Adaptive fault-tolerant routing in hypercube multicomputers

A connected hypercube with faulty links and/or nodes is called an injured hypercube. To enable any non-faulty node to communicate with any other non-faulty node in an injured hypercube, the information on component failures has to be made available to non-faulty nodes so as to route messages around the faulty components. A distributed adaptive fault tolerant routing scheme is proposed for an injured hypercube in which each node is required to know only the condition of its own links. Despite its simplicity, this scheme is shown to be capable of routing messages successfully in an injured hypercube as long as the number of faulty components is less than n. Moreover, it is proved that this scheme routes messages via shortest paths with a rather high probabiltiy and the expected length of a resulting path is very close to that of a shortest path. Since the assumption that the number of faulty components is less than n in an n-dimensional hypercube might limit the usefulness of the above scheme, a routing scheme is introduced based on depth-first search which works in the presence of an arbitrary number of faulty components. Due to the insufficient information on faulty components, the paths chosen by the above scheme may not always be the shortest. To guarantee that all messages be routed via shortest paths, it is proposed that every mode be equipped with more information than that on its own links. The effects of this additional information on routing efficiency are analyzed, and the additional information to be kept at each node for the shortest path routing is determined. Several examples and remarks are also given to illustrate the results

A general analytical model of adaptive wormhole routing in k-ary n-cubes

Several analytical models of fully adaptive routing have recently been proposed for k-ary n-cubes and hypercube networks under the uniform traffic pattern. Although,hypercube is a special case of k-ary n-cubes topology, the modeling approach for hypercube is more accurate than karyn-cubes due to its simpler structure. This paper proposes a general analytical model to predict message latency in wormhole-routed k-ary n-cubes with fully adaptive routing that uses a similar modeling approach to hypercube. The analysis focuses Duato's fully adaptive routing algorithm [12], which is widely accepted as the most general algorithm for achieving adaptivity in wormhole-routed networks while allowing for an efficient router implementation. The proposed model is general enough that it can be used for hypercube and other fully adaptive routing algorithms

New Fault Tolerant Multicast Routing Techniques to Enhance Distributed-Memory Systems Performance

Distributed-memory systems are a key to achieve high performance computing and the most favorable architectures used in advanced research problems. Mesh connected multicomputer are one of the most popular architectures that have been implemented in many distributed-memory systems. These systems must support communication operations efficiently to achieve good performance. The wormhole switching technique has been widely used in design of distributed-memory systems in which the packet is divided into small flits. Also, the multicast communication has been widely used in distributed-memory systems which is one source node sends the same message to several destination nodes. Fault tolerance refers to the ability of the system to operate correctly in the presence of faults. Development of fault tolerant multicast routing algorithms in 2D mesh networks is an important issue. This dissertation presents, new fault tolerant multicast routing algorithms for distributed-memory systems performance using wormhole routed 2D mesh. These algorithms are described for fault tolerant routing in 2D mesh networks, but it can also be extended to other topologies. These algorithms are a combination of a unicast-based multicast algorithm and tree-based multicast algorithms. These algorithms works effectively for the most commonly encountered faults in mesh networks, f-rings, f-chains and concave fault regions. It is shown that the proposed routing algorithms are effective even in the presence of a large number of fault regions and large size of fault region. These algorithms are proved to be deadlock-free. Also, the problem of fault regions overlap is solved. Four essential performance metrics in mesh networks will be considered and calculated; also these algorithms are a limited-global-information-based multicasting which is a compromise of local-information-based approach and global-information-based approach. Data mining is used to validate the results and to enlarge the sample. The proposed new multicast routing techniques are used to enhance the performance of distributed-memory systems. Simulation results are presented to demonstrate the efficiency of the proposed algorithms

Performance modeling of fault-tolerant circuit-switched communication networks

Circuit switching (CS) has been suggested as an efficient switching method for supporting simultaneous communications (such as data, voice, and images) across parallel systems due to its ability to preserve both communication performance and fault-tolerant demands in such systems. In this paper we present an efficient scheme to capture the mean message latency in 2D torus with CS in the presence of faulty components. We have also conducted extensive simulation experiments, the results of which are used to validate the analytical mode

New fault-tolerant routing algorithms for k-ary n-cube networks

The interconnection network is one of the most crucial components in a multicomputer as it greatly influences the overall system performance. Networks belonging to the family of k-ary n-cubes (e.g., tori and hypercubes) have been widely adopted in practical machines due to their desirable properties, including a low diameter, symmetry, regularity, and ability to exploit communication locality found in many real-world parallel applications. A routing algorithm specifies how a message selects a path to cross from source to destination, and has great impact on network performance. Routing in fault-free networks has been extensively studied in the past. As the network size scales up the probability of processor and link failure also increases. It is therefore essential to design fault-tolerant routing algorithms that allow messages to reach their destinations even in the presence of faulty components (links and nodes). Although many fault-tolerant routing algorithms have been proposed for common multicomputer networks, e.g. hypercubes and meshes, little research has been devoted to developing fault-tolerant routing for well-known versions of k-ary n-cubes, such as 2 and 3- dimensional tori. Previous work on fault-tolerant routing has focused on designing algorithms with strict conditions imposed on the number of faulty components (nodes and links) or their locations in the network. Most existing fault-tolerant routing algorithms have assumed that a node knows either only the status of its neighbours (such a model is called local-information-based) or the status of all nodes (global-information-based). The main challenge is to devise a simple and efficient way of representing limited global fault information that allows optimal or near-optimal fault-tolerant routing. This thesis proposes two new limited-global-information-based fault-tolerant routing algorithms for k-ary n-cubes, namely the unsafety vectors and probability vectors algorithms. While the first algorithm uses a deterministic approach, which has been widely employed by other existing algorithms, the second algorithm is the first that uses probability-based fault- tolerant routing. These two algorithms have two important advantages over those already existing in the relevant literature. Both algorithms ensure fault-tolerance under relaxed assumptions, regarding the number of faulty components and their locations in the network. Furthermore, the new algorithms are more general in that they can easily be adapted to different topologies, including those that belong to the family of k-ary n-cubes (e.g. tori and hypercubes) and those that do not (e.g., generalised hypercubes and meshes). Since very little work has considered fault-tolerant routing in k-ary n-cubes, this study compares the relative performance merits of the two proposed algorithms, the unsafety and probability vectors, on these networks. The results reveal that for practical number of faulty nodes, both algorithms achieve good performance levels. However, the probability vectors algorithm has the advantage of being simpler to implement. Since previous research has focused mostly on the hypercube, this study adapts the new algorithms to the hypercube in order to conduct a comparative study against the recently proposed safety vectors algorithm. Results from extensive simulation experiments demonstrate that our algorithms exhibit superior performance in terms of reachability (chances of a message reaching its destination), deviation from optimality (average difference between minimum distance and actual routing distance), and looping (chances of a message continuously looping in the network without reaching destination) to the safety vectors