617 research outputs found
Terahertz Wireless Channels: A Holistic Survey on Measurement, Modeling, and Analysis
Terahertz (0.1-10 THz) communications are envisioned as a key technology for
sixth generation (6G) wireless systems. The study of underlying THz wireless
propagation channels provides the foundations for the development of reliable
THz communication systems and their applications. This article provides a
comprehensive overview of the study of THz wireless channels. First, the three
most popular THz channel measurement methodologies, namely, frequency-domain
channel measurement based on a vector network analyzer (VNA), time-domain
channel measurement based on sliding correlation, and time-domain channel
measurement based on THz pulses from time-domain spectroscopy (THz-TDS), are
introduced and compared. Current channel measurement systems and measurement
campaigns are reviewed. Then, existing channel modeling methodologies are
categorized into deterministic, stochastic, and hybrid approaches.
State-of-the-art THz channel models are analyzed, and the channel simulators
that are based on them are introduced. Next, an in-depth review of channel
characteristics in the THz band is presented. Finally, open problems and future
research directions for research studies on THz wireless channels for 6G are
elaborated.Comment: to appear in IEEE Communications Surveys and Tutorial
MIMO channel modelling and simulation for cellular and mobile-to-mobile
Recently, mobile-to-mobile (M2M) communications have received much attention due
to several emerging applications, such as wireless mobile ad hoc networks, relay-based
cellular networks, and dedicated short range communications (DSRC) for intelligent
transportation systems (e.g., IEEE 802.11p standard). Different from conventional
fixed-to-mobile (F2M) cellular systems, in M2M systems both the transmitter (Tx)
and receiver (Rx) are in motion and often equipped with low elevation antennas.
Multiple-input-multiple-output (MIMO) technologies, employing multiple antennas
at both the Tx and Rx, have widely been adopted for the third generation (3G) and
beyond-3G (B3G) F2M cellular systems due to their potential benefits of improving
coverage, link reliability, and overall system capacity. More recently, MIMO has been
receiving more and more attention for M2M systems as well.
Reliable knowledge of the propagation channel obtained from channel measurements
and corresponding channel models serve as the enabling foundation for the design
and analysis of MIMO F2M and M2M systems. Furthermore, the development of
accurate MIMO F2M and M2M channel simulation models plays a major role in the
practical simulation and performance evaluation of these systems. These form the
primary motivation behind our research on MIMO channel modelling and simulation
for F2M cellular and M2M communication systems.
In this thesis, we first propose a new wideband theoretical multiple-ring based MIMO
regular-shaped geometry-based stochastic model (RS-GBSM) for non-isotropic scattering
F2M macro-cell scenarios and then derive a generic space-time-frequency (STF)
correlation function (CF). The proposed theoretical reference wideband model can be
reduced to a narrowband one-ring model, a new closed-form STF CF of which is derived
as well. Narrowband and wideband sum-of-sinusoids (SoS) simulation models
are then developed, demonstrating a good agreement with the corresponding reference
models in terms of correlation functions.
Secondly, based on a well-known narrowband two-ring single-input single-output (SISO)
M2M channel reference model, we propose new deterministic and stochastic SoS simulation
models for non-isotropic scattering environments. The proposed deterministic
simulator is the first SISO M2M deterministic simulator with good performance, while
the proposed stochastic simulator outperforms the existing one in terms of fitting the
desired statistical properties of the corresponding reference model.
Thirdly, a new adaptive narrowband MIMO M2M RS-GBSM is proposed for nonisotropic
scattering environments. To the best of our knowledge, the proposed M2M
model is the first RS-GBSM that has the ability to study the impact of the vehicular
traffic density on channel statistics. From the proposed theoretical reference
model, we comprehensively investigate some important M2M channel statistics including
the STF CF, space-Doppler-frequency power spectral density, envelope level
crossing rate, and average fade duration. A close agreement between some channel
statistics obtained from the proposed reference model and measurement data is
observed, confirming the utility of our model.
Finally, we extend the above narrowband model to a new wideband MIMO M2M RSGBSM
with respect to the frequency-selectivity. The proposed wideband reference
model is validated by observing a good match between some statistical properties of
the theoretical model and available measurement data. From the wideband reference
model, we further design new wideband deterministic and stochastic SoS simulation
models. The proposed wideband simulators can be easily reduced to narrowband
ones. The utilities of the newly derived narrowband and wideband simulation models
are validated by comparing their statistical properties with those of the corresponding
reference models.
The proposed channel reference models and simulators are expected to be useful for
the design, testing, and performance evaluation of future MIMO cellular and M2M
communication systems.Scottish Funding Counci
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin
5G Uniform linear arrays with beamforming and spatial multiplexing at 28 GHz, 37 GHz, 64 GHz and 71 GHz for outdoor urban communication: A two-level approach
Multiple-input multiple-output (MIMO) spatial multiplexing and beamforming are regarded as key technology enablers for the fifth-generation (5G) millimeter wave (mmWave) mobile radio services. Spatial multiplexing requires sufficiently separated and incoherent antenna array elements, while in the case of beamforming, the antenna array elements need to be coherent and closely spaced. Extensive 28-, 60-, and 73-GHz ultra-wideband propagation measurements in cities of New York City and Austin have indicated formation of two or more spatial lobes for the angles-of-departure and angles-of-arrival even for line-of-sight (LOS) transmission, which is an advantageous feature of mmWave channels, indicating that the transmitting and receiving array antenna elements can be co-located, thus enabling a single architecture for both spatial multiplexing and beamforming. In this paper, a two-level beamforming architecture for uniform linear arrays is proposed that leverages the formation of these spatial lobes. The antenna array is composed of sub-arrays, and the impact of sub-array spacing on the spectral efficiency is investigated through simulations using a channel simulator named NYUSIM developed based on extensive measured data at mmWave frequencies. Simulation results indicate spectral efficiencies of 18.5–28.1 bits/s/Hz with a sub-array spacing of 16 wavelengths for an outdoor mmWave urban LOS channel. The spectral efficiencies obtained are for single-user (SU) MIMO transmission at the recently allocated 5G carrier frequencies in July 2016. The method and results in this paper are useful for designing antenna array architectures for 5G wireless systems
MIMO hardware simulator design for heterogeneous indoor environments using TGn channel models
10 pagesInternational audienceA wireless communication system can be tested either in actual conditions or by using a hardware simulator reproducing actual conditions. With a hardware simulator it is possible to freely simulate a desired type of a radio channel. This paper presents new frequency domain and time domain architectures for the digital block of a hardware simulator of Multiple-Input Multiple-Output (MIMO) propagation channels. This simulator can be used for Wireless Local Area Networks (WLAN) 802.11ac applications. It characterizes an indoor scenario using TGn channel models. After the description of the general characteristics of the hardware simulator, the new architectures of the digital block are presented and designed on a Xilinx Virtex-IV Field Programmable Gate Array (FPGA). Their accuracy, occupation on the FPGA and latency are analyzed
Heterogeneous Acceleration for 5G New Radio Channel Modelling Using FPGAs and GPUs
L'abstract è presente nell'allegato / the abstract is in the attachmen
Realistic geometry-based stochastic channel models for advanced wireless MIMO systems
The employment of multiple antennas at both the Transmitter (Tx) and Receiver (Rx)
enables the so-called Multiple-Input Multiple-Output (MIMO) technologies to greatly
improve the link reliability and increase the overall system capacity. MIMO has been
recommended to be employed in various advanced wireless communication systems,
e.g., the Fourth Generation (4G) wireless systems and beyond. For the successful
design, performance test, and simulation of MIMO wireless communication systems, a
thorough understanding of the underlying MIMO channels and corresponding models
are indispensable. The approach of geometry-based stochastic modelling has widely
been used due to its advantages, such as convenience for theoretical analysis and
mathematical tractability.
In addition, wireless Vehicle-to-Vehicle (V2V) communications play an important role
in mobile relay-based cellular networks, vehicular ad hoc networks, and intelligent
transportation systems. In V2V communication systems, both the Tx and Rx are
in motion and equipped with low elevation antennas. This is di erent from conventional
Fixed-to-Mobile (F2M) cellular systems, where only one terminal moves. This
PhD project is therefore devoted to the modelling and simulation of wireless MIMO
channels for both V2V and F2M communication systems.
In this thesis, we rst propose a novel narrowband Three Dimensional (3D) theoretical
Regular-Shape Geometry Based Stochastic Model (RS-GBSM) and the corresponding
Sum-of-Sinusoids (SoS) simulation model for non-isotropic MIMO V2V Ricean fading
channels. The proposed RS-GBSM has the ability to study the impact of the Vehicular
Tra c Density (VTD) on channel statistics and jointly considers the azimuth
and elevation angles by using the von Mises-Fisher (VMF) distribution. Moreover, a
novel parameter computation method is proposed for jointly calculating the azimuth
and elevation angles in the SoS channel simulator. Based on the proposed 3D theoretical
RS-GBSM and its SoS simulation model, statistical properties are derived
and thoroughly investigated. The impact of the elevation angle in the 3D model on
key statistical properties is investigated by comparing with those of the corresponding
Two Dimensional (2D) model. It is demonstrated that the 3D model is more practical
to characterise real V2V channels, in particular for pico-cell scenarios.
Secondly, actual V2V channel measurements have shown that the modelling assumption
of Wide Sense Stationary (WSS) is valid only for very short time intervals. This fact inspires the requirement of non-WSS V2V channel models. Therefore, we propose
a novel 3D theoretical wideband MIMO non-WSS V2V RS-GBSM and corresponding
SoS simulation model. Due to the dynamic movement of both the Tx and Rx,
the Angle of Departure (AoD) and Angle of Arrival (AoA) are time-variant, which
makes our model non-stationary. The proposed RS-GBSMs are su ciently generic
and adaptable to mimic various V2V scenarios. Furthermore, important local channel
statistical properties are derived and thoroughly investigated. The impact of
non-stationarity on these channel statistical properties is investigated by comparing
with those of the corresponding WSS model. The proposed non-WSS RS-GBSMs are
validated by measurements in terms of the channel stationary time.
Thirdly, realistic MIMO channel models with a proper trade-o between accuracy
and complexity are indispensable for the practical application. By comparing the
accuracy and complexity of two latest F2M standardised channel models (i.e., LTE-A
and IMT-A channel models), we employ some channel statistical properties as the
accuracy metrics and the number of Real Operations (ROs) as the complexity metric.
It is shown that the LTE-A MIMO channel model is simple but has signi cant
aws
in terms of the accuracy. The IMT-A channel model is complicated but has better
accuracy. Therefore, we focus on investigating various complexity reduction methods
to simplify the IMT-A channel model. The results have shown that the proposed
methods do not degrade much the accuracy of the IMT-A channel model, whereas
they can signi cantly reduce the complexity in terms of the number of ROs and
channel coe cients computing time.
Finally, to investigate the non-stationarity of the IMT-A MIMO channel model, we
further propose a non-WSS channel model with time-varying AoDs and AoAs. The
proposed time-varying functions can be applied to various scenarios according to moving
features of Moving Clusters (MCs) and a Mobile Station (MS). Moreover, the impacts
of time-varying AoDs and AoAs on local statistical properties are investigated
thoroughly. Simulation results prove that statistical properties are varied with time
due to the non-stationarity of the proposed channel model.
In summary, the proposed reference models and channel simulators are useful for
the design, testing, and performance evaluation of advanced wireless V2V and F2M
MIMO communication systems
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin
Geometry-Based Channel Models for Car-to-Car Communication Systems and Applications
In last two decades, intelligent transportation systems (ITS) have received considerable attention due to new road traffic safety applications that significantly improve the efficiency of traffic flow and reduce the number of road accidents. Consequently, there has been an increased interest in studying and developing car-to-car (C2C) communication systems, which play a key role in ITS. C2C communications has also gained the attention of standardization bodies, such as the IEEE1 and 3GPP LTE2, which aim to provide improvements in C2C communication systems. As it follows from the title, in this dissertation, we present the state-of-the-art regarding the modeling and analysis of different C2C channels in C2C communication systems. In C2C communication systems, the underlying radio channel differs from the conventional fixed-to-mobile (F2M) and fixed-to-fixed (F2F) channels in the way that both the mobile transmitter and the mobile receiver are in motion. In this regard, reliable and robust traffic telematic systems have to be designed, developed and tested. This leads to a demand for new radio channel models for C2C communication systems. Therefore, this dissertation is devoted to design, develop and validate new geometry-based channel models for C2C communication systems. In particular, two goals are aimed, which are study and investigation of the propagation characteristics of C2C fading channels and analyzing the performance of C2C communication systems over those fading channels correlated in time and space.publishedVersio
- …