to scan parameter variations. Then, we validate the model by simulating real repair cases and comparing them to the experimental outcomes, achieving simulation accuracy indices of about 70% or more. We demonstrate the application of the resin injection model by applying resin injection in a proof-of-concept simulation and use it for a case study, and examine the importance of hole configuration, vacuum usage as well as resin flow behaviour between inlet and outlet holes in the context of a given damage area geometry. It is important to maximise the total length of resin flow paths available, through carefully placing inlet and outlet holes, to allow resin to infiltrate the damage zone as much as possible. Vacuum increases the minimum achievable filling, and it is still invariably better to use vacuum with an optimal hole placement, instead of one or the other. In a second case study, we improve the predicted outcome by the model after intentionally changing the hole configuration to maximise resin infiltration, demonstrating that filling can be improved by placing holes intelligently (e.g. by using gathered information on the damage area, together with knowledge of how resin would flow). Using this, we conduct an optimisation study of the resin injection model by first setting up the optimisation strategy and carefully determining the methodology. The optimisation procedure is verified by using one and two degree-of-freedom optimisation cases, with known optima. Then, the optimisation strategy is applied to reconstructed repair cases to demonstrate and assess the efficacy of the optimisation procedure, with average reductions in unfilled volumes of approximately 28% compared to initial configurations.Open Acces

LOGICAL TOPOLOGY DESIGN FOR SURVIVABILITY IN IP-OVER-WDM NETWORKS

IP-over-WDM networks integrate Wavelength Division Multiplexing (WDM) technology with Internet Protocol (IP) and are widely regarded as the architecture for the next generation high-speed Internet. The problem of designing an IP-over-WDM network can be modeled as an embedding problem in which an IP network is embedded in a WDM network by establishing all optical paths between IP routers in the WDM network. Survivability is considered a vital requirement in such networks, which can be achieved by embedding the IP network in the WDM network in such a way that the IP network stays connected in the presence of failure or failures in the WDM network. Otherwise, some of the IP routers may not be reachable.The problem can be formulated as an Integer Linear Program (ILP), which can be solved optimally but is NP-complete. In this thesis, we have studied and proposed various efficient algorithms that can be used to make IP-over-WDM networks survivable in the presence of a single WDM link (optical fiber cable or cables) failure.First we evaluate an existing approach, named Survivable Mapping Algorithm by Ring Trimming (SMART), which provides survivability for an entire network by successively considering pieces of the network. The evaluation provides much insight into the approach, which allowed us to propose several enhancements. The modified approach with enhancements leads to better performance than the original SMART.We have also proposed a hybrid algorithm that guarantees survivability, if the IP and the WDM networks are at least 2-edge connected. The algorithm uses a combination of proactive (protection) and reactive (restoration) mechanisms to obtain a survivable embedding for any given IP network in any given WDM network.Circuits and cutsets are dual concepts. SMART approach is based on circuits. The question then arises whether there exists a dual methodology based on cutsets. We investigate this question and provide much needed insight. We provide a unified algorithmic framework based on circuits and cutsets. We also provide new methodologies based on cutsets and give a new proof of correctnessof SMART. We also develop a method based on incidence sets that are a special case of cutsets. Noting that for some IP networks a survivable embedding may not exist, the option of adding new IP links is pursued. Comparative evaluations of all the algorithms through extensive simulations are also given in this dissertation

Survivability in layered networks

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.Cataloged from PDF version of thesis.Includes bibliographical references (p. 195-204).In layered networks, a single failure at the lower (physical) layer may cause multiple failures at the upper (logical) layer. As a result, traditional schemes that protect against single failures may not be effective in layered networks. This thesis studies the problem of maximizing network survivability in the layered setting, with a focus on optimizing the embedding of the logical network onto the physical network. In the first part of the thesis, we start with an investigation of the fundamental properties of layered networks, and show that basic network connectivity structures, such as cuts, paths and spanning trees, exhibit fundamentally different characteristics from their single-layer counterparts. This leads to our development of a new crosslayer survivability metric that properly quantifies the resilience of the layered network against physical failures. Using this new metric, we design algorithms to embed the logical network onto the physical network based on multi-commodity flows, to maximize the cross-layer survivability. In the second part of the thesis, we extend our model to a random failure setting and study the cross-layer reliability of the networks, defined to be the probability that the upper layer network stays connected under the random failure events. We generalize the classical polynomial expression for network reliability to the layered setting. Using Monte-Carlo techniques, we develop efficient algorithms to compute an approximate polynomial expression for reliability, as a function of the link failure probability. The construction of the polynomial eliminates the need to resample when the cross-layer reliability under different link failure probabilities is assessed. Furthermore, the polynomial expression provides important insight into the connection between the link failure probability, the cross-layer reliability and the structure of a layered network. We show that in general the optimal embedding depends on the link failure probability, and characterize the properties of embeddings that maximize the reliability under different failure probability regimes. Based on these results, we propose new iterative approaches to improve the reliability of the layered networks. We demonstrate via extensive simulations that these new approaches result in embeddings with significantly higher reliability than existing algorithms.by Kayi Lee.Ph.D

Performance of WDM transport networks

Wavelength division multiplexed point-to-point transport is becoming commonplace in wide area networks. With the expectation that the next step is end-to-end networking of wavelengths (in the optical domain without conversion to electronics), there is a need for new design techniques, a new understanding of the performance issues, and a new performance evaluation methodology in such networks. This paper describes approaches to that end, summarizes research results, and points to open problems

SynerCrete’18: interdisciplinary approaches for cement-based materials and structural concrete: synergizing expertise and bridging scales of space and time, vol. 2

info:eu-repo/semantics/publishedVersio

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

The Science and Technology of 3D Printing

Three-dimensional printing, or additive manufacturing, is an emerging manufacturing process. Research and development are being performed worldwide to provide a better understanding of the science and technology of 3D printing to make high-quality parts in a cost-effective and time-efficient manner. This book includes contemporary, unique, and impactful research on 3D printing from leading organizations worldwide

Computational Modelling of Concrete and Concrete Structures

Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures