39 research outputs found
Quality of service differentiation for multimedia delivery in wireless LANs
Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below:
1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss.
2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system.
3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic
Future Trends and Challenges for Mobile and Convergent Networks
Some traffic characteristics like real-time, location-based, and
community-inspired, as well as the exponential increase on the data traffic in
mobile networks, are challenging the academia and standardization communities
to manage these networks in completely novel and intelligent ways, otherwise,
current network infrastructures can not offer a connection service with an
acceptable quality for both emergent traffic demand and application requisites.
In this way, a very relevant research problem that needs to be addressed is how
a heterogeneous wireless access infrastructure should be controlled to offer a
network access with a proper level of quality for diverse flows ending at
multi-mode devices in mobile scenarios. The current chapter reviews recent
research and standardization work developed under the most used wireless access
technologies and mobile access proposals. It comprehensively outlines the
impact on the deployment of those technologies in future networking
environments, not only on the network performance but also in how the most
important requirements of several relevant players, such as, content providers,
network operators, and users/terminals can be addressed. Finally, the chapter
concludes referring the most notable aspects in how the environment of future
networks are expected to evolve like technology convergence, service
convergence, terminal convergence, market convergence, environmental awareness,
energy-efficiency, self-organized and intelligent infrastructure, as well as
the most important functional requisites to be addressed through that
infrastructure such as flow mobility, data offloading, load balancing and
vertical multihoming.Comment: In book 4G & Beyond: The Convergence of Networks, Devices and
Services, Nova Science Publishers, 201
Distributed Medium Access Control for QoS Support in Wireless Networks
With the rapid growth of multimedia applications and the advances of wireless communication technologies, quality-of-service (QoS) provisioning for multimedia services in heterogeneous wireless networks has been an important issue and drawn much attention from both academia and industry. Due to the hostile transmission environment and limited radio resources, QoS provisioning in wireless networks is much more complex and difficult than in its wired counterpart. Moreover, due to the lack of central controller in the networks, distributed network control is required, adding complexity to QoS provisioning. In this thesis, medium access control (MAC) with QoS provisioning is investigated for both single- and multi-hop wireless networks including wireless local area networks (WLANs), wireless ad hoc networks, and wireless mesh networks.
Originally designed for high-rate data traffic, a WLAN has limited capability to support delay-sensitive voice traffic, and the service for voice traffic may be impacted by data traffic load, resulting in delay violation or large delay variance. Aiming at addressing these limitations, we propose an efficient MAC scheme and a call admission control algorithm to provide guaranteed QoS for voice traffic and, at the same time, increase the voice capacity significantly compared with the current WLAN standard. In addition to supporting voice traffic, providing better services for data traffic in WLANs is another focus of our research. In the current WLANs, all the data traffic receives the same best-effort service, and it is difficult to provide further service differentiation for data traffic based on some specific requirements of customers or network service providers. In order to address this problem, we propose a novel token-based scheduling scheme, which provides great flexibility and facility to the network service provider for service class management.
As a WLAN has small coverage and cannot meet the growing demand for wireless service requiring
communications ``at anywhere and at anytime", a large scale multi-hop wireless network (e.g., wireless ad hoc
networks and wireless mesh networks) becomes a necessity. Due to the location-dependent contentions, a number of problems (e.g., hidden/exposed terminal problem, unfairness, and priority reversal problem) appear in a multi-hop wireless environment, posing more challenges for QoS provisioning. To address these challenges, we propose a novel busy-tone based distributed MAC scheme for wireless ad hoc networks, and a collision-free MAC scheme for wireless mesh networks, respectively, taking the different network characteristics into consideration. The proposed schemes enhance the QoS provisioning capability to real-time traffic and, at the same time, significantly improve the system throughput and fairness performance for data traffic, as compared with the most popular IEEE 802.11 MAC scheme
Energy Efficient and Cooperative Solutions for Next-Generation Wireless Networks
Energy efficiency is increasingly important for next-generation wireless systems due to the limited battery resources of mobile clients. While fourth generation cellular standards emphasize low client battery consumption, existing techniques do not explicitly focus on reducing power that is consumed when a client is actively communicating with the network. Based on high data rate demands of modern multimedia applications, active mode power consumption is expected to become a critical consideration for the development and deployment of future wireless technologies.
Another reason for focusing more attention on energy efficient studies is given by the relatively slow progress in battery technology and the growing quality of service requirements of multimedia applications. The disproportion between demanded and available battery capacity is becoming especially significant for small-scale mobile client devices, where wireless power consumption dominates within the total device power budget. To compensate for this growing gap, aggressive improvements in all aspects of wireless system design are necessary.
Recent work in this area indicates that joint link adaptation and resource allocation techniques optimizing energy efficient metrics can provide a considerable gain in client power consumption. Consequently, it is crucial to adapt state-of-the-art energy efficient approaches for practical use, as well as to illustrate the pros and cons associated with applying power-bandwidth optimization to improve client energy efficiency and develop insights for future research in this area. This constitutes the first objective of the present research.
Together with energy efficiency, next-generation cellular technologies are emphasizing stronger support for heterogeneous multimedia applications. Since the integration of diverse services within a single radio platform is expected to result in higher operator profits and, at the same time, reduce network management expenses, intensive research efforts have been invested into design principles of such networks. However, as wireless resources are limited and shared by clients, service integration may become challenging. A key element in such systems is the packet scheduler, which typically helps ensure that the individual quality of service requirements of wireless clients are satisfied.
In contrastingly different distributed wireless environments, random multiple access protocols are beginning to provide mechanisms for statistical quality of service assurance. However, there is currently a lack of comprehensive analytical frameworks which allow reliable control of the quality of service parameters for both cellular and local area networks. Providing such frameworks is therefore the second objective of this thesis. Additionally, the study addresses the simultaneous operation of a cellular and a local area network in spectrally intense metropolitan deployments and solves some related problems.
Further improving the performance of battery-driven mobile clients, cooperative communications are sought as a promising and practical concept. In particular, they are capable of mitigating the negative effects of fading in a wireless channel and are thus expected to enhance next-generation cellular networks in terms of client spectral and energy efficiencies. At the cell edges or in areas missing any supportive relaying infrastructure, client-based cooperative techniques are becoming even more important. As such, a mobile client with poor channel quality may take advantage of neighboring clients which would relay data on its behalf.
The key idea behind the concept of client relay is to provide flexible and distributed control over cooperative communications by the wireless clients themselves. By contrast to fully centralized control, this is expected to minimize overhead protocol signaling and hence ensure simpler implementation. Compared to infrastructure relay, client relay will also be cheaper to deploy. Developing the novel concept of client relay, proposing simple and feasible cooperation protocols, and analyzing the basic trade-offs behind client relay functionality become the third objective of this research.
Envisioning the evolution of cellular technologies beyond their fourth generation, it appears important to study a wireless network capable of supporting machine-to-machine applications. Recent standardization documents cover a plethora of machine-to-machine use cases, as they also outline the respective technical requirements and features according to the application or network environment. As follows from this activity, a smart grid is one of the primary machine-to-machine use cases that involves meters autonomously reporting usage and alarm information to the grid infrastructure to help reduce operational cost, as well as regulate a customer's utility usage.
The preliminary analysis of the reference smart grid scenario indicates weak system architecture components. For instance, the large population of machine-to-machine devices may connect nearly simultaneously to the wireless infrastructure and, consequently, suffer from excessive network entry delays. Another concern is the performance of cell-edge machine-to-machine devices with weak wireless links. Therefore, mitigating the above architecture vulnerabilities and improving the performance of future smart grid deployments is the fourth objective of this thesis.
Summarizing, this thesis is generally aimed at the improvement of energy efficient properties of mobile devices in next-generation wireless networks. The related research also embraces a novel cooperation technique where clients may assist each other to increase per-client and network-wide performance. Applying the proposed solutions, the operation time of mobile clients without recharging may be increased dramatically. Our approach incorporates both analytical and simulation components to evaluate complex interactions between the studied objectives. It brings important conclusions about energy efficient and cooperative client behaviors, which is crucial for further development of wireless communications technologies
Recommended from our members
Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues.
The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies).
The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks.
Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications.
The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way.
The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools.
This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks.
Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research.
It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites.
The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation
Improving the Performance of Wireless LANs
This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids
Optimization of the interoperability and dynamic spectrum management in mobile communications systems beyond 3G
The future wireless ecosystem will heterogeneously integrate a number of overlapped Radio
Access Technologies (RATs) through a common platform. A major challenge arising from the
heterogeneous network is the Radio Resource Management (RRM) strategy. A Common RRM
(CRRM) module is needed in order to provide a step toward network convergence. This work
aims at implementing HSDPA and IEEE 802.11e CRRM evaluation tools.
Innovative enhancements to IEEE 802.11e have been pursued on the application of cross-layer
signaling to improve Quality of Service (QoS) delivery, and provide more efficient usage of
radio resources by adapting such parameters as arbitrary interframe spacing, a differentiated
backoff procedure and transmission opportunities, as well as acknowledgment policies (where
the most advised block size was found to be 12). Besides, the proposed cross-layer algorithm
dynamically changes the size of the Arbitration Interframe Space (AIFS) and the Contention
Window (CW) duration according to a periodically obtained fairness measure based on the Signal
to Interference-plus-Noise Ratio (SINR) and transmission time, a delay constraint and the
collision rate of a given machine. The throughput was increased in 2 Mb/s for all the values of
the load that have been tested whilst satisfying more users than with the original standard. For
the ad hoc mode an analytical model was proposed that allows for investigating collision free
communications in a distributed environment.
The addition of extra frequency spectrum bands and an integrated CRRM that enables spectrum
aggregation was also addressed. RAT selection algorithms allow for determining the gains obtained
by using WiFi as a backup network for HSDPA. The proposed RAT selection algorithm
is based on the load of each system, without the need for a complex management system. Simulation
results show that, in such scenario, for high system loads, exploiting localization while
applying load suitability optimization based algorithm, can provide a marginal gain of up to
450 kb/s in the goodput. HSDPA was also studied in the context of cognitive radio, by considering
two co-located BSs operating at different frequencies (in the 2 and 5 GHz bands) in the
same cell. The system automatically chooses the frequency to serve each user with an optimal
General Multi-Band Scheduling (GMBS) algorithm. It was shown that enabling the access to
a secondary band, by using the proposed Integrated CRRM (iCRRM), an almost constant gain
near 30 % was obtained in the throughput with the proposed optimal solution, compared to a
system where users are first allocated in one of the two bands and later not able to handover
between the bands. In this context, future cognitive radio scenarios where IEEE 802.11e ad hoc
modes will be essential for giving access to the mobile users have been proposed
Recommended from our members
Analysis and improvement of medium access control protocols in wireless networks. Performance modelling and Quality-of-Service enhancement of IEEE 802.11e MAC in wireless local area networks under heterogeneous multimedia traffic.
In order to efficiently utilize the scarce wireless resource as well as keep up
with the ever-increasing demand for Quality-of-Service (QoS) of multimedia
applications, wireless networks are undergoing rapid development and dramatic
changes in the underlying technologies and protocols. The Medium Access Control
(MAC) protocol, which coordinates the channel access and data transmission of
wireless stations, plays a pivotal role in wireless networks.
Performance modelling and analysis has been and continues to be of great
theoretical and practical importance in the design and development of wireless
networks. This research is devoted to developing efficient and cost-effective
analytical tools for the performance analysis and enhancement of MAC protocols in
Wireless Local Area Networks (WLANs) under heterogeneous multimedia traffic.
To support the MAC-layer QoS in WLANs, the IEEE 802.11e Enhanced Distributed
Channel Access (EDCA) protocol has proposed three QoS differentiation schemes
in terms of Arbitrary Inter-Frame Space (AIFS), Contention Window (CW), and
Transmission Opportunity (TXOP). This research starts with the development of
new analytical models for the TXOP scheme specified in the EDCA protocol under
Poisson traffic. A dynamic TXOP scheme is then proposed to adjust the TXOP
limits according to the status of the transmission queue. Theoretical analysis and
simulation experiments show that the proposed dynamic scheme largely improves
the performance of TXOP. To evaluate the TXOP scheme in the presence of
ii
heterogeneous traffic, a versatile analytical model is developed to capture the traffic
heterogeneity and model the features of burst transmission. The performance results
highlight the importance of taking into account the heterogeneous traffic for the
accurate evaluation of the TXOP scheme in wireless multimedia networks.
To obtain a thorough and deep understanding of the performance attributes of
the EDCA protocol, a comprehensive analytical model is then proposed to
accommodate the integration of the three QoS schemes of EDCA in terms of AIFS,
CW, and TXOP under Poisson traffic. The performance results show that the TXOP
scheme can not only support service differentiation but also improve the network
performance, whereas the AIFS and CW schemes provide QoS differentiation only.
Moreover, the results demonstrate that the MAC buffer size has considerable impact
on the QoS performance of EDCA under Poisson traffic. To investigate the
performance of EDCA in wireless multimedia networks, an analytical model is
further developed for EDCA under heterogeneous traffic. The performance results
demonstrate the significant effects of heterogeneous traffic on the total delay and
frame losses of EDCA with different buffer sizes. Finally, an efficient admission
control scheme is presented for the IEEE 802.11e WLANs based on analytical
modelling and a game-theoretical approach. The admission control scheme can
maintain the system operation at an optimal point where the utility of the Access
Point (AP) is maximized with the QoS constraints of various users