Performance Evaluation and Analysis of Effective Range and Data Throughput for Unmodified Bluetooth Communication Devices

The DoD and the Air Force continually seek to incorporate new technology in an effort to improve communication, work effectiveness, and efficiency. Office devices utilizing Bluetooth technology simplify device configuration and communication. They provide a means to communicate wirelessly over short distances thereby eliminating the need for different vendor specific cables and interfaces. One of the key concerns involved in incorporating new communication technology is security; the fundamental security concern of wireless communication is interception. Studies focusing on IEEE 802.11b have shown vulnerability zones around many DoD installations that reflect the ranges at which wireless communications using the 802.11b standard can be intercepted

A PROTOCOL SUITE FOR WIRELESS PERSONAL AREA NETWORKS

A Wireless Personal Area Network (WPAN) is an ad hoc network that consists of devices that surround an individual or an object. Bluetooth® technology is especially suitable for formation of WPANs due to the pervasiveness of devices with Bluetooth® chipsets, its operation in the unlicensed Industrial, Scientific, Medical (ISM) frequency band, and its interference resilience. Bluetooth® technology has great potential to become the de facto standard for communication between heterogeneous devices in WPANs. The piconet, which is the basic Bluetooth® networking unit, utilizes a Master/Slave (MS) configuration that permits only a single master and up to seven active slave devices. This structure limitation prevents Bluetooth® devices from directly participating in larger Mobile Ad Hoc Networks (MANETs) and Wireless Personal Area Networks (WPANs). In order to build larger Bluetooth® topologies, called scatternets, individual piconets must be interconnected. Since each piconet has a unique frequency hopping sequence, piconet interconnections are done by allowing some nodes, called bridges, to participate in more than one piconet. These bridge nodes divide their time between piconets by switching between Frequency Hopping (FH) channels and synchronizing to the piconet\u27s master. In this dissertation we address scatternet formation, routing, and security to make Bluetooth® scatternet communication feasible. We define criteria for efficient scatternet topologies, describe characteristics of different scatternet topology models as well as compare and contrast their properties, classify existing scatternet formation approaches based on the aforementioned models, and propose a distributed scatternet formation algorithm that efficiently forms a scatternet topology and is resilient to node failures. We propose a hybrid routing algorithm, using a bridge link agnostic approach, that provides on-demand discovery of destination devices by their address or by the services that devices provide to their peers, by extending the Service Discovery Protocol (SDP) to scatternets. We also propose a link level security scheme that provides secure communication between adjacent piconet masters, within what we call an Extended Scatternet Neighborhood (ESN)

Decentralized Federated Learning: Fundamentals, State-of-the-art, Frameworks, Trends, and Challenges

In the last decade, Federated Learning (FL) has gained relevance in training collaborative models without sharing sensitive data. Since its birth, Centralized FL (CFL) has been the most common approach in the literature, where a central entity creates a global model. However, a centralized approach leads to increased latency due to bottlenecks, heightened vulnerability to system failures, and trustworthiness concerns affecting the entity responsible for the global model creation. Decentralized Federated Learning (DFL) emerged to address these concerns by promoting decentralized model aggregation and minimizing reliance on centralized architectures. However, despite the work done in DFL, the literature has not (i) studied the main aspects differentiating DFL and CFL; (ii) analyzed DFL frameworks to create and evaluate new solutions; and (iii) reviewed application scenarios using DFL. Thus, this article identifies and analyzes the main fundamentals of DFL in terms of federation architectures, topologies, communication mechanisms, security approaches, and key performance indicators. Additionally, the paper at hand explores existing mechanisms to optimize critical DFL fundamentals. Then, the most relevant features of the current DFL frameworks are reviewed and compared. After that, it analyzes the most used DFL application scenarios, identifying solutions based on the fundamentals and frameworks previously defined. Finally, the evolution of existing DFL solutions is studied to provide a list of trends, lessons learned, and open challenges

Trade-offs between Distributed Ledger Technology Characteristics

When developing peer-to-peer applications on distributed ledger technology (DLT), a crucial decision is the selection of a suitable DLT design (e.g., Ethereum), because it is hard to change the underlying DLT design post hoc. To facilitate the selection of suitable DLT designs, we review DLT characteristics and identify trade-offs between them. Furthermore, we assess how DLT designs account for these trade-offs and we develop archetypes for DLT designs that cater to specific requirements of applications on DLT. The main purpose of our article is to introduce scientific and practical audiences to the intricacies of DLT designs and to support development of viable applications on DLT

The treatment of time in distributed simulation

Simulation is one of the most important tools to analyse, design, and operate complex processes and systems. Simulation allows us to make a 'trial and error' in order to understand a system and describe a problem. Therefore, it is of great interest to use simulation easily and practically. The advent of parallel processors and languages help simulation studies. A recent simulation trend is distributed simulation which may be called discrete- event simulation, because distributed simulation has a great potential for the speed-up. This thesis will survey discrete-event simulation and examine one particular algorithm. It will first survey simulation in general and secondly, distributed simulation. Distributed simulation has broadly two mechanisms: conservative and optimistic. The treatment of time in these mechanisms is different, we will look into both mechanisms. Finally, we will examine the conservative mechanism on a network of transputers using Occam. We will conclude with the result of the experiments and the perspective of distributed simulation

Transformations of High-Level Synthesis Codes for High-Performance Computing

Specialized hardware architectures promise a major step in performance and energy efficiency over the traditional load/store devices currently employed in large scale computing systems. The adoption of high-level synthesis (HLS) from languages such as C/C++ and OpenCL has greatly increased programmer productivity when designing for such platforms. While this has enabled a wider audience to target specialized hardware, the optimization principles known from traditional software design are no longer sufficient to implement high-performance codes. Fast and efficient codes for reconfigurable platforms are thus still challenging to design. To alleviate this, we present a set of optimizing transformations for HLS, targeting scalable and efficient architectures for high-performance computing (HPC) applications. Our work provides a toolbox for developers, where we systematically identify classes of transformations, the characteristics of their effect on the HLS code and the resulting hardware (e.g., increases data reuse or resource consumption), and the objectives that each transformation can target (e.g., resolve interface contention, or increase parallelism). We show how these can be used to efficiently exploit pipelining, on-chip distributed fast memory, and on-chip streaming dataflow, allowing for massively parallel architectures. To quantify the effect of our transformations, we use them to optimize a set of throughput-oriented FPGA kernels, demonstrating that our enhancements are sufficient to scale up parallelism within the hardware constraints. With the transformations covered, we hope to establish a common framework for performance engineers, compiler developers, and hardware developers, to tap into the performance potential offered by specialized hardware architectures using HLS

Mind the Gap: Trade-Offs between Distributed Ledger Technology Characteristics

When developing peer-to-peer applications on Distributed Ledger Technology (DLT), a crucial decision is the selection of a suitable DLT design (e.g., Ethereum) because it is hard to change the underlying DLT design post hoc. To facilitate the selection of suitable DLT designs, we review DLT characteristics and identify trade-offs between them. Furthermore, we assess how DLT designs account for these trade-offs and we develop archetypes for DLT designs that cater to specific quality requirements. The main purpose of our article is to introduce scientific and practical audiences to the intricacies of DLT designs and to support development of viable applications on DLT

The effect of infrastructure changes on railway operations.

This paper makes use of standard simulation programs in combination with the tools of applied statistics to simulate railway operations. The purpose of the use of this tool is to evaluate and compare different possible kinds of railway infrastructure, like different types of signaling procedures, different network configuration or operational procedures. A railway system is a logistic network and because of the demand for improved railway operation, much work has been undertaken lately in this scientific field. However the author postulates the hypothesis based on a literature review that in a lot of these works there is a lack of full application of statistics. With this paper the author makes use of standard simulation programs for detailed simulation of railway operation especially with respect to the signaling and operation procedures. Additionally the influence of delays, which occur during real life railway operation is taken into account for a first time. This allows statistical evaluation of the results based on statistical significance. Also sensitivity analysis could be performed. It is demonstrated, that the results of such simulation runs show superior results when compared to other techniques not taking into account the variability. Additionally, procedures were developed to find the capacity of a railway network with the help of additional software tools. In this work the software package ARENA is used to simulate the operation of trains in railway networks. For this approach two major obstacles have to be solved: the simulation of train travelling times and the simulation of block rules used in railway operation. By introduction of visualization the confidence in the results of simulation, even for stakeholders not familiar with this technique, is increased. In this paper it is shown that with ARENA it is possible to calculate the capacity of different railway networks (scenarios). The results, which are calculated using quasi steady state simulation without variation, are similar to those obtained with other calculation methods. Additionally in one scenario the rule of thumb for the quotient between theoretical capacity and practical capacity in a railway network is confirmed by simulation including random variation. It is also demonstrated that OptQuest, an additional software package available for ARENA, is a suitable tool to find near optimal timetables in a scenario including delays. The results of this work may be not only of interest for railway operators, but also for operators of other automated transport systems. Such systems may be unmanned transport vehicles in a factory, transporting goods between different manufacturing stations. But also for automation of road traffic the results may be of interest