Measured impact of crooked traceroute

Data collected using traceroute-based algorithms underpins research into the Internet’s router-level topology, though it is possible to infer false links from this data. One source of false inference is the combination of per-flow load-balancing, in which more than one path is active from a given source to destination, and classic traceroute, which varies the UDP destination port number or ICMP checksum of successive probe packets, which can cause per-flow load-balancers to treat successive packets as distinct flows and forward them along different paths. Consequently, successive probe packets can solicit responses from unconnected routers, leading to the inference of false links. This paper examines the inaccuracies induced from such false inferences, both on macroscopic and ISP topology mapping. We collected macroscopic topology data to 365k destinations, with techniques that both do and do not try to capture load balancing phenomena.We then use alias resolution techniques to infer if a measurement artifact of classic traceroute induces a false router-level link. This technique detected that 2.71% and 0.76% of the links in our UDP and ICMP graphs were falsely inferred due to the presence of load-balancing. We conclude that most per-flow load-balancing does not induce false links when macroscopic topology is inferred using classic traceroute. The effect of false links on ISP topology mapping is possibly much worse, because the degrees of a tier-1 ISP’s routers derived from classic traceroute were inflated by a median factor of 2.9 as compared to those inferred with Paris traceroute

Automatic classification system of Raman spectra applied to pigments analysis

Raman spectroscopy is one of the few non-destructive techniques capable of identifying pigments in art works. Raman spectra contain powerful information that can be used to identify unknown compounds and their chemical structures. However, the analysis of spectral data comes with some difficulties, and therefore the spectral interpretation is not straightforward. Sometimes, there are very little differences in the spectral data concerning to specific identification objectives, for instance, in polymorphic discrimination or in the discrimination of natural and synthetic forms of certain pigments. Moreover, this discrimination is often performed manually so that the process can be repetitive, subjective and particularly time-consuming. The result is an increasing motivation to automate the identification process involved in the classification of pigments in paint. In this paper, we propose a system to automatically classify the spectral data into specific and well-known classes, i.e. reference classes. The proposal is based on a combination of chemometric techniques, which provides a powerful way to achieve spectral separability so that it is possible to discriminate between very similar spectra in an automatic way. In this regard, a decision-making algorithm was specifically developed to select the corresponding reference class with no user input, which was successfully validated using simulated spectra. The implemented methodology was used to classify Raman spectra of pigments commonly present in artist's paints in experimental cases, providing reliable and consistent results. Therefore, the presented system can play a good auxiliary role in the analysts' endpoint classification.Peer ReviewedPostprint (author's final draft

Comparison of species classification models of mass spectrometry data : kernel discriminant analysis vs. random forest : a case study of Afrormosia (Pericopsis elata (Harms) Meeuwen)

Rationale: The genus Pericopsis includes four tree species of which only Pericopsis elata (Harms) Meeuwen is of commercial interest. Enforcement officers might have difficulties discerning this CITES-listed species from some other tropical African timber species. Therefore, we tested several methods to separate and identify these species rapidly in order to enable customs officials to uncover illegal trade. In this study, two classification methods using Direct Analysis in Real Time (DART) ionization coupled with Time-of-Flight Mass Spectrometry (DART-TOFMS) data to discern between several species are presented. Methods: Metabolome profiles were collected using DART ionization coupled with TOFMS analysis of heartwood specimens of all four Pericopsis species and Haplormosia monophylla (Harms) Harms, Dalbergia melanoxylon Guill. & Perr. Harms, and Milicia excelsa (Welw.) C.C. Berg. In total, 95 specimens were analysed and the spectra evaluated. Kernel Discriminant Analysis (KDA) and Random Forest classification were used to discern the species. Results: DART-TOFMS spectra obtained from wood slivers and post-processing analysis using KDA and Random Forest classification separated Pericopsis elata from the other Pericopsis taxa and its lookalike timbers Haplormosia monophylla, Milicia excelsa, and Dalbergia melanoxylon. Only 50 ions were needed to achieve the highest accuracy. Conclusions: DART-TOFMS spectra of the taxa were reproducible and the results of the chemometric analysis provided comparable accuracy. Haplormosia monophylla was visually distinguished based on the heatmap and was excluded from further analysis. Both classification methods, KDA and Random Forest, were capable of distinguishing Pericopsis elata from the other Pericopsis taxa, Milicia excelsa, and Dalbergia melanoxylon, timbers that are commonly traded

Model transformations and Tool Integration

Model transformations are increasingly recognised as being of significant importance to many areas of software development and integration. Recent attention on model transformations has particularly focused on the OMGs Queries/Views/Transformations (QVT) Request for Proposals (RFP). In this paper I motivate the need for dedicated approaches to model transformations, particularly for the data involved in tool integration, outline the challenges involved, and then present a number of technologies and techniques which allow the construction of flexible, powerful and practical model transformations

Factors associated with the performance and cost-effectiveness of using lymphatic filariasis transmission assessment surveys for monitoring soil-transmitted helminths: a case study in Kenya.

Transmission assessment surveys (TAS) for lymphatic filariasis have been proposed as a platform to assess the impact of mass drug administration (MDA) on soil-transmitted helminths (STHs). This study used computer simulation and field data from pre- and post-MDA settings across Kenya to evaluate the performance and cost-effectiveness of the TAS design for STH assessment compared with alternative survey designs. Variations in the TAS design and different sample sizes and diagnostic methods were also evaluated. The district-level TAS design correctly classified more districts compared with standard STH designs in pre-MDA settings. Aggregating districts into larger evaluation units in a TAS design decreased performance, whereas age group sampled and sample size had minimal impact. The low diagnostic sensitivity of Kato-Katz and mini-FLOTAC methods was found to increase misclassification. We recommend using a district-level TAS among children 8-10 years of age to assess STH but suggest that key consideration is given to evaluation unit size

Towards a pivotal-based approach for business process alignment.

This article focuses on business process engineering, especially on alignment between business analysis and implementation. Through a business process management approach, different transformations interfere with process models in order to make them executable. To keep the consistency of process model from business model to IT model, we propose a pivotal metamodel-centric methodology. It aims at keeping or giving all requisite structural and semantic data needed to perform such transformations without loss of information. Through this we can ensure the alignment between business and IT. This article describes the concept of pivotal metamodel and proposes a methodology using such an approach. In addition, we present an example and the resulting benefits