205 research outputs found
Interference charecterisation, location and bandwidth estimation in emerging WiFi networks
Wireless LAN technology based on the IEEE 802.11 standard, commonly referred
to as WiFi, has been hugely successful not only for the last hop access to the Internet
in home, office and hotspot scenarios but also for realising wireless backhaul in mesh
networks and for point -to -point long- distance wireless communication. This success
can be mainly attributed to two reasons: low cost of 802.11 hardware from reaching
economies of scale, and operation in the unlicensed bands of wireless spectrum.The popularity of WiFi, in particular for indoor wireless access at homes and offices,
has led to significant amount of research effort looking at the performance issues
arising from various factors, including interference, CSMA/CA based MAC protocol
used by 802.11 devices, the impact of link and physical layer overheads on application
performance, and spatio-temporal channel variations. These factors affect the performance
of applications and services that run over WiFi networks. In this thesis, we
experimentally investigate the effects of some of the above mentioned factors in the
context of emerging WiFi network scenarios such as multi- interface indoor mesh networks,
802.11n -based WiFi networks and WiFi networks with virtual access points
(VAPs). More specifically, this thesis comprises of four experimental characterisation
studies: (i) measure prevalence and severity of co- channel interference in urban WiFi
deployments; (ii) characterise interference in multi- interface indoor mesh networks;
(iii) study the effect of spatio-temporal channel variations, VAPs and multi -band operation
on WiFi fingerprinting based location estimation; and (iv) study the effects of
newly introduced features in 802.11n like frame aggregation (FA) on available bandwidth
estimation.With growing density of WiFi deployments especially in urban areas, co- channel
interference becomes a major factor that adversely affects network performance. To
characterise the nature of this phenomena at a city scale, we propose using a new measurement
methodology called mobile crowdsensing. The idea is to leverage commodity
smartphones and the natural mobility of people to characterise urban WiFi co- channel
interference. Specifically, we report measurement results obtained for Edinburgh, a
representative European city, on detecting the presence of deployed WiFi APs via the
mobile crowdsensing approach. These show that few channels in 2.4GHz are heavily
used and there is hardly any activity in the 5GHz band even though relatively it
has a greater number of available channels. Spatial analysis of spectrum usage reveals
that co- channel interference among nearby APs operating in the same channel
can be a serious problem with around 10 APs contending with each other in many locations. We find that the characteristics of WiFi deployments at city -scale are similar
to those of WiFi deployments in public spaces of different indoor environments. We
validate our approach in comparison with wardriving, and also show that our findings
generally match with previous studies based on other measurement approaches. As
an application of the mobile crowdsensing based urban WiFi monitoring, we outline a
cloud based WiFi router configuration service for better interference management with
global awareness in urban areas.For mesh networks, the use of multiple radio interfaces is widely seen as a practical
way to achieve high end -to -end network performance and better utilisation of
available spectrum. However this gives rise to another type of interference (referred to
as coexistence interference) due to co- location of multiple radio interfaces. We show
that such interference can be so severe that it prevents concurrent successful operation
of collocated interfaces even when they use channels from widely different frequency
bands. We propose the use of antenna polarisation to mitigate such interference and
experimentally study its benefits in both multi -band and single -band configurations. In
particular, we show that using differently polarised antennas on a multi -radio platform
can be a helpful counteracting mechanism for alleviating receiver blocking and adjacent
channel interference phenomena that underlie multi -radio coexistence interference.
We also validate observations about adjacent channel interference from previous
studies via direct and microscopic observation of MAC behaviour.Location is an indispensable information for navigation and sensing applications.
The rapidly growing adoption of smartphones has resulted in a plethora of mobile
applications that rely on position information (e.g., shopping apps that use user position
information to recommend products to users and help them to find what they want
in the store). WiFi fingerprinting is a popular and well studied approach for indoor
location estimation that leverages the existing WiFi infrastructure and works based on
the difference in strengths of the received AP signals at different locations. However,
understanding the impact of WiFi network deployment aspects such as multi -band
APs and VAPs has not received much attention in the literature. We first examine the
impact of various aspects underlying a WiFi fingerprinting system. Specifically, we
investigate different definitions for fingerprinting and location estimation algorithms
across different indoor environments ranging from a multi- storey office building to
shopping centres of different sizes. Our results show that the fingerprint definition
is as important as the choice of location estimation algorithm and there is no single
combination of these two that works across all environments or even all floors of a given environment. We then consider the effect of WiFi frequency bands (e.g., 2.4GHz
and 5GHz) and the presence of virtual access points (VAPs) on location accuracy with
WiFi fingerprinting. Our results demonstrate that lower co- channel interference in the
5GHz band yields more accurate location estimation. We show that the inclusion of
VAPs has a significant impact on the location accuracy of WiFi fingerprinting systems;
we analyse the potential reasons to explain the findings.End -to -end available bandwidth estimation (ABE) has a wide range of uses, from
adaptive application content delivery, transport-level transmission rate adaptation and
admission control to traffic engineering and peer node selection in peer -to- peer /overlay
networks [ 1, 2]. Given its importance, it has been received much research attention in
both wired data networks and legacy WiFi networks (based on 802.11 a/b /g standards),
resulting in different ABE techniques and tools proposed to optimise different criteria
and suit different scenarios. However, effects of new MAC/PHY layer enhancements
in new and next generation WiFi networks (based on 802.11n and 802.11ac
standards) have not been studied yet. We experimentally find that among different
new features like frame aggregation, channel bonding and MIMO modes (spacial division
multiplexing), frame aggregation has the most harmful effect as it has direct
effect on ABE by distorting the measurement probing traffic pattern commonly used
to estimate available bandwidth. Frame aggregation is also specified in both 802.11n
and 802.1 lac standards as a mandatory feature to be supported. We study the effect of
enabling frame aggregation, for the first time, on the performance of the ABE using an
indoor 802.11n wireless testbed. The analysis of results obtained using three tools -
representing two main Probe Rate Model (PRM) and Probe Gap Model (PGM) based
approaches for ABE - led us to come up with the two key principles of jumbo probes
and having longer measurement probe train sizes to counter the effects of aggregating
frames on the performance of ABE tools. Then, we develop a new tool, WBest+ that
is aware of the underlying frame aggregation by incorporating these principles. The
experimental evaluation of WBest+ shows more accurate ABE in the presence of frame
aggregation.Overall, the contributions of this thesis fall in three categories - experimental
characterisation, measurement techniques and mitigation/solution approaches for performance
problems in emerging WiFi network scenarios. The influence of various factors
mentioned above are all studied via experimental evaluation in a testbed or real - world setting. Specifically, co- existence interference characterisation and evaluation
of available bandwidth techniques are done using indoor testbeds, whereas characterisation of urban WiFi networks and WiFi fingerprinting based location estimation are
carried out in real environments. New measurement approaches are also introduced
to aid better experimental evaluation or proposed as new measurement tools. These
include mobile crowdsensing based WiFi monitoring; MAC/PHY layer monitoring of
co- existence interference; and WBest+ tool for available bandwidth estimation. Finally,
new mitigation approaches are proposed to address challenges and problems
identified throughout the characterisation studies. These include: a proposal for crowd - based interference management in large scale uncoordinated WiFi networks; exploiting
antenna polarisation diversity to remedy the effects of co- existence interference
in multi -interface platforms; taking advantage of VAPs and multi -band operation for
better location estimation; and introducing the jumbo frame concept and longer probe
train sizes to improve performance of ABE tools in next generation WiFi networks
Heuristic Based Planning Approach For Improving Wireless Network Coverage Of Multi-Storey Building
This thesis evaluates Wireless Local Area Network (WLAN), in terms of coverage, data rate, and overlapping co-channel interference. The aim of this research is to improve the WLAN coverage by implementing a wireless network planning simulation in multi-storey building. The work presented in this thesis was conducted on both on-site measurement and simulation. A modified theoretical path loss model was presented to estimate the path loss
between the transmitter and receiver in the simulation. The results of empirical model were compared with the results of theoretical model and display them in the form of contour visualization
Assessing Coexistence of IEEE 802.15.4 Networks and IEEE 802.11b/g/n Networks - A Study of Interference Effects
The study of the coexistence capabilities of networks based on the IEEE 802.11 and IEEE 802.15.4 standards has long been of interest to researchers owing to the individual success of these two technologies in various applications of Internet of Things (IoT). Operating in the same Industrial-Scientific-Medical (ISM) band, their coexistence does not always yield satisfactory results. The performance of a network based on IEEE 802.15.4 standard has been shown to be significantly lowered in the presence of a strong IEEE 802.11 based network (Wireless LAN) to the extent that communication based on the IEEE 802.15.4 standard can be rendered impossible in certain scenarios. This work is an effort towards analyzing interference caused by the three non-overlapping channels 1, 6 and 11 of IEEE 802.11b/g/n on the usable 2.4GHz spectrum of IEEE 802.15.4 standard. Recommendations of plausible scenarios for successful coexistence of these two networking technologies have been made. Assessment of the performance of an IEEE 802.15.4 standard based network through the Packet Delivery Ratio (PDR) on various channels of operation has yielded valuable insights. The experiments carried out in real-world environment stand as datapoints in predicting and understanding the interference behavior in real-life applications
Relative signal strength coverage optimization in indoor and outdoor wireless LAN environments
Fading and obstacles constitute major threats to effective quality of service (QoS) delivery in wireless local area network (WLAN) environments.
In this contribution, we investigate the signal quality of indoor and outdoor WLANs over a defined coverage area. We present experimental analysis of case studies that will be useful for further research and validate the system’s performance in practice.
Using an optimized form of the pathloss models, a simulation of the system is carried out over short and extended coverage. Simulation results show that signal quality could be effectively managed to improve the system’s performance for both indoor and outdoor environments in the presence of fading and other environmental factors.Facultad de Informátic
Experimental investigation of radio signal propagation in scientific facilities for telerobotic applications
Understanding the radio signal transmission characteristics in the environment where the telerobotic application is sought is a key part of achieving a reliable wireless communication link between a telerobot and a control station. In this paper, wireless communication requirements and a case study of a typical telerobotic application in an underground facility at CERN are presented. Then, the theoretical and experimental characteristics of radio propagation are investigated with respect to time, distance, location and surrounding objects. Based on analysis of the experimental findings, we show how a commercial wireless system, such as Wi-Fi, can be made suitable for a case study application at CERN
Centroid based 3D localization technique using RSSI with a mobile robot
Knowledge of sensor node 3D location in a sensor network is more important, because many practical applications needs to know the location of sensor data source. This paper presents a new technique for finding indoor 3D location of a sensor node by using Received Signal Strength Indication (RSSI). Proposed localization algorithm is derived from centroid algorithm with composition of empirical path loss model. It gives less error in estimating 3D location of sensor node in a sensor network when compared to its actual location. Algorithm has been implemented and analysed by using IITH motes and a Mobile Robot
- …