An event-triggered machine learning approach for accelerometer-based fall detection

The fixed-size non-overlapping sliding window (FNSW) and fixed-size overlapping sliding window (FOSW) approaches are the most commonly used data-segmentation techniques in machine learning-based fall detection using accelerometer sensors. However, these techniques do not segment by fall stages (pre-impact, impact, and post-impact) and thus useful information is lost, which may reduce the detection rate of the classifier. Aligning the segment with the fall stage is difficult, as the segment size varies. We propose an event-triggered machine learning (EvenT-ML) approach that aligns each fall stage so that the characteristic features of the fall stages are more easily recognized. To evaluate our approach, two publicly accessible datasets were used. Classification and regression tree (CART), k-nearest neighbor (k-NN), logistic regression (LR), and the support vector machine (SVM) were used to train the classifiers. EvenT-ML gives classifier F-scores of 98% for a chest-worn sensor and 92% for a waist-worn sensor, and significantly reduces the computational cost compared with the FNSW- and FOSW-based approaches, with reductions of up to 8-fold and 78-fold, respectively. EvenT-ML achieves a significantly better F-score than existing fall detection approaches. These results indicate that aligning feature segments with fall stages significantly increases the detection rate and reduces the computational cost

Design of Event-Triggered Fault-Tolerant Control for Stochastic Systems with Time-Delays

This paper proposes two novel, event-triggered fault-tolerant control strategies for a class of stochastic systems with state delays. The plant is disturbed by a Gaussian process, actuator faults, and unknown disturbances. First, a special case about fault signals that are coupled to the unknown disturbances is discussed, and then a fault-tolerant strategy is designed based on an event condition on system states. Subsequently, a send-on-delta transmission framework is established to deal with the problem of fault-tolerant control strategy against fault signals separated from the external disturbances. Two criteria are provided to design feedback controllers in order to guarantee that the systems are exponentially mean-square stable, and the corresponding H∞-norm disturbance attenuation levels are achieved. Two theorems were obtained by synthesizing the feedback control gains and the desired event conditions in terms of linear matrix inequalities (LMIs). Finally, two numerical examples are provided to illustrate the effectiveness of the proposed theoretical results

Elderly Fall Detection and Fall Direction Detection via Various Machine Learning Algorithms Using Wearable Sensors

The world population is aging rapidly. Some of the elderly live alone and it is observed that the elderly who live with their families frequently have to stay at home alone, especially during the working hours of adult members of the family. Falling while alone at home often results in fatal injuries and even death in elderly individuals. Fall detection systems detect falls and provide emergency healthcare services quickly. In this study, a two-step fall detection and fall direction detection system has been developed by using a public dataset and by testing 5 different machine learning algorithms comparatively. If a fall is detected in the first stage, the second stage is started and the direction of the fall is determined. In this way, the fall direction of the elderly individual can be determined for use in future researches, and a system that enables necessary measures such as opening an airbag in the direction of the fall is developed. Thus, a gradual fall detection and fall direction detection system has been developed by determining the best classifying algorithms. As a result, it has been determined that Ensemble Subspace k-NN classifier performs a little more successful classification compared to other classifiers. The classification via the test data corresponding to 30% of the total data, which was never used during the training phase, has been performed with 99.4% accuracy, and then 97.2% success has been achieved in determining the direction of falling

Latest research trends in gait analysis using wearable sensors and machine learning: a systematic review

Gait is the locomotion attained through the movement of limbs and gait analysis examines the patterns (normal/abnormal) depending on the gait cycle. It contributes to the development of various applications in the medical, security, sports, and fitness domains to improve the overall outcome. Among many available technologies, two emerging technologies that play a central role in modern day gait analysis are: A) wearable sensors which provide a convenient, efficient, and inexpensive way to collect data and B) Machine Learning Methods (MLMs) which enable high accuracy gait feature extraction for analysis. Given their prominent roles, this paper presents a review of the latest trends in gait analysis using wearable sensors and Machine Learning (ML). It explores the recent papers along with the publication details and key parameters such as sampling rates, MLMs, wearable sensors, number of sensors, and their locations. Furthermore, the paper provides recommendations for selecting a MLM, wearable sensor and its location for a specific application. Finally, it suggests some future directions for gait analysis and its applications

First advances in near fall detection and prediction when using a walker

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)Falls are a major concern to society. Several injuries associated with falls need medical care, and in the worst-case scenario, a fall can lead to death. These consequences have a high cost for the population. In order to overcome these problems, a diversity of approaches for detection, prediction, and prevention of falls have been tackled. Walkers are often prescribed to subjects who present a higher risk of falling. Thus, it is essential to develop strategies to enhance the user's safety in an imminent danger situation. In this sense, this dissertation aims to develop a strategy to detect a near fall (NF) and its direction as well as the detection of incipient near fall (INF) while the subject uses a walker. Furthermore, it has the purpose of detecting two gait events, the heel strike (HS) and the toe-off (TO). The strategies established, in this work, were based on the data gathered through an inertial sensor placed on the lower trunk and force sensors placed on the insoles. Following data collection, the methodology adopted to identify the situations aforementioned was based on machine learning algorithms. In order to reach the model with best performance, many combinations of different classifiers were tested with three feature selection methods. Regarding the detection of NF, the results achieved presented a Matthews Correlation Coefficient (MCC) of 79.99% being possible to detect a NF 1.76±0.76s before its end. With the implementation of the post-processing algorithm, a large part of the false positives was eliminated being able to detect all NF 1.48±0.68s before its end. Concerning the models built to distinguish the direction of the NF, the best model presented accuracy of 58.97% being unable to reliably distinguish the three fall directions. The methodology followed, in this work, was unsuccessful to detect an INF. The best model presented MCC=23.87%, in this case. Lastly, with respect to the detection of HS and TO events the best model reached MCC=86.94%. With the application of the post-processing algorithm, part of misclassified samples was eliminated, however, a delay in the detection of the HS and TO events was introduced. With the post-processing it was possible to reach MCC=88.82%, not including the imposed delay.As quedas representam uma grande preocupação para a sociedade. Várias lesões associadas às quedas necessitam de cuidados médicos e, no pior dos casos, uma queda pode levar à morte. Estas consequências traduzem-se em custos elevados para a população. A fim de ultrapassar estes problemas, várias abordagens têm sido endereçadas para deteção, previsão e prevenção das quedas. Os andarilhos são muitas vezes prescritos a sujeitos que apresentam um risco de queda maior. Desta forma, é essencial desenvolver estratégias para aumentar a segurança do utilizador perante uma situação de perigo iminente. Neste sentido, esta dissertação visa desenvolver uma estratégia que permita a deteção de uma quase queda (NF) e a sua direção, assim como a deteção incipiente de uma NF (INF). Para além disso, tem o objetivo de detetar dois eventos de marcha, o heel strike (HS) e o toe-off (TO). As estratégias definidas, neste trabalho, basearam-se nos dados recolhidos através de um sensor inercial posicionado no tronco inferior e de sensores de força colocados nas palmilhas. Após a aquisição dos dados, a metodologia adotada para identificar as situações anteriormente referidas foi baseada em algoritmos de machine learning. Com o intuito de obter o modelo com melhor desempenho, várias combinações de diferentes classificadores foram testadas com três métodos de seleção de features. No que concerne à deteção da NF, os resultados alcançados apresentaram um Matthews Correlation Coefficient (MCC) de 79.99% sendo possível detetar uma NF 1.76±0.76s antes do seu final. Com a implementação do algoritmo de pós-processamento, grande parte dos falsos positivos foram eliminados, sendo possível detetar todas as NF 1.48±0.68s antes do seu final. Em relação aos modelos construídos para distinguir a direção da NF, o melhor modelo apresentou uma precisão (ACC) de 59.97%. A metodologia seguida neste trabalho não foi bem sucedida na deteção INF. O melhor modelo apresentou um MCC=23.87%. Relativamente à deteção dos eventos, HS e TO, o melhor modelo atingiu um MCC=86.94%. Com a aplicação do algoritmo de pós-processamento parte das amostras mal classificadas foram eliminadas, no entanto, foi introduzido um atraso na deteção do HS e do TO. Com o pós-processamento foi possível obter um MCC=88.82%, não incluindo o atraso imposto pelo pós-processamento

Instrumentation of a cane to detect and prevent falls

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)The number of falls is growing as the main cause of injuries and deaths in the geriatric community. As a result, the cost of treating the injuries associated with falls is also increasing. Thus, the development of fall-related strategies with the capability of real-time monitoring without user restriction is imperative. Due to their advantages, daily life accessories can be a solution to embed fall-related systems, and canes are no exception. Moreover, gait assessment might be capable of enhancing the capability of cane usage for older cane users. Therefore, reducing, even more, the possibility of possible falls amongst them. Summing up, it is crucial the development of strategies that recognize states of fall, the step before a fall (pre-fall step) and the different cane events continuously throughout a stride. This thesis aims to develop strategies capable of identifying these situations based on a cane system that collects both inertial and force information, the Assistive Smart Cane (ASCane). The strategy regarding the detection of falls consisted of testing the data acquired with the ASCane with three different fixed multi-threshold fall detection algorithms, one dynamic multi-threshold and machine learning methods from the literature. They were tested and modified to account the use of a cane. The best performance resulted in a sensitivity and specificity of 96.90% and 98.98%, respectively. For the detection of the different cane events in controlled and real-life situations, a state-of-the-art finite-state-machine gait event detector was modified to account the use of a cane and benchmarked against a ground truth system. Moreover, a machine learning study was completed involving eight feature selection methods and nine different machine learning classifiers. Results have shown that the accuracy of the classifiers was quite acceptable and presented the best results with 98.32% of overall accuracy for controlled situations and 94.82% in daily-life situations. Regarding pre-fall step detection, the same machine learning approach was accomplished. The models were very accurate (Accuracy = 98.15%) and with the implementation of an online post-processing filter, all the false positive detections were eliminated, and a fall was able to be detected 1.019s before the end of the corresponding pre-fall step and 2.009s before impact.O número de quedas tornou-se uma das principais causas de lesões e mortes na comunidade geriátrica. Como resultado, o custo do tratamento das lesões também aumenta. Portanto, é necessário o desenvolvimento de estratégias relacionadas com quedas e que exibam capacidade de monitorização em tempo real sem colocar restrições ao usuário. Devido às suas vantagens, os acessórios do dia-a-dia podem ser uma solução para incorporar sistemas relacionados com quedas, sendo que as bengalas não são exceção. Além disso, a avaliação da marcha pode ser capaz de aprimorar a capacidade de uso de uma bengala para usuários mais idosos. Desta forma, é crucial o desenvolvimento de estratégias que reconheçam estados de queda, do passo anterior a uma queda e dos diferentes eventos da marcha de uma bengala. Esta dissertação tem como objetivo desenvolver estratégias capazes de identificar as situações anteriormente descritas com base num sistema incorporado numa bengala que coleta informações inerciais e de força, a Assistive Smart Cane (ASCane). A estratégia referente à deteção de quedas consistiu em testar os dados adquiridos através da ASCane com três algoritmos de deteção de quedas (baseados em thresholds fixos), com um algoritmo de thresholds dinâmicos e diferentes classificadores de machine learning encontrados na literatura. Estes métodos foram testados e modificados para dar conta do uso de informação adquirida através de uma bengala. O melhor desempenho alcançado em termos de sensibilidade e especificidade foi de 96,90% e 98,98%, respetivamente. Relativamente à deteção dos diferentes eventos da ASCane em situações controladas e da vida real, um detetor de eventos da marcha foi e comparado com um sistema de ground truth. Além disso, foi também realizado um estudo de machine learning envolvendo oito métodos de seleção de features e nove classificadores diferentes de machine learning. Os resultados mostraram que a precisão dos classificadores foi bastante aceitável e apresentou, como melhores resultados, 98,32% de precisão para situações controladas e 94.82% para situações do dia-a-dia. No que concerne à deteção de passos pré-queda, a mesma abordagem de machine learning foi realizada. Os modelos foram precisos (precisão = 98,15%) e com a implementação de um filtro de pós-processamento, todas as deteções de falsos positivos foram eliminadas e uma queda foi passível de ser detetada 1,019s antes do final do respetivo passo de pré-queda e 2.009s antes do impacto

Electronic textile garments for fall and near-fall detection

The world population is ageing and one of the biggest detriments to the quality of life of older people is falls. The aim of this thesis is to develop an electronic textiles (E-textile) garment using electronic yarn (E-yarn) technology for near-fall and fall detection. Near-falls are a loss of balance that can be corrected. An increased number in near-falls is seen as a precursor for falls. If near-falls can be detected, hopefully this can lead to fall prevention. The first step to creating an E-textile for near-fall was to determine the appropriate sensor for near-fall detection. Within the literature there are more studies conducted on fall detection systems rather than near-fall detection. Consequently, both types of system were reviewed. Informed by the literature, it was concluded that an inertial measurement unit (IMU) would be used to manufacturing a motion sensing E-yarn. Once the sensor had been determined, the optimal placement of the sensor on the body needed to be found. In accordance with the literature six locations were explored, the waist, chest, wrist, lower back, thigh and ankle. A pilot study was conducted, and the results showed that either the waist, thigh or ankle were best. Interviews and a focus group were held to design an E-textile garment that an older person would be willing to wear. Interviews on clothing preferences, attitudes towards falls, and wearable technology for fall prevention were conducted. Non-functioning prototypes were made and shared with a focus group to determine which would be used in the final design. The design chosen was an over-sock. Lastly, a functioning E-textile garment was developed and tested on young healthy volunteers. The E-textile garment can accurately classify between three types of activities of daily living and three type of falls with an accuracy of 85.7%. When classifying between ADLs and the falls, the accuracy of detection was 99.4%. Furthermore, when classifying between the ADLs, the falls, and a near-fall event an accuracy of 94.2% was achieved. This thesis contributes new knowledge to the field of E-textiles by using human centered design to create an E-textile garment people are willing to wear. It also has created the first near-fall and fall detection system in the form of an E-textile and presents the first E-yarn to contain an IMU