HIGH-SPEED CONFLICT-FREE LAYERED LDPC DECODER FOR THE DVB-S2, -T2 AND -C2 STANDARDS

International audienceLayered decoding is known to provide efficient and highthroughput implementation of LDPC decoders. However, the implementation of layered architecture is not always straightforward because of memory update conflicts in the a posteriori information memory. In this paper, we focus our attention on a particular type of conflict that is due to multiple-diagonal sub-matrices in the DVB-S2, -T2 and -C2 parity-check matrices. We propose an original solution that combines repetition of the concerned layers and the write disable of the a posteriori information memory. The implementation of this solution on an FPGA-based LDPC decoder led to an average air throughput of 200 Mbit/s with a parallelism of 45 and a clock frequency of 300 MHz. Increasing the parallelism to 120 led to an average air throughput of 720 Mbit/s with a clock frequency of 400 MHz on CMOS technology

LDPC decoder architecture for DVB-S2 and DVB-S2X standards

International audienceA particular type of conflict due to multiple-diagonal sub-matrices in the DVB-S2 parity-check matrices is known to complicate the implementation of the layered decoder architecture. The new matrices proposed in DVB-S2X no longer use such sub-matrices. For implementing a decoder compliant both with DVB-S2 and DVB-S2X, we propose an elegant solution which overcomes this conflicts relying on an efficient write disable of the memories, allowing a straightforward implementation of layered LDPC decoders. The complexity and latency are further reduced by eliminating one barrel shifter. Compared with the existing solutions, complexity is reduced without performance degradation. Keywords—Low-Density Parity-Check (LDPC) code, memory conflict, layered decoder, DVB-S2, DVB-S2X

Research on high performance LDPC decoder

制度:新 ; 報告番号:甲3272号 ; 学位の種類:博士(工学) ; 授与年月日:2011/3/15 ; 早大学位記番号:新557

Conflict resolution for pipelined layered LDPC decoders

International audienceMany of the current LDPC implementations of DVB-S2, T2 or WiMAX standard use the so-called layered architecture combined with pipeline. However, the pipeline process may introduce memory access conflicts. The resolution of these conflicts requires careful scheduling combined with dedicated hardware and/or idle cycle insertion. In this paper, based on the DVB-T2 example, we explain explicitly how the scheduling can solve most of the pipeline conflicts. The two contributions of the paper are 1) how to split the matrix to relax the pipeline conflicts at a cost of a reduced maximum available parallelism 2) how to project the problem of the research of an efficient scheduling to the well-known "Travelling Salesman Problem" and use a genetic algorithm to solve it

Conflict Resolution by Matrix Reordering for DVB-T2 LDPC Decoders

International audienceLayered decoding is known to provide efficient and high-throughput implementation of LDPC decoders. However, the implementation of the layered architecture is not always straightforward because of the memory access conflicts in the a-posteriori information memory. In this paper, we focus our attention on a particular type of conflict introduced by the existence of multiple diagonal matrices in the DVB-T2 parity check matrix structure. We illustrate how the reordering of the matrix reduces the number of conflicts, at the cost of limiting the level of parallelism. We then propose a parity extending process to solve the remaining conflicts. Fixed point simulation results show coherent performance without modifying the layered architecture

Research on energy-efficient VLSI decoder for LDPC code

制度:新 ; 報告番号:甲3742号 ; 学位の種類:博士(工学) ; 授与年月日:2012/9/15 ; 早大学位記番号:新6113Waseda Universit

Hardware-Conscious Wireless Communication System Design

The work at hand is a selection of topics in efficient wireless communication system design, with topics logically divided into two groups.One group can be described as hardware designs conscious of their possibilities and limitations. In other words, it is about hardware that chooses its configuration and properties depending on the performance that needs to be delivered and the influence of external factors, with the goal of keeping the energy consumption as low as possible. Design parameters that trade off power with complexity are identified for analog, mixed signal and digital circuits, and implications of these tradeoffs are analyzed in detail. An analog front end and an LDPC channel decoder that adapt their parameters to the environment (e.g. fluctuating power level due to fading) are proposed, and it is analyzed how much power/energy these environment-adaptive structures save compared to non-adaptive designs made for the worst-case scenario. Additionally, the impact of ADC bit resolution on the energy efficiency of a massive MIMO system is examined in detail, with the goal of finding bit resolutions that maximize the energy efficiency under various system setups.In another group of themes, one can recognize systems where the system architect was conscious of fundamental limitations stemming from hardware.Put in another way, in these designs there is no attempt of tweaking or tuning the hardware. On the contrary, system design is performed so as to work around an existing and unchangeable hardware limitation. As a workaround for the problematic centralized topology, a massive MIMO base station based on the daisy chain topology is proposed and a method for signal processing tailored to the daisy chain setup is designed. In another example, a large group of cooperating relays is split into several smaller groups, each cooperatively performing relaying independently of the others. As cooperation consumes resources (such as bandwidth), splitting the system into smaller, independent cooperative parts helps save resources and is again an example of a workaround for an inherent limitation.From the analyses performed in this thesis, promising observations about hardware consciousness can be made. Adapting the structure of a hardware block to the environment can bring massive savings in energy, and simple workarounds prove to perform almost as good as the inherently limited designs, but with the limitation being successfully bypassed. As a general observation, it can be concluded that hardware consciousness pays off

Machine Learning for Multimedia Communications

Machine learning is revolutionizing the way multimedia information is processed and transmitted to users. After intensive and powerful training, some impressive efficiency/accuracy improvements have been made all over the transmission pipeline. For example, the high model capacity of the learning-based architectures enables us to accurately model the image and video behavior such that tremendous compression gains can be achieved. Similarly, error concealment, streaming strategy or even user perception modeling have widely benefited from the recent learningoriented developments. However, learning-based algorithms often imply drastic changes to the way data are represented or consumed, meaning that the overall pipeline can be affected even though a subpart of it is optimized. In this paper, we review the recent major advances that have been proposed all across the transmission chain, and we discuss their potential impact and the research challenges that they raise

Improve the Usability of Polar Codes: Code Construction, Performance Enhancement and Configurable Hardware

Error-correcting codes (ECC) have been widely used for forward error correction (FEC) in modern communication systems to dramatically reduce the signal-to-noise ratio (SNR) needed to achieve a given bit error rate (BER). Newly invented polar codes have attracted much interest because of their capacity-achieving potential, efficient encoder and decoder implementation, and flexible architecture design space.This dissertation is aimed at improving the usability of polar codes by providing a practical code design method, new approaches to improve the performance of polar code, and a configurable hardware design that adapts to various specifications. State-of-the-art polar codes are used to achieve extremely low error rates. In this work, high-performance FPGA is used in prototyping polar decoders to catch rare-case errors for error-correcting performance verification and error analysis. To discover the polarization characteristics and error patterns of polar codes, an FPGA emulation platform for belief-propagation (BP) decoding is built by a semi-automated construction flow. The FPGA-based emulation achieves significant speedup in large-scale experiments involving trillions of data frames. The platform is a key enabler of this work. The frozen set selection of polar codes, known as bit selection, is critical to the error-correcting performance of polar codes. A simulation-based in-order bit selection method is developed to evaluate the error rate of each bit using Monte Carlo simulations. The frozen set is selected based on the bit reliability ranking. The resulting code construction exhibits up to 1 dB coding gain with respect to the conventional bit selection. To further improve the coding gain of BP decoder for low-error-rate applications, the decoding error mechanisms are studied and analyzed, and the errors are classified based on their distinct signatures. Error detection is enabled by low-cost CRC concatenation, and post-processing algorithms targeting at each type of the error is designed to mitigate the vast majority of the decoding errors. The post-processor incurs only a small implementation overhead, but it provides more than an order of magnitude improvement of the error-correcting performance. The regularity of the BP decoder structure offers many hardware architecture choices. Silicon area, power consumption, throughput and latency can be traded to reach the optimal design points for practical use cases. A comprehensive design space exploration reveals several practical architectures at different design points. The scalability of each architecture is also evaluated based on the implementation candidates. For dynamic communication channels, such as wireless channels in the upcoming 5G applications, multiple codes of different lengths and code rates are needed to t varying channel conditions. To minimize implementation cost, a universal decoder architecture is proposed to support multiple codes through hardware reuse. A 40nm length- and rate-configurable polar decoder ASIC is demonstrated to fit various communication environments and service requirements.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/140817/1/shuangsh_1.pd

D11.2 Consolidated results on the performance limits of wireless communications

Deliverable D11.2 del projecte europeu NEWCOM#The report presents the Intermediate Results of N# JRAs on Performance Limits of Wireless Communications and highlights the fundamental issues that have been investigated by the WP1.1. The report illustrates the Joint Research Activities (JRAs) already identified during the first year of the project which are currently ongoing. For each activity there is a description, an illustration of the adherence and relevance with the identified fundamental open issues, a short presentation of the preliminary results, and a roadmap for the joint research work in the next year. Appendices for each JRA give technical details on the scientific activity in each JRA.Peer ReviewedPreprin