63 research outputs found
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Resource Management in Converged Optical and Millimeter Wave Radio Networks: A Review
Three convergent processes are likely to shape the future of the internet beyond-5G: The convergence of optical and millimeter wave radio networks to boost mobile internet capacity, the convergence of machine learning solutions and communication technologies, and the convergence of virtualized and programmable network management mechanisms towards fully integrated autonomic network resource management. The integration of network virtualization technologies creates the incentive to customize and dynamically manage the resources of a network, making network functions, and storage capabilities at the edge key resources similar to the available bandwidth in network communication channels. Aiming to understand the relationship between resource management, virtualization, and the dense 5G access and fronthaul with an emphasis on converged radio and optical communications, this article presents a review of how resource management solutions have dealt with optimizing millimeter wave radio and optical resources from an autonomic network management perspective. A research agenda is also proposed by identifying current state-of-the-art solutions and the need to shift all the convergent issues towards building an advanced resource management mechanism for beyond-5G
Optical techniques for broadband in-building networks
Optical fibres, which can easily handle any bandwidth demand, have been rolled out to more than 32 million consumer’s homes and professional buildings worldwide up to 2010. The basic technological and economical challenges of fibre-to-the-home (FTTH) has been solved. The current FTTH technology can now providing baseband Gbit Ethernet and high definition TV services to the gates of homes. Thus, the bottleneck for delivery of broadband services to the end users is shifting from the access network to the in-building network. In the meantime, the need for high-capacity transmission between devices inside the building, e.g. between desktop PC and data services, are also rapidly increase. How to bring high bandwidth to the mobile terminals such as laptops, PDAs or cell phones as well as to the fixed terminals such as desktop PCs and HDTV equipment in an all-in-one network infrastructure is a challenge we are facing. Building on the flexibility of the wireless access networks and the latent vast bandwidth of a fibre infrastructure, radio-over-fibre (RoF) techniques have been proposed as a cost-effective solution to the future integrated broadband services in in-building networks. This thesis investigates techniques to deliver high data rate wireless services via in-building networks: high capacity RoF links employing optical frequency multiplication (OFM) and sub-carrier multiplexing (SCM) techniques, with single- or multi-carrier signal formats. The orthogonal frequency division multiplexing (OFDM) format is investigated for the RoF transmission system, particularly with regard to the optical system nonlinearity. For low-cost short-range optical backbone networks, RoF transmission over large-core diameter plastic optical fibre (POF) links has been studied, including the transmission of the WiMedia-compliant multiband OFDM UWB signal over bandwidth-limited large-core POF as well as a full-duplex bi-directional UWB transmission over POF. In order to improve the functionalities for delivery of wireless services of in-building networks, techniques to introduce flexibility into the network architecture and to create dynamic capacity allocation have been investigated. By employing optical switching techniques based on optical semiconductor amplifiers (SOA), an optically routed RoF system has been studied. The dynamic capacity allocation is addressed by investigating one-dimensional and two-dimensional routing using electrical SCM and optical wavelengths. In addition, next to RoF networking, this thesis explores techniques for wired delivery of baseband high capacity services over POF links by employing a multi-level signal modulation format, in particular discrete multi-tone (DMT) modulation. Transmission of 10 Gbit/s data over 1 mm core diameter PMMA POF links is demonstrated, as a competitor to more expensive fibre solutions such as silica single and multimode fibre. A record transmission rate of more than 40 Gbit/s is presented for POF whose core diameter is comparable with silica multimode fibre. Finally, from the network perspective, the convergence of wired and wireless multi-standard services into a single fibre-based infrastructure has been studied. Techniques have been designed and demonstrated for in-building networks, which can convey both high capacity baseband services and broadband radio frequency (RF) services over a POF backbone link. The multi-standard RoF signals carry different wireless services at different radio frequencies and with different bandwidths, including WiFi, WiMax, UMTS and UWB. System setups to carry them together over the same multimode optical fibre based network have been designed and experimentally shown. All the concepts, designs and system experiments presented in this thesis underline the strong potential of multimode (silica and plastic) optical fibre techniques for the delivery of broadband services to wired and wireless devices in in-building networks, in order to extend to the end user the benefits of the broadband FTTH networks which are being installed and deployed worldwide
Recommended from our members
Application priority framework for fixed mobile converged communication networks
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases
Modelling, Dimensioning and Optimization of 5G Communication Networks, Resources and Services
This reprint aims to collect state-of-the-art research contributions that address challenges in the emerging 5G networks design, dimensioning and optimization. Designing, dimensioning and optimization of communication networks resources and services have been an inseparable part of telecom network development. The latter must convey a large volume of traffic, providing service to traffic streams with highly differentiated requirements in terms of bit-rate and service time, required quality of service and quality of experience parameters. Such a communication infrastructure presents many important challenges, such as the study of necessary multi-layer cooperation, new protocols, performance evaluation of different network parts, low layer network design, network management and security issues, and new technologies in general, which will be discussed in this book
Geração e distribuição de sinais ROF
Mestrado em Engenharia Electrónica e TelecomunicaçõesO trabalho apresentado nesta dissertação incidiu no estudo de técnicas de geração e distribuição de sinais rádio sobre fibra (RoF).
Numa primeira fase estudaram-se os vários componentes associados ao canal óptico, para se perceber de que forma cada um deles afecta os sinais RoF que se propagam, e quais serão as principais limitações associadas.
No seguimento desse estudo inicial, efectuou-se trabalho experimental, de transmissão de sinais rádio (3G) sobre um sistema óptico mono-canal, para se observar e verificar os fenómenos limitativos identificados anteriormente.
Posteriormente, foi abordada a geração de sinais rádio por multiplicação de frequĂŞncia no domĂnio Ăłptico, com reduzido custo e complexidade, utilizando um modulador Mach-Zhender em regime nĂŁo-linear, considerando diferentes formatos de modulação. As simulações efectuadas incidiram na optimização das topologias e parâmetros associados aos diferentes componentes envolvidos, em particular na emissĂŁo e recepção.
Este trabalho serviu de base ao apresentado no capĂtulo 5, em que se simulou e optimizou um cenário de distribuição em rede Ăłptica passiva multi-canal, de sinais OFDM, compatĂveis com UWB, gerados por multiplicação de frequĂŞncia no domĂnio Ăłptico.The work presented in this dissertation focused on the study of techniques for the generation and distribution of radio signals over fiber (RoF).
Initially the various components associated to the optical channel were studied, to conclude how each of them affects the propagated RoF signals, and what are the key limitations associated.
Following this initial study, experimental work was carried out, the transmission of radio signals (3G) on a single-channel optical system was studied, to observe and verify the limiting phenomena identified earlier.
The next step was the generation of radio signals by frequency multiplication in the optical domain, with reduced cost and complexity, by using a Mach-Zehnder modulator in non-linear regime, considering different modulation formats. Several simulations were performed, focusing on optimizing topologies and parameters associated to the different components involved, especially in the transmitter and receiver.
The performed work was the basis to the concepts presented in Chapter 5, in which a distribution scenario involving a passive optical network with multi-channel OFDM signals, compatible with UWB, generated by frequency multiplication in the optical domain was simulated and optimized
Towards Context Information-based High-Performing Connectivity in Internet of Vehicle Communications
Internet-of-vehicles (IoV) is one of the most important use cases in the fifth generation (5G) of wireless networks and beyond. Here, IoV communications refer to two types of scenarios: serving the in-vehicle users with moving relays (MRs); and supporting vehicle-to-everything (V2X) communications for, e.g., connected vehicle functionalities. Both of them can be achieved by transceivers on top of vehicles with growing demand for quality of service (QoS), such as spectrum efficiency, peak data rate, and coverage probability. However, the performance of MRs and V2X is limited by challenges such as the inaccurate prediction/estimation of the channel state information (CSI), beamforming mismatch, and blockages. Knowing the environment and utilizing such context information to assist communication could alleviate these issues. This thesis investigates various context information-based performance enhancement schemes for IoV networks, with main contributions listed as follows.In order to mitigate the channel aging issue, i.e., the CSI becomes inaccurate soon at high speeds, the first part of the thesis focuses on one way to increase the prediction horizon of CSI in MRs: predictor antennas (PAs). A PA system is designed as a system with two sets of antennas on the roof of a vehicle, where the PAs positioned at the front of the vehicle are used to predict the CSI observed by the receive antennas (RAs) that are aligned behind the PAs. In PA systems, however, the benefit is affected by a variety of factors. For example, 1) spatial mismatch between the point where the PA estimates the channel and the point where the RA reaches several time slots later, 2) antenna utilization efficiency of the PA, 3) temporal evolution, and 4) estimation error of the PA-base station (BS) channel. First, in Paper A, we study the PA system in the presence of the spatial mismatch problem, and propose an analytical channel model which is used for rate adaptation. In paper B, we propose different approximation schemes for the analytical investigation of PA systems, and study the effect of different parameters on the network performance. Then, involving PAs into data transmission, Paper C and Paper D analyze the outage- and the delay-limited performance of PA systems using hybrid automatic repeat request (HARQ), respectively. As we show in the analytical and the simulation results in Papers C-D, the combination of PA and HARQ protocols makes it possible to improve spectral efficiency and adapt the transmission parameters to mitigate the effect of spatial mismatch. Finally, a review of PA studies in the literature, the challenges and potentials of PA as well as some to-be-solved issues are presented in Paper E.The second part of the thesis focuses on using advanced technologies to further improve the MR/IoV performance. In Paper F, a cooperative PA scheme in IoV networks is proposed to mitigate both the channel aging effect and blockage sensitivity in millimeter-wave channels by collaborative vehicles and BS handover. Then, in Paper G, we study the potentials and challenges of dynamic blockage pre-avoidance in IoV networks
Recommended from our members
Cognitive radio systems in LTE networks
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London.The most important fact in the mobile industry at the moment is that demand for wireless services will continue to expand in the coming years. Therefore, it is vital to find more spectrums through cognitive radios for the growing numbers of services and users. However, the spectrum reallocations, enhanced receivers, shared use, or secondary markets-will not likely, by themselves or in combination, meet the real exponential increases in demand for wireless resources. Network operators will also need to re-examine network architecture, and consider integrating the fibre and wireless networks to address this issue. This thesis involves driving fibre deeper into cognitive networks, deploying microcells connected through fibre infrastructure to the backbone LTE networks, and developing the algorithms for diverting calls between the wireless and fibre systems, introducing new coexistence models, and mobility management. This research addresses the network deployment scenarios to a microcell-aided cognitive network, specifically slicing the spectrum spatially and providing reliable coverage at either tier. The goal of this research is to propose new method of decentralized-to-distributed management techniques that overcomes the spectrum unavailability barrier overhead in ongoing and future deployments of multi-tiered cognitive network architectures. Such adjustments will propose new opportunities in cognitive radio-to-fibre systematic investment strategies. Specific contributions include:
1) Identifying the radio access technologies and radio over fibre solution for cognitive network infrastructure to increase the uplink capacity analysis in two-tier networks.
2) Coexistence of macro and microcells are studied to propose a roadmap for optimising the deployment of cognitive microcells inside LTE macrocells in the case of considering radio over fibre access systems.
3) New method for roaming mobiles moving between microcells and macrocell coverage areas is proposed for managing spectrum handover, operator database, authentication and accounting by introducing the channel assigning agent entity. The ultimate goal is to reduce unnecessary channel adaptation
- …