IST-2000-30148 I-METRA: D3.1 Design, analysis and selection of suitable algorithms

This deliverable contains a description of the space-time coding algorithms to be simulated within the I-METRA project. Different families of algorithms have been selected and described in this document with the objective of evaluating their performance. One of the main objectives of the I-METRA project is to impact into the current standardisation efforts related to the introduction of Multiple Input Multiple Output (MIMO) configurations into the High Speed Downlink and Uplink Packet Access concepts of UMTS (HSDPA and HSUPA). This required a review of the current specifications for these systems and the analysis of the impact of the potential incorporation of the selected MIMO schemes.Preprin

Coded Parity Packet Transmission Method for Two Group Resource Allocation

Gap value control is investigated when the number of source and parity packets is adjusted in a concatenated coding scheme whilst keeping the overall coding rate fixed. Packet-based outer codes which are generated from bit-wise XOR combinations of the source packets are used to adjust the number of both source packets. Having the source packets, the number of parity packets, which are the bit-wise XOR combinations of the source packets can be adjusted such that the gap value, which measures the gap between the theoretical and the required signal-to-noise ratio (SNR), is controlled without changing the actual coding rate. Consequently, the required SNR reduces, yielding a lower required energy to realize the transmission data rate. Integrating this coding technique with a two-group resource allocation scheme renders efficient utilization of the total energy to further improve the data rates. With a relatively small-sized set of discrete data rates, the system throughput achieved by the proposed two-group loading scheme is observed to be approximately equal to that of the existing loading scheme, which is operated with a much larger set of discrete data rates. The gain obtained by the proposed scheme over the existing equal rate and equal energy loading scheme is approximately 5 dB. Furthermore, a successive interference cancellation scheme is also integrated with this coding technique, which can be used to decode and provide consecutive symbols for inter-symbol interference (ISI) and multiple access interference (MAI) mitigation. With this integrated scheme, the computational complexity is signi cantly reduced by eliminating matrix inversions. In the same manner, the proposed coding scheme is also incorporated into a novel fixed energy loading, which distributes packets over parallel channels, to control the gap value of the data rates although the SNR of each code channel varies from each other

Coded Parity Packet Transmission Method for Two Group Resource Allocation

Gap value control is investigated when the number of source and parity packets is adjusted in a concatenated coding scheme whilst keeping the overall coding rate fixed. Packet-based outer codes which are generated from bit-wise XOR combinations of the source packets are used to adjust the number of both source packets. Having the source packets, the number of parity packets, which are the bit-wise XOR combinations of the source packets can be adjusted such that the gap value, which measures the gap between the theoretical and the required signal-to-noise ratio (SNR), is controlled without changing the actual coding rate. Consequently, the required SNR reduces, yielding a lower required energy to realize the transmission data rate. Integrating this coding technique with a two-group resource allocation scheme renders efficient utilization of the total energy to further improve the data rates. With a relatively small-sized set of discrete data rates, the system throughput achieved by the proposed two-group loading scheme is observed to be approximately equal to that of the existing loading scheme, which is operated with a much larger set of discrete data rates. The gain obtained by the proposed scheme over the existing equal rate and equal energy loading scheme is approximately 5 dB. Furthermore, a successive interference cancellation scheme is also integrated with this coding technique, which can be used to decode and provide consecutive symbols for inter-symbol interference (ISI) and multiple access interference (MAI) mitigation. With this integrated scheme, the computational complexity is signi cantly reduced by eliminating matrix inversions. In the same manner, the proposed coding scheme is also incorporated into a novel fixed energy loading, which distributes packets over parallel channels, to control the gap value of the data rates although the SNR of each code channel varies from each other

Iterative partial-cancelling MMSE algorithms for W-CDMA MIMO-BLAST systems

This paper focuses on the usage of an enhanced equalization-based receiver for WCDMA (Wideband Code-Division Multiple Access) MIMO (Multiple Input, Multiple Output) BLAST (Bell Labs Layered Space Time)-type systems. The receiver is based on the MMSE (Minimum Mean Square Error) algorithm coupled with an IPC (Iterative Partial Cancellation) scheme. The scheme is tested in both an uncoded and coded setting, using the UMTS (Universal Mobile Telecommunications System) HSDPA (High Speed Downlink Packet Access) standard as a basis, and the reference UMTS environments.info:eu-repo/semantics/acceptedVersio

Esquemas de pré-codificação IA com IB-DFE para sistemas MC-CDMA

Mestrado em Engenharia Eletrónica e TelecomunicaçõesTo achieve high bit rates, needed to meet the quality of service requirements of future multimedia applications, multi-carrier code division multiple access (MC-CDMA) has been considered as a candidate air-interface. Interference alignment (IA) is a promising technique that allows high capacity gains in interfering channels. On the other hand, iterative block decision feedback equalization (IB-DFE) based receivers can efficiently exploit the inherent space-frequency diversity of the MIMO MC-CDMA systems. In this thesis we proposed an IA precoding at the transmitter with IB-DFE based processing at the receiver for MC-CDMA systems. The IA precoding is applied at chip level instead of the data symbols level, as in the conventional IA based systems. The receiver is designed in two steps: first the equalizers based on zero forcing (ZF) or minimum mean square error (MMSE) are used to remove the aligned users´ interference. Then and after a whitening noise process, an IB-DFE based equalizer is designed to remove both the residual inter-user aligned and inter-carrier interferences. The results have shown that the obtained performance is very close to the one obtained by the optimal matched filter, with few iterations at the receiver side.Para atingir maiores ritmos de transmissão, as futures aplicações multimédia necessitam de atingir a qualidade de serviço necessária. Para isso, o multi-carrier code division multiple access (MC-CDMA) tem sido apontado como um forte candidato para interface ar dos futuros sistemas celulares. O Interference Alignment (IA) ou alinhamento de interferência é uma técnica promissora que permite ter altos ganhos de capacidade em canais com interferência. Por outro lado, temos receptores baseados no conceito iterative block decision feedback equalization(IB-DFE) que conseguem tirar partido, de uma forma eficiente, da inerente diversidade espaço-frequência dos sistemas MIMO MC-CDMA. Nesta dissertação é implementada uma pré-codificação baseada no conceito de IA considerando três transmissores (ou estações base) juntamente, com um processamento IB-DFE no receptor para sistemas MC-CDMA.A pré-codificação é aplicada ao nível de chip em vez de ser aplicado ao nível dos dados. O receptor é projectado em dois passos: em primeiro lugar equalizadores baseados em ZF ou em MMSE são utilizados para remover a interferência alinhada dos restantes utilizadores. De seguida, e após aplicar um processo de branqueamento do ruído ao sinal à saída do primeiro equalizador, um segundo equalizador baseado em IB-DFE é projectado para remover a interferência inter-utilizador residual e também a interferência residual entre portadoras. Os resultados obtidos mostraram-se satisfatórios na remoção da interferência obtendo-se um desempenho muito próximo do obtido considerando um filtro adaptado

Unified Optimal Power Allocation Strategy for MIMO Candidates in 3GPP HSDPA

We compare the achievable throughput of time division multiple access (TDMA) multiple-input multiple-output (MIMO) schemes illustrated in the 3rd Generation Partnership Project (3GPP) MIMO technical report, versus the sum-rate capacity of space-time multiple access (STMA). These schemes have been proposed to improve the 3GPP high speed downlink packet access (HSDPA) channel by employing multiple antennas at both the base station and mobile stations. Our comparisons are performed in multi-user environments and are conducted using TDMA such as Qualcomms High Data Rate and HSDPA, which is a simpler technique than STMA. Furthermore, we present the unified optimal power allocation strategy for HSDPA MIMO schemes by exploiting the similarity of multiple antenna systems and multi-user channel problems.This paper has been supported in part by National Research Laboratory (NRL) program and in part by the Samsung Advanced Institute of Technology (SAIT). The material in this work was presented in part at CIC 2004, Seoul, Korea, Oct. 2004

Iterative H.264 Source and Channel Decoding Using Sphere Packing Modulation Aided Layered Steered Space-Time Codes

The conventional two-stage turbo-detection schemes generally suffer from a Bit Error Rate (BER) floor. In this paper we circumvent this deficiency by proposing a three-stage turbo detected Sphere Packing (SP) modulation aided Layered Steered Space-Time Coding (LSSTC) scheme for H.264 coded video transmission over correlated Rayleigh fading channels. The soft-bit assisted H.264 coded bit-stream is protected using low-complexity short-block codes (SBCs), combined with a rate-1 recursive inner precoder is employed as an intermediate code which has an infinite impulse response and hence beneficially spreads the extrinsic information across the constituent decoders. This allows us to avoid having a BER floor. Additionally, the convergence behaviour of this serially concatenated scheme is investigated with the aid of Extrinsic Information Transfer (EXIT) Charts. The proposed system exhibits an Eb/N0 gain of about 12 dB in comparison to the benchmark scheme carrying out iterative source-channel decoding as well as Layered Steered Space-Time Coding (LSSTC) aided Sphere Packing (SP)demodulation, but dispensing with the optimised SBCs

Mobile and Wireless Communications

Mobile and Wireless Communications have been one of the major revolutions of the late twentieth century. We are witnessing a very fast growth in these technologies where mobile and wireless communications have become so ubiquitous in our society and indispensable for our daily lives. The relentless demand for higher data rates with better quality of services to comply with state-of-the art applications has revolutionized the wireless communication field and led to the emergence of new technologies such as Bluetooth, WiFi, Wimax, Ultra wideband, OFDMA. Moreover, the market tendency confirms that this revolution is not ready to stop in the foreseen future. Mobile and wireless communications applications cover diverse areas including entertainment, industrialist, biomedical, medicine, safety and security, and others, which definitely are improving our daily life. Wireless communication network is a multidisciplinary field addressing different aspects raging from theoretical analysis, system architecture design, and hardware and software implementations. While different new applications are requiring higher data rates and better quality of service and prolonging the mobile battery life, new development and advanced research studies and systems and circuits designs are necessary to keep pace with the market requirements. This book covers the most advanced research and development topics in mobile and wireless communication networks. It is divided into two parts with a total of thirty-four stand-alone chapters covering various areas of wireless communications of special topics including: physical layer and network layer, access methods and scheduling, techniques and technologies, antenna and amplifier design, integrated circuit design, applications and systems. These chapters present advanced novel and cutting-edge results and development related to wireless communication offering the readers the opportunity to enrich their knowledge in specific topics as well as to explore the whole field of rapidly emerging mobile and wireless networks. We hope that this book will be useful for students, researchers and practitioners in their research studies