A Flexible Framework for the Automatic Generation of SBST Programs

Software-based self-test (SBST) techniques are used to test processors and processor cores against permanent faults introduced by the manufacturing process or to perform in-field test in safety-critical applications. However, the generation of an SBST program is usually associated with high costs as it requires significant manual effort of a skilled engineer with in-depth knowledge about the processor under test. In this paper, we propose an approach for the automatic generation of SBST programs. First, we detail an automatic test pattern generation (ATPG) framework for the generation of functional test sequences. Second, we describe the extension of this framework with the concept of a validity checker module (VCM), which allows the specification of constraints with regard to the generated sequences. Third, we use the VCM to express typical constraints that exist when SBST is adopted for in-field test. In our experimental results, we evaluate the proposed approach with a microprocessor without interlocked pipeline stages (MIPS)-like microprocessor. The results show that the proposed method is the first approach able to automatically generate SBST programs for both end-of-manufacturing and in-field test whose fault efficiency is superior to those produced by state-of-the-art manual approaches

A fault-tolerant multiprocessor architecture for aircraft, volume 1

A fault-tolerant multiprocessor architecture is reported. This architecture, together with a comprehensive information system architecture, has important potential for future aircraft applications. A preliminary definition and assessment of a suitable multiprocessor architecture for such applications is developed

Functional Testing of Processor Cores in FPGA-Based Applications

Embedded processor cores, which are widely used in SRAM-based FPGA applications, are candidates for SEU (Single Event Upset)-induced faults and need to be tested occasionally during system exploitation. Verifying a processor core is a difficult task, due to its complexity and the lack of user knowledge about the core-implementation details. In user applications, processor cores are normally tested by executing some kind of functional test in which the individual processor's instructions are tested with a set of deterministic test patterns, and the results are then compared with the stored reference values. For practical reasons the number of test patterns and corresponding results is usually small, which inherently leads to low fault coverage. In this paper we develop a concept that combines the whole instruction-set test into a compact test sequence, which can then be repeated with different input test patterns. This improves the fault coverage considerably with no additional memory requirements

Design of an integrated airframe/propulsion control system architecture

The design of an integrated airframe/propulsion control system architecture is described. The design is based on a prevalidation methodology that uses both reliability and performance. A detailed account is given for the testing associated with a subset of the architecture and concludes with general observations of applying the methodology to the architecture

Fault-Independent Test-Generation for Software-Based Self-Testing

Software-based self-test (SBST) is being widely used in both manufacturing and in-the-field testing of processor-based devices and Systems-on-Chips. Unfortunately, the stuck-at fault model is increasingly inadequate to match the new and different types of defects in the most recent semiconductor technologies, while the explicit and separate targeting of every fault model in SBST is cumbersome due to the high complexity of the test-generation process, the lack of automation tools, and the high CPU-intensity of the fault-simulation process. Moreover, defects in advanced semiconductor technologies are not always covered by the most commonly used fault-models, and the probability of defect-escapes increases even more. To overcome these shortcomings we propose the first fault-independent method for generating software-based self-test procedures. The proposed method is almost fully automated, it offers high coverage of non- modeled faults by means of a novel SBST-oriented probabilistic metric, and it is very fast as it omits the time-consuming test- generation/fault-simulation processes. Extensive experiments on the OpenRISC OR1200 processor show the advantages of the proposed method

Innovative Techniques for Testing and Diagnosing SoCs

We rely upon the continued functioning of many electronic devices for our everyday welfare, usually embedding integrated circuits that are becoming even cheaper and smaller with improved features. Nowadays, microelectronics can integrate a working computer with CPU, memories, and even GPUs on a single die, namely System-On-Chip (SoC). SoCs are also employed on automotive safety-critical applications, but need to be tested thoroughly to comply with reliability standards, in particular the ISO26262 functional safety for road vehicles. The goal of this PhD. thesis is to improve SoC reliability by proposing innovative techniques for testing and diagnosing its internal modules: CPUs, memories, peripherals, and GPUs. The proposed approaches in the sequence appearing in this thesis are described as follows: 1. Embedded Memory Diagnosis: Memories are dense and complex circuits which are susceptible to design and manufacturing errors. Hence, it is important to understand the fault occurrence in the memory array. In practice, the logical and physical array representation differs due to an optimized design which adds enhancements to the device, namely scrambling. This part proposes an accurate memory diagnosis by showing the efforts of a software tool able to analyze test results, unscramble the memory array, map failing syndromes to cell locations, elaborate cumulative analysis, and elaborate a final fault model hypothesis. Several SRAM memory failing syndromes were analyzed as case studies gathered on an industrial automotive 32-bit SoC developed by STMicroelectronics. The tool displayed defects virtually, and results were confirmed by real photos taken from a microscope. 2. Functional Test Pattern Generation: The key for a successful test is the pattern applied to the device. They can be structural or functional; the former usually benefits from embedded test modules targeting manufacturing errors and is only effective before shipping the component to the client. The latter, on the other hand, can be applied during mission minimally impacting on performance but is penalized due to high generation time. However, functional test patterns may benefit for having different goals in functional mission mode. Part III of this PhD thesis proposes three different functional test pattern generation methods for CPU cores embedded in SoCs, targeting different test purposes, described as follows: a. Functional Stress Patterns: Are suitable for optimizing functional stress during I Operational-life Tests and Burn-in Screening for an optimal device reliability characterization b. Functional Power Hungry Patterns: Are suitable for determining functional peak power for strictly limiting the power of structural patterns during manufacturing tests, thus reducing premature device over-kill while delivering high test coverage c. Software-Based Self-Test Patterns: Combines the potentiality of structural patterns with functional ones, allowing its execution periodically during mission. In addition, an external hardware communicating with a devised SBST was proposed. It helps increasing in 3% the fault coverage by testing critical Hardly Functionally Testable Faults not covered by conventional SBST patterns. An automatic functional test pattern generation exploiting an evolutionary algorithm maximizing metrics related to stress, power, and fault coverage was employed in the above-mentioned approaches to quickly generate the desired patterns. The approaches were evaluated on two industrial cases developed by STMicroelectronics; 8051-based and a 32-bit Power Architecture SoCs. Results show that generation time was reduced upto 75% in comparison to older methodologies while increasing significantly the desired metrics. 3. Fault Injection in GPGPU: Fault injection mechanisms in semiconductor devices are suitable for generating structural patterns, testing and activating mitigation techniques, and validating robust hardware and software applications. GPGPUs are known for fast parallel computation used in high performance computing and advanced driver assistance where reliability is the key point. Moreover, GPGPU manufacturers do not provide design description code due to content secrecy. Therefore, commercial fault injectors using the GPGPU model is unfeasible, making radiation tests the only resource available, but are costly. In the last part of this thesis, we propose a software implemented fault injector able to inject bit-flip in memory elements of a real GPGPU. It exploits a software debugger tool and combines the C-CUDA grammar to wisely determine fault spots and apply bit-flip operations in program variables. The goal is to validate robust parallel algorithms by studying fault propagation or activating redundancy mechanisms they possibly embed. The effectiveness of the tool was evaluated on two robust applications: redundant parallel matrix multiplication and floating point Fast Fourier Transform

Fault tolerant architectures for integrated aircraft electronics systems, task 2

The architectural basis for an advanced fault tolerant on-board computer to succeed the current generation of fault tolerant computers is examined. The network error tolerant system architecture is studied with particular attention to intercluster configurations and communication protocols, and to refined reliability estimates. The diagnosis of faults, so that appropriate choices for reconfiguration can be made is discussed. The analysis relates particularly to the recognition of transient faults in a system with tasks at many levels of priority. The demand driven data-flow architecture, which appears to have possible application in fault tolerant systems is described and work investigating the feasibility of automatic generation of aircraft flight control programs from abstract specifications is reported

Fault-Independent Test-Generation for Software-Based Self-Testing

Software-based self-test (SBST) is being widely used in both manufacturing and in-the-field testing of processor-based devices and Systems-on-Chips. Unfortunately, the stuck-at fault model is increasingly inadequate to match the new and different types of defects in the most recent semiconductor technologies, while the explicit and separate targeting of every fault model in SBST is cumbersome due to the high complexity of the test-generation process, the lack of automation tools, and the high CPU-intensity of the fault-simulation process. Moreover, defects in advanced semiconductor technologies are not always covered by the most commonly used fault-models, and the probability of defect-escapes increases even more. To overcome these shortcomings we propose the first fault-independent SBST method. The proposed method is almost fully automated, it offers high coverage of non-modeled faults by means of a novel SBST-oriented probabilistic metric, and it is very fast as it omits the time-consuming test-generation/fault-simulation processes. Extensive experiments on the OpenRISC OR1200 processor show the advantages of the proposed method

Evolution of Test Programs Exploiting a FSM Processor Model

Microprocessor testing is becoming a challenging task, due to the increasing complexity of modern architectures. Nowadays, most architectures are tackled with a combination of scan chains and Software-Based Self-Test (SBST) methodologies. Among SBST techniques, evolutionary feedback-based ones prove effective in microprocessor testing: their main disadvantage, however, is the considerable time required to generate suitable test programs. A novel evolutionary-based approach, able to appreciably reduce the generation time, is presented. The proposed method exploits a high-level representation of the architecture under test and a dynamically built Finite State Machine (FSM) model to assess fault coverage without resorting to time-expensive simulations on low-level models. Experimental results, performed on an OpenRISC processor, show that the resulting test obtains a nearly complete fault coverage against the targeted fault mode

Fault-Independent Test-Generation for Software-Based Self-Testing

Software-based self-test (SBST) is being widely used in both manufacturing and in-the-field testing of processor-based devices and Systems-on-Chips. Unfortunately, the stuck-at fault model is increasingly inadequate to match the new and different types of defects in the most recent semiconductor technologies, while the explicit and separate targeting of every fault model in SBST is cumbersome due to the high complexity of the test-generation process, the lack of automation tools, and the high CPU-intensity of the fault-simulation process. Moreover, defects in advanced semiconductor technologies are not always covered by the most commonly used fault-models, and the probability of defect-escapes increases even more. To overcome these shortcomings we propose the first fault-independent SBST method. The proposed method is almost fully automated, it offers high coverage of non-modeled faults by means of a novel SBST-oriented probabilistic metric, and it is very fast as it omits the time-consuming test-generation/fault-simulation processes. Extensive experiments on the OpenRISC OR1200 processor show the advantages of the proposed method